14 13/16"
27 9/16"
11"
9 1/8"
9/16"
1"
13 1/2"
12 13/16"
7/8"
Threaded inserts (4x)
Routed Area
Threaded inserts (2x)
3/16 -
1/4"
Note: For threaded inserts drill 1/4" diameter holes 3/8" deep
(hardwood may require slightly larger diameter).
SW
THIS DOCUMENT/PUBLICATION/SOFTWARE/DRAWING CONTAINS PROPRIETARY INFORMATION WHICH IS THE PROPERTY OF THE PERLICK CORPORATION. IT MAY NOT BE REPRODUCED OR TRANSMITTED IN ANY FORM, ELECTRONIC
OR MECHANICAL, INCLUDING PHOTOCOPYING, RECORDING, OR USED IN ANYINFORMATION STORAGE, TRANSMISSION, OR RETRIEVAL SYSTEM, WITHOUT WRITTEN PERMISSION FROM THE PERLICK CORPORATION
COPYRIGHT 2001 PERLICK CORPORATION. ALL RIGHTS RESERVED.
Milwaukee, WI 53223
DRAWN
Perlick Corporation
67159
WOOD OVERLAY
NAH
5/29/2009
SCALE
1:8
DATE
ICE MAKER DOOR
/