Avid Media Distribute 2.0 Configuration Guide

Media | Distribute

Installation and Configuration Guide

Legal Notices

Product specifications are subject to change without notice and do not represent a commitment on the part of Avid Technology, Inc.

This product is subject to the terms and conditions of a software license agreement provided with the software. The product may

only be used in accordance with the license agreement.

This product may be protected by one or more U.S. and non-U.S patents. Details are available at www.avid.com/patents

.

This document is protected under copyright law. An authorized licensee of Media | Distribute may reproduce this publication for the

licensee’s own use in learning how to use the software. This document may not be reproduced or distributed, in whole or in part, for

commercial purposes, such as selling copies of this document or providing support or educational services to others. This document

is supplied as a guide for [product name]. Reasonable care has been taken in preparing the information it contains. However, this

document may contain omissions, technical inaccuracies, or typographical errors. Avid Technology, Inc. does not accept

responsibility of any kind for customers’ losses due to the use of this document. Product specifications are subject to change without

notice.

This product includes FFmpeg, which is covered by the GNU Lesser General Public License.

This product includes software that is based in part of the work of the FreeType Team.

This software is based in part on the work of the Independent JPEG Group.

This product includes libjpeg-turbo, which is covered by the wxWindows Library License, Version 3.1.

P41-RR02188 by the National Institutes of Health.

1997, 1998, 1999, 2000, 2001, 2002, Thomas G. Lane. This software is based in part on the work of the Independent JPEG Group.

Johan Van den Brande.

Permission has been granted to copy, distribute and modify gd in any context without fee, including a commercial application,

provided that this notice is present in user-accessible supporting documentation.

This does not affect your ownership of the derived work itself, and the intent is to assure proper credit for the authors of gd, not to

interfere with your productive use of gd. If you have questions, ask. "Derived works" includes all programs that utilize the library.

Credit must be given in user-accessible documentation.

This software is provided "AS IS." The copyright holders disclaim all warranties, either express or implied, including but not limited to

implied warranties of merchantability and fitness for a particular purpose, with respect to this code and accompanying

documentation.

Although their code does not appear in gd, the authors wish to thank David Koblas, David Rowley, and Hutchison Avenue Software

Corporation for their prior contributions.

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)

Reserved. OpenLDAP is a registered trademark of the OpenLDAP Foundation.

Media | Distribute enables its users to access certain YouTube functionality, as a result of Avid's licensed use of YouTube's API. The

charges levied by Avid for use of Media | Distribute are imposed by Avid, not YouTube. YouTube does not charge users for accessing

YouTube site functionality through the YouTube APIs.

Media | Distribute uses the bitly API, but is neither developed nor endorsed by bitly.

Android is a trademark of Google Inc.

The following disclaimer is required by Apple Computer, Inc.:

APPLE COMPUTER, INC. MAKES NO WARRANTIES WHATSOEVER, EITHER EXPRESS OR IMPLIED, REGARDING THIS

PRODUCT, INCLUDING WARRANTIES WITH RESPECT TO ITS MERCHANTABILITY OR ITS FITNESS FOR ANY PARTICULAR

PURPOSE. THE EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES. THE ABOVE EXCLUSION

MAY NOT APPLY TO YOU. THIS WARRANTY PROVIDES YOU WITH SPECIFIC LEGAL RIGHTS. THERE MAY BE OTHER

RIGHTS THAT YOU MAY HAVE WHICH VARY FROM STATE TO STATE.

The following disclaimer is required by Sam Leffler and Silicon Graphics, Inc. for the use of their TIFF library:

Permission to use, copy, modify, distribute, and sell this software [i.e., the TIFF library] and its documentation for any purpose is

hereby granted without fee, provided that (i) the above copyright notices and this permission notice appear in all copies of the

software and related documentation, and (ii) the names of Sam Leffler and Silicon Graphics may not be used in any advertising or

publicity relating to the software without the specific, prior written permission of Sam Leffler and Silicon Graphics.

THE SOFTWARE IS PROVIDED “AS-IS” AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE,

INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR

CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR

PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING

OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

The following disclaimer is required by the Independent JPEG Group:

This software is based in part on the work of the Independent JPEG Group.

This Software may contain components licensed under the following conditions:

Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are

duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and

use acknowledge that the software was developed by the University of California, Berkeley. The name of the University may not be

used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS

PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby

granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice

appear in supporting documentation. This software is provided "as is" without express or implied warranty.

Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby

granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice

appear in supporting documentation. This software is provided "as is" without express or implied warranty.

Permission to use, copy, modify, distribute, and sell this software for any purpose is hereby granted without fee, provided that the

above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting

documentation, and that the name of Daniel Dardailler not be used in advertising or publicity pertaining to distribution of the software

without specific, written prior permission. Daniel Dardailler makes no representations about the suitability of this software for any

purpose. It is provided "as is" without express or implied warranty.

Permission to use, copy, modify, and distribute this software for any purpose without fee is hereby granted, provided that this entire

notice is included in all copies of any software which is or includes a copy or modification of this software and in all copies of the

supporting documentation for such software.

THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED WARRANTY. IN PARTICULAR,

NEITHER THE AUTHOR NOR AT&T MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE

MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.

This product includes software developed by the University of California, Berkeley and its contributors.

The following disclaimer is required by Nexidia Inc.:

trademarks are the property of their respective owners. All Nexidia materials regardless of form, including without limitation,

software applications, documentation and any other information relating to Nexidia Inc., and its products and services are the

exclusive property of Nexidia Inc. or its licensors. The Nexidia products and services described in these materials may be covered

by Nexidia's United States patents: 7,231,351; 7,263,484; 7,313,521; 7,324,939; 7,406,415, 7,475,065; 7,487,086 and/or other

patents pending and may be manufactured under license from the Georgia Tech Research Corporation USA.

The following disclaimer is required by Paradigm Matrix:

Portions of this software licensed from Paradigm Matrix.

The following disclaimer is required by Ray Sauers Associates, Inc.:

“Install-It” is licensed from Ray Sauers Associates, Inc. End-User is prohibited from taking any action to derive a source code

equivalent of “Install-It,” including by reverse assembly or reverse compilation, Ray Sauers Associates, Inc. shall in no event be liable

for any damages resulting from reseller’s failure to perform reseller’s obligation; or any damages arising from use or operation of

reseller’s products or the software; or any other damages, including but not limited to, incidental, direct, indirect, special or

consequential Damages including lost profits, or damages resulting from loss of use or inability to use reseller’s products or the

software for any reason including copyright or patent infringement, or lost data, even if Ray Sauers Associates has been advised,

knew or should have known of the possibility of such damages.

The following disclaimer is required by Videomedia, Inc.:

“Videomedia, Inc. makes no warranties whatsoever, either express or implied, regarding this product, including warranties with

respect to its merchantability or its fitness for any particular purpose.”

“This software contains V-LAN ver. 3.0 Command Protocols which communicate with V-LAN ver. 3.0 products developed by

Videomedia, Inc. and V-LAN ver. 3.0 compatible products developed by third parties under license from Videomedia, Inc. Use of this

software will allow “frame accurate” editing control of applicable videotape recorder decks, videodisc recorders/players and the like.”

The following disclaimer is required by Altura Software, Inc. for the use of its Mac2Win software and Sample Source

Code:

The following disclaimer is required by Ultimatte Corporation:

Certain real-time compositing capabilities are provided under a license of such technology from Ultimatte Corporation and are

subject to copyright protection.

The following disclaimer is required by 3Prong.com Inc.:

Certain waveform and vector monitoring capabilities are provided under a license from 3Prong.com Inc.

The following disclaimer is required by Interplay Entertainment Corp.:

The “Interplay” name is used with the permission of Interplay Entertainment Corp., which bears no responsibility for Avid products.

This product includes portions of the Alloy Look & Feel software from Incors GmbH.

This product includes software developed by the Apache Software Foundation (http://www.apache.org/

).

This product may include the JCifs library, for which the following notice applies:

Software directory on the installation CD.

Avid Interplay contains components licensed from LavanTech. These components may only be used as part of and in connection

with Avid Interplay.

Attn. Government User(s). Restricted Rights Legend

U.S. GOVERNMENT RESTRICTED RIGHTS. This Software and its documentation are “commercial computer software” or

“commercial computer software documentation.” In the event that such Software or documentation is acquired by or on behalf of a

unit or agency of the U.S. Government, all rights with respect to this Software and documentation are subject to the terms of the

License Agreement, pursuant to FAR §12.212(a) and/or DFARS §227.7202-1(a), as applicable.

Trademarks

003, 192 Digital I/O, 192 I/O, 96 I/O, 96i I/O, Adrenaline, AirSpeed, ALEX, Alienbrain, AME, AniMatte, Archive, Archive II, Assistant

Station, AudioPages, AudioStation, AutoLoop, AutoSync, Avid, Avid Active, Avid Advanced Response, Avid DNA, Avid DNxcel, Avid

DNxHD, Avid DS Assist Station, Avid Ignite, Avid Liquid, Avid Media Engine, Avid Media Processor, Avid MEDIArray, Avid Mojo, Avid

Remote Response, Avid Unity, Avid Unity ISIS, Avid VideoRAID, AvidRAID, AvidShare, AVIDstripe, AVX, Beat Detective, Beauty

Without The Bandwidth, Beyond Reality, BF Essentials, Bomb Factory, Bruno, C|24, CaptureManager, ChromaCurve,

ChromaWheel, Cineractive Engine, Cineractive Player, Cineractive Viewer, Color Conductor, Command|24, Command|8,

Control|24, Cosmonaut Voice, CountDown, d2, d3, DAE, D-Command, D-Control, Deko, DekoCast, D-Fi, D-fx, Digi 002, Digi 003,

DigiBase, Digidesign, Digidesign Audio Engine, Digidesign Development Partners, Digidesign Intelligent Noise Reduction,

Digidesign TDM Bus, DigiLink, DigiMeter, DigiPanner, DigiProNet, DigiRack, DigiSerial, DigiSnake, DigiSystem, Digital

Choreography, Digital Nonlinear Accelerator, DigiTest, DigiTranslator, DigiWear, DINR, DNxchange, Do More, DPP-1, D-Show, DSP

Manager, DS-StorageCalc, DV Toolkit, DVD Complete, D-Verb, Eleven, EM, Euphonix, EUCON, EveryPhase, Expander,

ExpertRender, Fader Pack, Fairchild, FastBreak, Fast Track, Film Cutter, FilmScribe, Flexevent, FluidMotion, Frame Chase, FXDeko,

HD Core, HD Process, HDpack, Home-to-Hollywood, HYBRID, HyperSPACE, HyperSPACE HDCAM, iKnowledge, Image

Independence, Impact, Improv, iNEWS, iNEWS Assign, iNEWS ControlAir, InGame, Instantwrite, Instinct, Intelligent Content

Management, Intelligent Digital Actor Technology, IntelliRender, Intelli-Sat, Intelli-sat Broadcasting Recording Manager, InterFX,

Interplay, inTONE, Intraframe, iS Expander, iS9, iS18, iS23, iS36, ISIS, IsoSync, LaunchPad, LeaderPlus, LFX, Lightning, Link &

Sync, ListSync, LKT-200, Lo-Fi, MachineControl, Magic Mask, Make Anything Hollywood, make manage move | media, Marquee,

MassivePack, Massive Pack Pro, Maxim, Mbox, Media Composer, MediaFlow, MediaLog, MediaMix, Media Reader, Media

Recorder, MEDIArray, MediaServer, MediaShare, MetaFuze, MetaSync, MIDI I/O, Mix Rack, Moviestar, MultiShell, NaturalMatch,

NewsCutter, NewsView, NewsVision, Nitris, NL3D, NLP, NSDOS, NSWIN, OMF, OMF Interchange, OMM, OnDVD, Open Media

Framework, Open Media Management, Painterly Effects, Palladium, Personal Q, PET, Podcast Factory, PowerSwap, PRE,

ProControl, ProEncode, Profiler, Pro Tools, Pro Tools|HD, Pro Tools LE, Pro Tools M-Powered, Pro Transfer, QuickPunch,

QuietDrive, Realtime Motion Synthesis, Recti-Fi, Reel Tape Delay, Reel Tape Flanger, Reel Tape Saturation, Reprise, Res Rocket

Surfer, Reso, RetroLoop, Reverb One, ReVibe, Revolution, rS9, rS18, RTAS, Salesview, Sci-Fi, Scorch, ScriptSync,

SecureProductionEnvironment, Serv|GT, Serv|LT, Shape-to-Shape, ShuttleCase, Sibelius, SimulPlay, SimulRecord, Slightly Rude

Compressor, Smack!, Soft SampleCell, Soft-Clip Limiter, SoundReplacer, SPACE, SPACEShift, SpectraGraph, SpectraMatte,

SteadyGlide, Streamfactory, Streamgenie, StreamRAID, SubCap, Sundance, Sundance Digital, SurroundScope, Symphony, SYNC

HD, SYNC I/O, Synchronic, SynchroScope, Syntax, TDM FlexCable, TechFlix, Tel-Ray, Thunder, TimeLiner, Titansync, Titan, TL

Aggro, TL AutoPan, TL Drum Rehab, TL Everyphase, TL Fauxlder, TL In Tune, TL MasterMeter, TL Metro, TL Space, TL Utilities,

tools for storytellers, Transit, TransJammer, Trillium Lane Labs, TruTouch, UnityRAID, Vari-Fi, Video the Web Way, VideoRAID,

VideoSPACE, VTEM, Work-N-Play, Xdeck, X-Form, Xmon and XPAND! are either registered trademarks or trademarks of Avid

Technology, Inc. in the United States and/or other countries.

Media | Distribute Installation and Configuration Guide • 9329-65404-00A • June 2014

Contents

Using This Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Chapter 1 Installation for Media | Distribute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Installing Media | Distribute in a Cluster Environment. . . . . . . . . . . . . . . . . . . . . . . . 10

Identifying the Master and Non-Master Nodes. . . . . . . . . . . . . . . . . . . . . . . . . . 11

Identifying the Virtual Cluster IP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Installing Media | Distribute on the Master Node . . . . . . . . . . . . . . . . . . . . . . . . 13

Upgrading Media | Distribute on the Master Node . . . . . . . . . . . . . . . . . . . . . . . 16

Removing Media | Distribute from the Master Node . . . . . . . . . . . . . . . . . . . . . 19

Configuring the Media | Distribute Installation on the Master Node . . . . . . . . . . 19

Installing Media | Distribute on Non-Master Nodes . . . . . . . . . . . . . . . . . . . . . . 21

Upgrading Media | Distribute on Non-Master Nodes . . . . . . . . . . . . . . . . . . . . . 22

Removing Media | Distribute from Non-Master Nodes. . . . . . . . . . . . . . . . . . . . 24

Configuring the Media | Distribute Installation on Non-Master Nodes . . . . . . . . 24

Verifying the Cluster Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Installing Media | Distribute on a Single Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Installing Media | Distribute on a Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Upgrading Media | Distribute on a Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Removing Media | Distribute from a Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Working with Media | Distribute Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Modifying Media | Distribute to Work with a Proxy Server . . . . . . . . . . . . . . . . . . . . 36

Chapter 2 Configuration for Media | Distribute . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Verifying Your Media | Distribute Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Assigning Media | Distribute Roles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

MediaCentral | UX Security for Media | Distribute. . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Configuring the Transcode Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Configuring MediaCentral | UX for Media | Distribute. . . . . . . . . . . . . . . . . . . . . 49

Configuring the Video Transcoding Host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

7

Send to Playback Configuration for Media | Distribute. . . . . . . . . . . . . . . . . . . . 56

Configuring a Telestream Vantage Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Validating the Vantage Transcode Route Configuration . . . . . . . . . . . . . . . . . . 62

Configuring the Harmonic ProMedia Carbon Transcoder . . . . . . . . . . . . . . . . . 68

Configuring a RadiantGrid Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Configuring an AAF Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

System Accounts for Media | Distribute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Bitly Link-Shortening Service Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Configuring a Twitter Publication Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Configuring a Facebook Publication Account. . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Configuring a Facebook Page Publication Account . . . . . . . . . . . . . . . . . . . . . . 90

Configuring a Vimeo Publication Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Configuring a YouTube Publication Account . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Configuring a Brightcove Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Configuring a Kaltura Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Configuring an Atex Polopoly Web CMS Account . . . . . . . . . . . . . . . . . . . . . . 106

Configuring a WorldNow Web CMS Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Configuring a Generic CMS Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Configuring a Generic OVP Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

User Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

Configuring a User Profile for a Personal Twitter Account. . . . . . . . . . . . . . . . 115

Configuring a User Profile for a Personal Facebook Account . . . . . . . . . . . . . 116

Appendix A Media | Distribute Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Chapter B Modifying the Transcoder Monitoring Interval . . . . . . . . . . . . . . . . . . . 125

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

Using This Guide

This guide is intended for users of MediaCentral | UX with the Media | Distribute feature. This

guide describes the installation and configuration procedures for Media Distribute, such as

installing the Media Distribute software and configuring system accounts.

For information on using the publishing features of Media Distribute, see the Avid

Media | Distribute User’s Guide or the MediaCentral | UX Help. For administrative information

for MediaCentral | UX, see the Avid MediaCentral | UX Administration Guide.

1 Installation for Media | Distribute

The supported configuration for Media Distribute requires you to install Media Distribute on

your MediaCentral | UX server, which is part of your MediaCentral configuration. For

installation information, see the Avid MediaCentral Platform Services Installation and

Configuration Guide.

Before you install Media Distribute, you must install and configure your MediaCentral server. If

you plan to process video or to use a content management system (CMS) account profile, you

must also install the Interplay Web Services. See “Installing Software for Interplay Web

Services” in the Interplay | Production Software Installation and Configuration Guide.

The Media Distribute installation procedures assume you have installed Avid MediaCentral

Platform Services (MCS). You must extract the Media Distribute installation package from

Media_Distribute_[version]Build[xx]_Linux.tar.gz. You run the installation file itself from a

shell script called install.sh. This installs the plug-in needed for MediaCentral UX to access the

Media Distribute functionality, as well as the avid-mpd service which provides the functionality

for Media Distribute workflows.

The procedures for installing Media Distribute depend on whether you install the application

components in a cluster environment or on a single MediaCentral server.

• If you deploy MCS and components on a master node and one or more non-master nodes in

a cluster configuration, see

“Installing Media | Distribute in a Cluster Environment” on

page 10

.

• If you deploy all MCS and components on a single server, see

“Installing Media | Distribute

on a Single Server” on page 27

.

The following installed components are necessary for the current version of Media Distribute:

• Avid MediaCentral Platform Services v2.0 (if you work with a cluster configuration, you

need to ensure that all nodes in the cluster function properly)

• iNEWS 3.4.3 or later (for MCS configurations with iNEWS

• Avid ISIS v4.6.1 driver

• Red Had Enterprise Linux (RHEL) v6.5

• Avid Interplay Web Services

• MediaCentral Distribution Service

Installing Media | Distribute in a Cluster Environment

10

You also need to ensure that the following are available for Media Distribute:

• Interplay Media Services Engine

• Interplay Transfer engine

• At least one installed transcode provider

• STP encoder

• Internet connection for publishing to social media sites

Installing Media | Distribute in a Cluster Environment

The procedures in this section assume you have already installed and configured your

MediaCentral Platform Services on your clustered servers. For more information on configuring

a MediaCentral cluster environment, see the Avid MediaCentral Platform Services Installation

and Configuration Guide. To configure Media Distribute, you require the following:

• RHEL and MediaCentral software components are installed on all servers in the cluster.

• All servers are set up and configured correctly for the cluster.

• Failover processes work correctly.

Installing Media Distribute entails the following steps:

• Copying the Media Distribute installation files to a USB drive.

• Identifying the master and non-master nodes in your configuration, and identifying the

virtual cluster IP address (see

“Identifying the Master and Non-Master Nodes” on page 11

and

“Identifying the Virtual Cluster IP” on page 12).

• Installing Media Distribute on the master and all non-master nodes in your cluster

configuration.

• Setting up the Media Distribute database on the master node of the cluster. You must install

Media Distribute on all nodes, but you only configure the database once.

• Modifying the MCS configuration file to change the host address to the virtual cluster IP of

the cluster.

After you have installed and configured Media Distribute on your master and non-master nodes,

you need to restart some MediaCentral Platform and Media Distribute services.

For master node installation procedures, see the following topics:

•

“Installing Media | Distribute on the Master Node” on page 13

• “Upgrading Media | Distribute on the Master Node” on page 16

Installing Media | Distribute in a Cluster Environment

11

• “Removing Media | Distribute from the Master Node” on page 19

• “Configuring the Media | Distribute Installation on the Master Node” on page 19

For non-master node installation procedures, see the following topics:

•

“Installing Media | Distribute on Non-Master Nodes” on page 21

• “Upgrading Media | Distribute on Non-Master Nodes” on page 22

• “Removing Media | Distribute from Non-Master Nodes” on page 24

• “Configuring the Media | Distribute Installation on Non-Master Nodes” on page 24

The Media Distribute software installation package file (Interplay_Pulse_[x.x].zip) is available

to Avid Support representatives only and can be downloaded from the Avid Gold Build

repository.

To prepare and mount a USB drive for Media Distribute installation:

1. On a Windows system, format a USB drive as a FAT32 volume.

2. Get the Media Distribute installation package file

(Media_Distribute_[version]Build[xx]_Linux.tar.gz) from your Avid representative.

3. Copy the compressed installation file to the USB drive.

4. Remove the USB device from the Windows system.

Identifying the Master and Non-Master Nodes

You can use the cluster resource monitoring command, crm, to verify which server functions as

the master node and which as the non-master nodes.

To identify the master and non-master nodes, do the following:

t Log in to any node in the cluster as root and open the cluster resource monitoring utility by

typing the following:

crm resource status

The status of all cluster-related services on all nodes displays in the terminal window.

The master and non-master nodes are indicated as the Master/Slave Set — for example:

Master/Slave Set: ms_drbd_postgres [drbd_postgres]

Masters: [ morpheus-hp1 ]

Slaves: [ morpheus-hp2 ]

Installing Media | Distribute in a Cluster Environment

12

Identifying the Virtual Cluster IP

Some configuration files used in the configuration of your Media Distribute installation require

the virtual cluster IP. This is required for the correct configuration of the Media Distribute

service in a cluster installation.

To identify the virtual cluster IP:

t Log in to the master node of the cluster and type the following command:

ifconfig

The output will look similar to the following:

eth0 Link encap:Ethernet HWaddr 00:26:55:E6:83:E1

inet addr:172.24.18.163 Bcast:172.24.18.255 Mask:255.255.255.0

inet6 addr: fe80::226:55ff:fee6:83e1/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:4321802 errors:0 dropped:0 overruns:0 frame:0

TX packets:3628475 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:1374391088 (1.2 GiB) TX bytes:1086706641 (1.0 GiB)

eth0:cl0 Link encap:Ethernet HWaddr 00:26:55:E6:83:E1

inet addr:172.24.18.61 Bcast:172.24.18.189 Mask:255.255.255.255

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

Interrupt:38 Memory:fbde0000-fbe00000

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

inet6 addr: ::1/128 Scope:Host

UP LOOPBACK RUNNING MTU:16436 Metric:1

RX packets:7331022 errors:0 dropped:0 overruns:0 frame:0

TX packets:7331022 errors:0 dropped:0 overruns:0 carrier:0

Installing Media | Distribute in a Cluster Environment

13

The virtual cluster IP is the IP assigned to the 'eth0:c10' network adapter. In this example,

the virtual cluster IP is 172.24.18.61.

Installing Media | Distribute on the Master Node

You must install Media Distribute first on the master node of the cluster since the database

service runs on this node. The installation includes creating a database for the Media Distribute

service. This can only be done on the node with the running PostgreSQL service.

If you want to upgrade an existing version of Media Distribute, see

“Upgrading

Media | Distribute on the Master Node” on page 16

.

c

The Media Distribute installation and configuration disconnects all users logged in to

MediaCentral UX when it restarts some services. Ensure that all users save their sessions

and log off during the installation or upgrade procedures.

To install Media Distribute on the master node:

1. Insert the Media Distribute installation USB drive into the master node server.

2. Verify the name of the device by typing the following command:

dmesg

Linux information relating to hardware appears on the screen.

Information for the USB device appears near the end of the output, near the list of SCSI

devices. The name of the USB device is found inside square brackets (e.g. sdc). This is the

name you use to mount the device.

3. Create a mount point for the USB device by typing the following:

mkdir /media/usb

4. Mount the USB key at the mount point you just created:

mount -t vfat /dev/sdc<?> /media/usb

n

The name of the USB device (sdc, in this case) takes a 1 (one) in the mount command. This

simply indicates a partition exists on the USB device. Formatting the USB device in Windows

created the partition.

The USB device is now mounted and available for use.

collisions:0 txqueuelen:0

RX bytes:8040287442 (7.4 GiB) TX bytes:8040287442 (7.4 GiB)

Installing Media | Distribute in a Cluster Environment

14

5. Verify the USB key has been mounted:

df -h

Information displays about all mounted file systems and devices, including information

about the USB device, similar to the following:

6. Create a directory for the installation files by typing the following command:

mkdir [target_directory]

7. Unpack the Media Distribute installaation file by typing the following command:

tar -xzf /media/usb/Media_Distribute_[version]Build[xx]_Linux.tar.gz

-directory [target_directory]

The compressed file extracts to a subfolder within the target directory called

Media_Distribute_[version]_Build_[xx]_Linux.

8. Run the installation script:

[target_directory]/Media_Distribute_[version]_Build_[xx]_Linux/

install.sh

9. Follow the prompts to install Media Distribute.

10. To verify the package has been installed, type the following:

rpm -qa | grep mpd

The output should include the following lines:

rpm -e avid-mpd-2.0.0. [Build]-avid.el6.1.noarch.rpm

rpm -e avid-media-central-mpd-2.0.0.[Build]-avid.el6.1.noarch.rpm

11. To prepare the Media Distribute database, type the following:

/usr/share/avid-mpd/dbmanage.sh user create

/usr/share/avid-mpd/dbmanage.sh schema create mpd

n

A default user in the PostgreSQL database is created with a user name of

mpduser

and a

password of

resudpm

. The necessary database tables and schema in PostgreSQL database are

also created.

12. Type the following to open the MediaCentral Configurator, and then ensure that the Media

Distribute plug-in is enabled within the Configurator:

/opt/avid/avid-interplay-central/configurator

File system Size Used Avail Use % Mounted on

/dev/sdc1 7.5 G 4.5 G 3.0 G 61 % /media/usb

Installing Media | Distribute in a Cluster Environment

15

13. To restart the MediaCentral service, type the following command:

service avid-interplay-central restart

14. To verify the verify the version of Media Distribute installed on your system, type the

following command:

/usr/share/apache-servicemix/bin/mpd_version

The command returns the installed versions of ServiceMix and Media Distribute. For

example:

ServiceMix Version: 4.5.1

MPD Version: 2.0.0.20140618_135830

MPD UI Version: 2.0.0.20140613_141334

15. To verify the ServiceMix installation, do the following:

a. Type the following

ssh Administrator@localhost -p 8101

b. Type

yes

to continue connecting to the host, and then type the default password

avid

.

c. Type

list

, and press Enter.

All account endpoints display as “Active” and the Social Media Integration route

displays as “Started.”

d. To quit ServiceMix, type

logout

.

Installing Media | Distribute in a Cluster Environment

16

16. To remove the installation files and unmount the USB drive, do the following:

a. Type

cd /

to ensure you are not currently on the USB key by changing to the root

directory.

b. Type the following:

rm -rf [target_directory]

umount /media/usb

c. Remove the USB drive from the server.

Upgrading Media | Distribute on the Master Node

The procedure for upgrading Media Distribute is similar to the one you used initially to install

Media Distribute. If you need to remove Media Distribute, see

“Removing Media | Distribute

from the Master Node” on page 19

.

c

The Media Distribute upgrade and configuration disconnects all users logged in to

MediaCentral UX when it restarts some services. Ensure that all users save their sessions

and log off during the installation or upgrade procedures.

To upgrade Media Distribute on the master node:

1. Insert the Media Distribute installation USB drive into the master node server.

2. Verify the name of the device by typing the following command:

dmesg

Linux information relating to hardware appears on the screen.

Information for the USB device appears near the end of the output, near the list of SCSI

devices. The name of the USB device is found inside square brackets (e.g. sdc). This is the

name you use to mount the device.

3. Create a mount point for the USB device by typing the following:

mkdir /media/usb

4. Mount the USB key at the mount point you just created:

mount -t vfat /dev/sdc<?> /media/usb

n

The name of the USB device (sdc, in this case) takes a 1 (one) in the mount command. This

simply indicates a partition exists on the USB device. Formatting the USB device in Windows

created the partition.

The USB device is now mounted and available for use.

Installing Media | Distribute in a Cluster Environment

17

5. Verify the USB key has been mounted:

df -h

Information displays about all mounted file systems and devices, including information

about the USB device, similar to the following:

6. Create a directory for the installation files by typing the following command:

mkdir [target_directory]

7. Unpack the Media Distribute installaation file by typing the following command:

tar -xzf /media/usb/Media_Distribute_[version]Build[xx]_Linux.tar.gz

-directory [target_directory]

The compressed file extracts to a subfolder within the target directory called

Media_Distribute_[version]_Build_[xx]_Linux.

8. Run the installation script to upgrade your Media Distribute installation:

[target_directory]/Media_Distribute_[version]_Build_[xx]_Linux/

install.sh

9. To verify the package has been installed, type the following:

rpm -qa | grep mpd

The output should include the following lines:

rpm -e avid-mpd-2.0.0. [Build]-avid.el6.1.noarch.rpm

rpm -e avid-media-central-mpd-2.0.0.[Build]-avid.el6.1.noarch.rpm

10. Type the following to open the MediaCentral Configurator, and then ensure that the Media

Distribute plug-in is enabled within the Configurator:

/opt/avid/avid-interplay-central/configurator

11. To restart the MediaCentral service, type the following command:

service avid-interplay-central restart

File system Size Used Avail Use % Mounted on

/dev/sdc1 7.5 G 4.5 G 3.0 G 61 % /media/usb

Installing Media | Distribute in a Cluster Environment

18

12. To verify the verify the version of Media Distribute installed on your system, type the

following command:

/usr/share/apache-servicemix/bin/mpd_version

The command returns the installed versions of ServiceMix and Media Distribute. For

example:

ServiceMix Version: 4.5.1

MPD Version: 2.0.0.20140618_135830

MPD UI Version: 2.0.0.20140613_141334

13. To verify the ServiceMix installation, do the following:

a. Type the following

ssh Administrator@localhost -p 8101

b. Type the default password

avid

.

c. Type

list

, and press Enter.

All account endpoints display as “Active” and the Social Media Integration route

displays as “Started.”

d. To quit ServiceMix, type

logout

.

Installing Media | Distribute in a Cluster Environment

19

14. To remove the installation files and unmount the USB drive, do the following:

a. Type

cd /

to ensure you are not currently on the USB key by changing to the root

directory.

b. Type the following:

rm -rf [target_directory]

umount /media/usb

c. Remove the USB drive from the server.

Removing Media | Distribute from the Master Node

If you want to remove Media Distribute, you can use the procedure described in this section. If

you need to reinstall Media Distribute, see

“Installing Media | Distribute on the Master Node” on

page 13

.

To remove Media Distribute on the master node:

1. Remove the Media Distribute by typing the following commands:

rpm -e avid-media-central-mpd-2.0.0.[Build]-avid.el6.1.noarch.rpm

rpm -e avid-mpd-2.0.0. [Build]-avid.el6.1.noarch.rpm

rpm -e apache-servicemix-4.5.1-1.el6.avid.noarch.rpm

n

You must remove the Apache ServiceMix RPM file last.

2. To restart the MediaCentral services, type the following commands:

service avid-interplay-central restart

Configuring the Media | Distribute Installation on the Master Node

After you install or upgrade Media Distribute, you must edit several configuration and property

files and restart services on the master cluster node before you can use Media Distribute.

To configure PostgreSQL to allow remote hosts access to the Media Distribute database:

1. Using Linux commands, navigate to the directory containing the PostgreSQL database

configuration file:

cd /var/lib/pgsql/9.1/data

2. Using the Linux text editor, vi, open the pg_hba.conf file for editing:

vi pg_hba.conf

3. Type

G

to go to the last line of the file, and then Type

i

(lower case “i”) to enter insert mode.

Installing Media | Distribute in a Cluster Environment

20

4. Add the following to the last line:

host mpd mpduser 0.0.0.0/0 trust

5. Press the Escape key to return to command mode, then type

:wq

and press Return to write

and quit the text editor.

6. Navigate to the directory containing the Media Distribute database configuration file:

cd /etc/apache-servicemix

7. Using the Linux text editor, vi, open the avid-mpd-wrapper.conf file for editing:

vi avid-mpd-wrapper.conf

8. Locate the following line, and then navigate using the arrow keys and place the cursor on top

of the # (comment indicator):

# set.default.DB_HOST=hostname or IP

9. Type

i

(lower case “i”) to enter insert mode, and then use the arrow keys and backspace to

erase the

#

(comment indicator).

10. Delete the

hostname or IP

value at the end of the line, and then replace it by typing the

virtual cluster IP address — for example,

set.default.DB_HOST=123.45.67.89

11. Press the Escape key to return to command mode, then type

:wq

and press Return to write

and quit the text editor.

To modify the MCS configuration file:

1. Using Linux commands, navigate to the directory containing the MediaCentral

configuration file:

/etc/apache-servicemix

.

2. Using the Linux text editor, vi, open the

com.avid.acs.bus.broker.rabbitmq.RabbitMqBusAccessFactory.cfg file for editing:

vi com.avid.acs.bus.broker.rabbitmq.RabbitMqBusAccessFactory.cfg

3. Navigate using the arrow keys to the line containing the parameter for

brokerConnectURL

.

4. Type

i

(lower case “i”) to enter insert mode, and then type a valid URL for the MediaCentral

connection.

The default value is

amqp://localhost/acs

. Use the virtual cluster IP address as the host

for this configuration file — for example,

amqp://123.45.67.89/acs

5. Press the Escape key to return to command mode, then type

:wq

and press Return to write

and quit the text editor.

6. To restart the Media Distribute service, type the following command:

service avid-mpd clean-restart

Page is loading ...

Avid Media Distribute 2.0 Configuration Guide

Avid Media Distribute 2.0 Configuration Guide

Related papers

Other documents