Paradyne HotWire 8800 DSLAM User manual

Type
User manual

This manual is also suitable for

TM
1
8800-A2-GN10-00
May 1997
Replacement Air Filter for the
HotWire 8800 DSLAM
Installation Instructions
Document Number 8800-A2-GN10-00
May 1997
What is an Air Filter?
The air filter prevents dust from entering the HotWire 8800 Digital Subscriber Line
Access Multiplexer (DSLAM) chassis. Install an air filter when the 8800 chassis is
in a dusty or unfiltered environment. Once the filter is installed, you should
inspect and/or replace the air filter periodically, or whenever the fan alarm is
active.
Installing the Replacement Air Filter
Procedure
To install the replacement air filter:
1. Unfasten the screws on the cover plate and remove it.
2. Remove the old air filter by sliding it out.
3. Slide the replacement air filter into the air filter channel guides.
4. Replace the cover plate and fasten screws.
97-15425
ALARMS
Major MinorFanBA
POWER
MGT
SERIAL
MGT
10BT
ALARM
SLOTS 1 - 6
SLOTS 7-12
SLOTS 13-18
LINES
A
B
-48V (A)
-48V INPUT
-48V (B)
RET (A)
RET (B)
2
4
6
8
10
12
14
16
18
19
1
35
7
9
11
13 15
17
LAN/WAN SLOT
20
LAN/WAN SLOT
Cover Plate
Air Filter
  • Page 1 1

Paradyne HotWire 8800 DSLAM User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI