Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: [email protected]
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information
from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to
product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of
packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please
contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.
adamhall.com/media/shop/downloads/documents/manufacturersdeclarations.
pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Daimler Straße 9, 61267 Neu Anspach / Email [email protected] /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product, indi-
cates that this appliance may not be treated as household waste. This is to avoid
environmental damage or personal injury due to uncontrolled waste disposal.
Please dispose of this product separately from other waste and have it recycled to
promote sustainable economic activity.
FEATURES
Solid durable construction
Stable heavy duty aluminium diecast base
Lightweight construction
Ergonomic operation Interchangeable colour rings
INTRODUCTION
The SP 5211 B is a classic tripod speaker stand made from thick walled, yet light-
weight powder coated aluminium tubing with a load capacity of 50 kg and 192
cm maximum height.
The die cast aluminium leg collar has been completely redesigned to provide supe-
rior durability and longevity, the height adjustment collar is made of steel for additi-
onal strength and is virtually indestructable. It features a safety pin to securely lock
the 35 mm diameter extension pole in place.
The ergonomic set screw knobs are made from high grade ABS with a so touch,
non-slip thermoplastic coating for comfortable operation.
A set of black coding rings is included with the SP 5211 B, additional ring packs are
available in a wide array of colors for instant personalization.
SPECIFICATIONS
Product type: speaker stand
Tube material: aluminium
Tube colour: black
Tube surface: powder-coated
Min. height: 1060 mm
Max. height: 1920 mm
Transport length: 1050 mm
Height-adjustable: yes
Type of height adjustment: Clamp with safety pin
Material of height adjustment: steel
Base type: Leg joint
Base material: die-cast aluminium
Tube diameter: 35 mm
Max. load: 50 kg
Weight: 2.2 kg
Black ring set included: yes
GSP5211B
Speaker Stand, 35 mm, aluminium
Page is loading ...
-
1
-
2
Gravity SP 5211 B Speaker Stand User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
-
Gravity SF 36 Z 38 M User manual
-
-
-
-
-
-
-
-
-
Other documents
-
Adam Hall SMS11PRO User manual
-
-
LD CURV 500 DB User manual
-
-
LD Systems Curv 500 WMB W User manual
-
-
LD Systems CURV 500 S2 W User manual
-
LD Systems LD System CURV500 Duplex Satellite White Owner's manual
-
-