White Mountain Hearth Boulevard Direct-Vent Linear Decorative Front Glass Barrier Kit Owner's manual

Type
Owner's manual

White Mountain Hearth Boulevard Direct-Vent Linear Decorative Front Glass Barrier Kit

Decorative Front Glass Barrier Kits are used with compatible fireplaces. They are available in black or white painted finish. The front glass barrier is easy to install and is designed to enhance the look of your fireplace. It can be used with any compatible fireplace to improve the safety and aesthetics of the unit. The front glass barrier is made of durable materials that are designed to withstand the heat of the fireplace and provide a clear view of the flames.

White Mountain Hearth Boulevard Direct-Vent Linear Decorative Front Glass Barrier Kit

Decorative Front Glass Barrier Kits are used with compatible fireplaces. They are available in black or white painted finish. The front glass barrier is easy to install and is designed to enhance the look of your fireplace. It can be used with any compatible fireplace to improve the safety and aesthetics of the unit. The front glass barrier is made of durable materials that are designed to withstand the heat of the fireplace and provide a clear view of the flames.

34506-1-0916 Page 1Empire Comfort Systems Inc. • Belleville, Illinois
INSTRUCTIONS MUST BE LEFT WITH THE OWNER AFTER INSTALLATION.
DECORATIVE FRONT GLASS BARRIER KITS
DFQ412BL-1
DFQ414BL-1
DFQ41WBL-1
DFQ41WHP-1
DVQ41WBL & DFQ41WHP
DFQ412BL DFQ414BL
34506-1-0916Page 2 Empire Comfort Systems Inc. • Belleville, Illinois
DFQ412BL DECORATIVE FRONT
BARRIER - INSTALLATION
Noncombustible nishing materials may be
placed up to the Side Stone stops and Clean
Face Hood. This should be completed prior to
installing the DFQ412BL Decorative Front Barrier.
Please refer to “Finishing The Wall” section in
the replace installation manual for detailed
installation information.
1. Carefully unpack the Decorative Front Barrier
assembly.
2. Locate the (2) Side Stone Stops and the Clean Face
Hood.
3. Remove the Glass Door assembly before installing the
stone stops and hood.
4. To install the side stone stops, loosen the top and
bottom Phillips head screws located on the inside
anges of the replace opening. See Figure 1.
Then align the slots in the side stone stops with the
previously loosened screws. Re-tighten the two screws
on each side stone stop to secure.
Figure 1
5. To install the Clean Face Hood, loosen the (7) hex
head screws located across the top opening of the
replace, then align and slide in the Clean Face Hood
and retighten the screws to secure. (See Figure 2)
Figure 2
6. Re-install the glass door assembly.
7. To install the DFQ412BL Decorative Front Barrier kit,
simply line up and engage the four tabs on the barrier
front with the slots in the replace.
NOTE: The top of the barrier frame is to be positioned
under the clean face hood installation Step 5.
(See Figure 3)
Figure 3
9. Installation complete.
ATTENTION
34506-1-0916 Page 3Empire Comfort Systems Inc. • Belleville, Illinois
DFQ414BL, DFQ41WBL, OR
DFQ41WHP DECORATIVE
FRONT BARRIER - INSTALLATION
1. Carefully unpack the Decorative Front Barrier
assembly.
2. To install the Decorative Front Barrier kit, simply line
up and engage the four tabs on the back of the barrier
with the slots in the replace. (See Figures 4 & 5)
Figure 4
Figure 5
3. Installation complete.
34506-1-0916Page 4 Empire Comfort Systems Inc. • Belleville, Illinois
Parts List & View - DFQ41WBL
Index
Number
Part Number Description Quantity
1 Q0017 Screen 1
2 34521 Front Weldment 1
3 34520 Screen Clip 8
4 30777 Hanger Bracket - Left 1
5 30778 Hanger Bracket - Right 1
6 34519 Filler Bracket 2
Parts List & View - DFQ412
4
2
1
3
5
5
6
Index
Number
Part Number Description Quantity
1 Q0017 Screen 1
2 34508 Front Weldment 1
3 34510 Screen Clip 8
4 34511 Heat Deector 1
5 28494 Side Stone Stop 2
6 28493 Clean Face Hood 1
Parts List & View - DFQ414
Index
Number
Part Number Description Quantity
1 Q0017 Screen 1
2 34513 Front Weldment 1
3 34510 Screen Clip 8
Parts List & View - DFQ41WHP
Index
Number
Part Number Description Quantity
1 Q0017 Screen 1
2 34523 Front Weldment 1
3 34520 Screen Clip 8
4 30780 Hanger Bracket - Left 1
5 30781 Hanger Bracket - Right 1
6 34522 Filler Bracket 2
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

White Mountain Hearth Boulevard Direct-Vent Linear Decorative Front Glass Barrier Kit Owner's manual

Type
Owner's manual

White Mountain Hearth Boulevard Direct-Vent Linear Decorative Front Glass Barrier Kit

Decorative Front Glass Barrier Kits are used with compatible fireplaces. They are available in black or white painted finish. The front glass barrier is easy to install and is designed to enhance the look of your fireplace. It can be used with any compatible fireplace to improve the safety and aesthetics of the unit. The front glass barrier is made of durable materials that are designed to withstand the heat of the fireplace and provide a clear view of the flames.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI