BASF RG35 B User guide

Brand
BASF
Model
RG35 B
Type
User guide

BASF RG35 B is a technical material designed for use with SLA, LCD, and DLP systems with a working wavelength of 355nm, 385nm, or 405nm. It's compatible with various 3D printers, including the MiiCraft Ultra 125, and offers precise printing with a voxel depth of 75µm. The material requires post-curing to achieve optimal mechanical properties, and detailed instructions for both cleaning and post-curing are provided in the user manual.

BASF RG35 B is a technical material designed for use with SLA, LCD, and DLP systems with a working wavelength of 355nm, 385nm, or 405nm. It's compatible with various 3D printers, including the MiiCraft Ultra 125, and offers precise printing with a voxel depth of 75µm. The material requires post-curing to achieve optimal mechanical properties, and detailed instructions for both cleaning and post-curing are provided in the user manual.

The data contained in this publication are based on our current knowledge and experience. They do not constitute an agreed contractual
quality of the product and, in view of the many factors that may affect processing and application of our products, do not relieve processors
from carrying out their own investigations and tests. The agreed contractual quality of the product at the time of transfer of risk is based
solely on the data in the specification data sheet. Any descriptions, drawings, photographs, data, proportions, weights, etc. given in this
publication may change without prior information. The customer and/or user is responsible to consider and respect all hazard and safety
issues according to the MSDS of Ultracur3D® RG 35 B and take, implement and/or install adequate measures and precautions to avoid any
personal injuries, property damages and/or environmental pollution. Therefore, BASF3D Printing Solutions GmbH shall not be liable for any
personal injury, property damages and/or environmental emissions arising out of or related to the testing, handling or usage, storage and
possession of Ultracur3D® RG 35 B. It is the sole responsibility of the recipient of our product to ensure that any proprietary rights and existing
laws and legislation are observed (02/2020) Version 1.0
BASF 3D Printing Solutions GmbH sales@basf-3dps.com www.forward-am.com
User Guideline
Ultracur3D® RG 35 B
The following User guideline is for professionals who use: Ultracur3D® RG 35 B.
The safety data given in this publication is for information purposes only and does not constitute a
legally binding Material Safety Data Sheet (MSDS). The relevant MSDS can be obtained upon request
from your supplier or you may contact BASF directly at [email protected].
For more information, please refer to the country specific MSDS for advice.
Manufacturer
BASF 3D Printing Solutions GmbH
69115 Heidelberg
GERMANY
E-mail address: [email protected]
http://www.forward-am.com/
Storage Conditions and Disposal Considerations
Keep container tightly closed in a room temperature, well-ventilated place. Keep container dry. If
Material is not being used fill it back through a filter in the corresponding material bottle. The filter
prevents to fill cured pieces or failed prints back into the bottle. Ultracur3D® RG 35 B must be disposed
of or incinerated in accordance with local regulations.
For more information, please refer to the country specific MSDS for advice.
Delivery units
Ultracur3D® RG 35 B is available in the following packaging sizes: 1 kg and 5 kg.
Intended Use
Ultracur3D® RG 35 B is a technical material based on (meth-)acrylate resin for suggested SLA, LCD and
DLP systems. Working wavelength: 355nm, 385 nm or 405 nm. Attached a list of suggest 3D printer
and Printing parameters. For more information contact BASF directly at sales@basf-3dps.com.
The data contained in this publication are based on our current knowledge and experience. They do not constitute an agreed contractual
quality of the product and, in view of the many factors that may affect processing and application of our products, do not relieve processors
from carrying out their own investigations and tests. The agreed contractual quality of the product at the time of transfer of risk is based
solely on the data in the specification data sheet. Any descriptions, drawings, photographs, data, proportions, weights, etc. given in this
publication may change without prior information. The customer and/or user is responsible to consider and respect all hazard and safety
issues according to the MSDS of Ultracur3D® RG 35 B and take, implement and/or install adequate measures and precautions to avoid any
personal injuries, property damages and/or environmental pollution. Therefore, BASF3D Printing Solutions GmbH shall not be liable for any
personal injury, property damages and/or environmental emissions arising out of or related to the testing, handling or usage, storage and
possession of Ultracur3D® RG 35 B. It is the sole responsibility of the recipient of our product to ensure that any proprietary rights and existing
laws and legislation are observed (02/2020) Version 1.0
BASF 3D Printing Solutions GmbH sales@basf-3dps.com www.forward-am.com
Example of Suitable 3D-Printers and Settings
PRINTER
MIICRAFT
ULTRA 125
Wavelength
385 nm
Power
4.5 mW / cm²
Curing time
4.25 s
Voxel depth
75 µm
Printing Process
The material should be processed at room temperature. Before
usage the material should be shaken well. Pour it slowly in the
vat and wait a couple minutes, until smooth, bubble-free surface
is obtained before starting the print job.
As the suitable 3D printer examples and setting parameters
stated above are only for general guidance purpose, user should
always define the optimal settings according to his needs by
himself. Please refer to Instruction of Use or User Guide of the
employed 3D-Printer for the printer settings and handling.
Remove the parts carefully from the build platform with a suite
able tool, for more information see the Instruction for Use of the
used 3D-Printer.
Preparation of Resin
Printing Process
Removing parts
The data contained in this publication are based on our current knowledge and experience. They do not constitute an agreed contractual
quality of the product and, in view of the many factors that may affect processing and application of our products, do not relieve processors
from carrying out their own investigations and tests. The agreed contractual quality of the product at the time of transfer of risk is based
solely on the data in the specification data sheet. Any descriptions, drawings, photographs, data, proportions, weights, etc. given in this
publication may change without prior information. The customer and/or user is responsible to consider and respect all hazard and safety
issues according to the MSDS of Ultracur3D® RG 35 B and take, implement and/or install adequate measures and precautions to avoid any
personal injuries, property damages and/or environmental pollution. Therefore, BASF3D Printing Solutions GmbH shall not be liable for any
personal injury, property damages and/or environmental emissions arising out of or related to the testing, handling or usage, storage and
possession of Ultracur3D® RG 35 B. It is the sole responsibility of the recipient of our product to ensure that any proprietary rights and existing
laws and legislation are observed (02/2020) Version 1.0
BASF 3D Printing Solutions GmbH sales@basf-3dps.com www.forward-am.com
Cleaning and Post curing process
Ultracur3D® RG 35 B can be cleaned with a Glycol Ether based solvent
like Ultracur3D® Cleaner & 2-propanol, please refer to the following
cleaning procedure.
Cleaning with Ultracur3D® Cleaner & 2-propanol
Step 1: Place the parts in a container filled with Ultracur3D® Cleaner
and place this container in an Ultrasonic bath filled with water for 3
minutes.
Step 2: Rinse the parts with 2-propanol for a few seconds. Fine
structures or holes may be better cleaned by using 2-propanol and a
syringe or by separate brushing. Next, place the parts in a container
filled with 2-propanol and place this container in an Ultrasonic bath
filled with water for 3 minutes.
Step 3: Blow dry the parts with pressure air/nitrogen, until the parts
are clean.
Place the parts into a warming cabinet @40°C for 30 minutes.
Cleaning Process
Drying
The data contained in this publication are based on our current knowledge and experience. They do not constitute an agreed contractual
quality of the product and, in view of the many factors that may affect processing and application of our products, do not relieve processors
from carrying out their own investigations and tests. The agreed contractual quality of the product at the time of transfer of risk is based
solely on the data in the specification data sheet. Any descriptions, drawings, photographs, data, proportions, weights, etc. given in this
publication may change without prior information. The customer and/or user is responsible to consider and respect all hazard and safety
issues according to the MSDS of Ultracur3D® RG 35 B and take, implement and/or install adequate measures and precautions to avoid any
personal injuries, property damages and/or environmental pollution. Therefore, BASF3D Printing Solutions GmbH shall not be liable for any
personal injury, property damages and/or environmental emissions arising out of or related to the testing, handling or usage, storage and
possession of Ultracur3D® RG 35 B. It is the sole responsibility of the recipient of our product to ensure that any proprietary rights and existing
laws and legislation are observed (02/2020) Version 1.0
BASF 3D Printing Solutions GmbH sales@basf-3dps.com www.forward-am.com
Ultracur3D® RG 35 B parts require adequate post curing to achieve
the optimized final mechanical properties. After each post-curing
cycle, the part needs to be flipped to achieve an even curing.
Examples of post curing procedures
MiiCraft Ultra 125
Post-curing unit
Dymax ECE 2000 flood
Amount of cycles
2
Duration of one
curing cycle
600 seconds
Remove, if necessary, support structures and smoothing the surface.
These proceedings are only general guidelines, the optimal printing settings as well as curing time must
be defined by the user himself. The post-curing might differ by using different 3D-Printers and different
post-curing units may require different settings.
Post curing
Finishing Process
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

BASF RG35 B User guide

Brand
BASF
Model
RG35 B
Type
User guide

BASF RG35 B is a technical material designed for use with SLA, LCD, and DLP systems with a working wavelength of 355nm, 385nm, or 405nm. It's compatible with various 3D printers, including the MiiCraft Ultra 125, and offers precise printing with a voxel depth of 75µm. The material requires post-curing to achieve optimal mechanical properties, and detailed instructions for both cleaning and post-curing are provided in the user manual.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents