PRINTED IN UNITED STATES OF AMERICA
WELLS BLOOMFIELD, LLC
2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439
telephone: 775-689-5707
fax: 775-689-5976
www.wellsbloomfield.com
INSTALLATION INSTRUCTIONS
SOLENOID RETROFIT FOR MODEL NUMBERS
8541 8573
9001 9013
600
1. REMOVE EXISTING SOLENOID (See figures 1 and 2)
a. Disconnect brewer from electric power and shut off water
supply.
b. Remove TOP PANEL, FRONT PANEL and SOLENOID
ACCESS DOOR.
c. Disconnect wires to solenoid. Remove silicone SUPPLY
HOSE from solenoid.
d. Remove BRASS NUT from INLET FITTING.
Lift solenoid / timer / bracket assembly from mounting clip.
e. Loosen screws on bottom of solenoid and separate solenoid
from bracket.
Remove solenoid and fittings from cabinet.
CAUTION:
ELECTRIC SHOCK
HAZARD
Unplug brewer before beginning
conversion.
Fig. 1
NOTE: TYPICAL INSTALLATION
SHOWN. ALL INSTALLATIONS ARE
SIMILAR. DETAILS MAY VARY.
Fig. 2
REMOVE SHADED COMPONENTS
* SOLENOID ACCESS DOOR
* SOLENOID AND FLOW CONTROL
* INLET FITTING, TEE & ADAPTERS
p/n 75910 Rev. A ECN-13394
I
600 080211 cps
1 of 3
ACCESS
DOOR
SOLENOID
ASSEMBLY
DISCONNECT
TIMER
BRACKET
SILICONE SUPPLY HOSE
ACCESS DOOR
2. INSTALL NEW SOLENOID (See figs. 3, 4 and 5)
a. Assemble the SOLENOID to the new ACCESS DOOR.
Coil should be at the bottom as shown in fig. B.3.
b. Route the silicone SUPPLY TUBE through the 3rd hole
(from the front). Attach tube to SOLENOID. Push tube
fully onto the outlet of the solenoid coil.
c. Remove "piggy-back" flag from female spade terminal
on existing wiring. Connect jumper wires to the solenoid
and existing white wire as shown.
d. Assemble the ACCESS DOOR / SOLENOID to the
cabinet.
e. Turn water supply ON. Check for leaks.
f. Insert BUTTON PLUG in the hole formerly occupied by the
inlet fitting.
g. Reinstall TOP PANEL and FRONT PANEL.
Reconnect unit to electric power and test for proper operation.
Fig. 5
2 of 3
CAUTION:
ELECTRIC SHOCK
HAZARD
Unplug brewer before beginning
conversion.
Fig. 3
Fig. 4
SOLENOID
JUMPER
WIRES
BROWN
WHITE
WHITE
TO TIMER
TO TIMER
TO TANK
HEATER
LINE
EXISTING
WHITE
WIRES
REMOVE
PIGGY-BACK
PORTION
85089
ACCESS
DOOR
8810-12
BUTTON
PLUG
ROUTE HOSE
AS SHOWN
ATTACH PLASTIC
HOSE TO OUTLET
WITH SOLENOID:
* PUSH HOSE
FULLY AGAINST
VALVE BODY
600 p/n 75910 Instr Retro Solenoid Valve
PARTS LIST: KIT NO. 84571 120V BREWER W/O FAUCET
SERV P/N DESCRIPTION QTY
83612 SOLENOID ASSY, 120V 1
85089 SOLENOID ACCESS DOOR 1
WIRE SET, JUMPER 1
8810-12 BUTTON PLUG, ½“ DIA 1
SCREW, FLT PHL SS 8-32 x ½“ 2
SCREW, PAN SLT SS 4mm x 6mm 2
PARTS LIST: KIT NO. 84574 240V BREWER W/O FAUCET
SERV P/N DESCRIPTION QTY
84569 SOLENOID ASSY, 240V 1
85089 SOLENOID ACCESS DOOR 1
WIRE SET, JUMPER 1
8810-12 BUTTON PLUG, ½“ DIA 1
SCREW, FLT PHL SS 8-32 x ½“ 2
SCREW, PAN SLT SS 4mm x 6mm 2
3 of 3
600 p/n 75910 Instr Retro Solenoid Valve
-
1
-
2
-
3
Bloomfield 9013 User manual
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Bloomfield 9011 User manual
-
-
Bloomfield 8573 User manual
-
-
-
-
Bloomfield 1012 User manual
-
-
-