Page is loading ...
Model ID: STRIKE1
Contents
1 STRIKE 1 LED Blinder
2 LIMITED WARRANTY
3 Multi-Bracket Overview
4 Product Mounting
Diagram
5 DMX Values
6 Documents / Resources
7 Related Posts
STRIKE 1 LED Blinder
About This Guide
The STRIKE 1 Quick Reference Guide (QRG) has basic product information such as connection, mounting, menu
options, and DMX values. Download the User Manual from www.chauvetprofessional.com for more details.
Disclaimer
The information and specifications contained in this QRG are subject to change without notice.
LIMITED WARRANTY
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR
WEBSITE.
For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and
Germany: www.chauvetlighting.eu/warranty-registration.
Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for
the period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our
website. This warranty extends only to the original purchaser of the product and is not transferable. To exercise
rights under this warranty, you must provide proof of purchase in the form of an original sales receipt from an
authorized dealer that shows the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR
IMPLIED WARRANTIES. This warranty gives you specific legal rights. You may also have other rights that vary
from state to state and country to country. This warranty is valid only in the United States, United Kingdom,
Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, Germany and Mexico. For warranty terms in
other countries, please consult your local distributor.
Safety Notes
DO NOT open this product. It contains no user-serviceable parts.
The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 7.6 ft
(2.3 m) is not expected.
If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord
exclusively available from the manufacturer or his service agent.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a
similar qualified person.
The luminaire is intended for professional use only.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
DO NOT look at the light source when the product is on.
CAUTION: Flashing light is known to trigger epileptic seizures. User must comply with local laws regarding
notification of strobe use.
CAUTION: This product’s housing may be hot when lights are operating.
Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
DO NOT leave any flammable material within 7.9 in (0.2 m) to all exterior surfaces of the luminaire.
CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm humid
ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow
product to fully acclimate to the surrounding environment before connecting it to power.
USE a safety cable when mounting this product overhead.
DO NOT submerge this product (IP65). Regular outdoor operation is fine.
DO NOT operate this product if the housing, lenses, or cables appear damaged.
DO NOT connect this product to a dimmer or rheostat.
ONLY connect this product to a grounded and protected circuit.
ONLY use the hanging/mounting bracket to carry this product.
In the event of a serious operating problem, stop using immediately.
The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
Contact
Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support
or return a product. Refer to Contact Us at the end of this QRG for contact information.
What is Included
STRIKE 1
Seetronic Powerkon IP65 power cord
Multi-Bracket
Quick Reference Guide
AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60
Hz.
Power Linking
You can link up to 6 STRIKE 1 products at 120 VAC, 10 at 208 VAC, or 11 products at 230 VAC. Never exceed
this number. Power linking cords can be purchased separately.
AC Plug
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow/Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect
the product from power via breaker or by unplugging it.
DMX Linking
The STRIKE 1 will work with a DMX controller using a 5-pin DMX serial connection. A DMX Primer is available
from www.chauvetprofessional.com.
DMX Connection
The STRIKE 1 uses a 5-pin DMX data connection for its DMX personalities: 1 Ch, 3 Ch, 4 Ch, 5 Ch, and 6 Ch.
See the User Manual for information about connecting and configuring the product for DMX operation.
Master/Slave Connection
The STRIKE 1 uses the DMX data connection for its Master/Slave mode. See the User Manual for information
about how to connect and configure the product for master/slave operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-
directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer as not
all DMX controllers have this capability. The STRIKE 1 supports RDM protocol that allows feedback to make
changes to menu map options.
Download the User Manual from www.chauvetprofessional.com for more details.
Mounting
Before mounting this product, read the Safety Notes.
STRIKE 1 Multi-Bracket
The STRIKE 1 Multi-Bracket allows the creation of multi-fixture banks with ease. Link up to 4 products vertically
from any mounting point. The included spacer bar maintains horizontal pixel pitch. Make sure the mounting
clamps are capable of supporting the combined weight of the products. For our CHAUVET Professional line of
mounting clamps, go to http://trusst.com/products.
Multi-Bracket Overview
Multi-Bracket Spacer-bar
(maintains horizontal pixel pitch)
Spacer
(stabilizes brackets)
Product Mounting Diagram
Secure all safety cables to the mounting surface, NOT the multi-bracket.
Do not mount more than 4 products vertically from one mounting point.
Ensure any mounting surface you plan to use is capable of supporting the weight of all products being
mounted.
Control Panel Description
Button Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected fu
nction
<UP> Navigates upwards through the menu list or increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list or decreases the numeric value when in a functi
on
Menu Map
Main Level Programming Levels Description
DMX Address Address <001-512> Selects DMX address (highest channel restricted to person
ality chosen)
DMX Channel
1 Ch 1-channel: dimmer
3 Ch 3-channel: dimmer, red shift, dimmer speed
4 Ch 4-channel: 16-bit dimmer, red shift, dimmer speed
5 Ch 5-channel: dimmer, red shift, strobe, auto, dimmer speed
6 Ch 6-channel: 16-bit dimmer, red shift, strobe, auto, dimmer sp
eed
Static
Dimmer
<0-255>
Sets the intensity of the light output
Strobe Selects the strobe frequency
Auto Show Auto 1-3 <001-100> Automatic programs
Red Shift
On Turns on or off Red Shift (Amber LEDs imitate lamp when d
imming
Off
Master/Slave
Mode
Master Master mode
Slave DMX mode (Slave mode)
Dimmer Mode
Off No dimmer curve
Dimmer 1–3 Dimming curves Dimmer 1 (fast) to Dimmer 3 (slow)
Main Level Programming Levels Description
LED Frequenc
y
600Hz
PWM frequency
1200Hz
2000Hz
4000Hz
25KHz
Fan Mode
Auto
Fan Control
On
Back Light
On Display backlight always on
10S Turns off display backlight after 10 seconds of inactivity
20S Turns off display backlight after 20 seconds of inactivity
30S Turns off display backlight after 30 seconds of inactivity
Key Lock
On Locks display (password is <UP>, <DOWN>, <UP>, <DO
WN>, <ENTER>)
Off
Information
Fixture Hours Shows total product hours
Version Shows installed software version
UID Shows product ID
Reset Factory
No
Reset to factory defaults
Yes
DMX Values
6 Ch
Channel Function Value Percent/Setting
1 Dimmer 000 ⇔ 255 0-100%
2 Fine Dimmer 000 ⇔ 255 0-100%
3 Red Shift 000
001 ⇔ 255
On
Off
4 Strobe 000 ⇔ 010
011⇔ 255
No function
Strobe, slow to fast
5 Auto Program
000 ⇔ 010
011 ⇔ 080
081 ⇔ 160
161 ⇔ 240
241 ⇔ 255
No function
Auto 1, slow to fast
Auto 2, slow to fast
Auto 3, slow to fast
No function
6 Dimmer Speed*
000 ⇔ 051
052 ⇔ 101
102 ⇔ 152
153 ⇔ 203
204 ⇔ 255
Current dimmer speed mode
Dimmer speed mode off (linear dimmer)
Dimmer speed mode 1 (fastest)
Dimmer speed mode 2
Dimmer speed mode 3 (slowest)
5 Ch
Channel Function Value Percent/Setting
1 Dimmer 000 ⇔255 0-100%
2 Red Shift 000
001 ⇔ 255
On
Off
3 Strobe 000 ⇔ 010
011 ⇔ 255
No function
Strobe, slow to fast
4 Auto Program
000 ⇔ 010
011 ⇔ 080
081 ⇔ 160
161 ⇔ 240
241 ⇔ 255
No function
Auto 1, slow to fast
Auto 2, slow to fast
Auto 3, slow to fast
No function
5 Dimmer Speed*
000 ⇔ 051
052 ⇔ 101
102 ⇔ 152
153 ⇔ 203
204 ⇔ 255
Current dimmer speed mode
Dimmer speed mode off (linear dimmer)
Dimmer speed mode 1 (fastest)
Dimmer speed mode 2
Dimmer speed mode 3 (slowest)
*Hold desired dimmer speed value for 3 seconds, then release. This changes the dimmer speed setting in
the menu.
4 Ch
Channel Function Value Percent/Setting
1 Dimmer 000 ⇔ 255 0-100%
2 Fine Dimmer 000 ⇔ 255 0-100%
3 Red Shift 000
001 ⇔ 255
On
Off
4 Dimmer Speed*
000 ⇔ 051
052 ⇔ 101
102 ⇔ 152
153 ⇔ 203
204 ⇔ 255
Current dimmer speed mode
Dimmer speed mode off (linear dimmer)
Dimmer speed mode 1 (fastest)
Dimmer speed mode 2
Dimmer speed mode 3 (slowest)
3 Ch
Channel Function Value Percent/Setting
1 Dimmer 000 ⇔ 255 0-100%
2 Red Shift 000
001 ⇔ 255
On
Off
Channel Function Value Percent/Setting
3 Dimmer Speed*
000 ⇔ 051 Current dimmer speed mode
052 ⇔ 101 Dimmer speed mode off (linear dimmer)
102 ⇔ 152 Dimmer speed mode 1 (fastest)
153 ⇔ 203 Dimmer speed mode 2
204 ⇔ 255 Dimmer speed mode 3 (slowest)
*Hold desired Dimmer Speed value for 3 seconds, then release. This changes the Dimmer Speed setting in
the menu.
1 Ch
Channel Function Value Percent/Setting
1 Dimmer 000 ⇔ 255 0-100%
Contact Us
General Information Technical Support
Chauvet World Headquarters
Address: 5200 NW 108th Ave.
Sunrise, FL 33351
Voice: (954) 577-4455
Fax: (954) 929-5560
Toll Free: (800) 762-1084
Voice: (844) 393-7575
Fax: (954) 756-8015
Email: chauvetcs@chauvetlighting.com
Website: www.chauvetprofessional.com
Chauvet Europe Ltd.
Address: Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: +44 (0) 1773 511115
Fax: +44 (0) 1773 511110
Email: UKtech@chauvetlighting.eu
Website: www.chauvetprofessional.eu
Chauvet Europe BVBA
Address: Stokstraat 18
9770 Kruishoutem
Belgium
Voice: +32 9 388 93 97
Email: BNLtech@chauvetlighting.eu
Website: www.chauvetprofessional.eu
Chauvet France
Address: 3, Rue Ampère
91380 Chilly-Mazarin
France
Voice: +33 1 78 85 33 59
Email: FRtech@chauvetlighting.fr
Website: www.chauvetprofessional.eu
Chauvet Germany
Address: Bruno-Bürgel-Str. 11
28759 Bremen
Germany
Voice: +49 421 62 60 20
Email: DEtech@chauvetlighting.de
Website: www.chauvetprofessional.eu
Chauvet Mexico
Address: Av. de las Partidas 34 – 3B
(Entrance by Calle 2)
Zona Industrial Lerma
Lerma, Edo. de México, CP 52000
Voice: +52 (728) 690-2010
Email: servicio@chauvet.com.mx
Website: www.chauvetprofessional.mx
Visit the applicable website above to verify our contact information and instructions to request support. Outside
the U.S., U.K., Ireland, Mexico, France, Germany, or Benelux, contact the dealer of record.
STRIKE 1 QRG Rev. 7
Documents / Resources
CHAUVET PROFESSIONAL STRIKE 1 LED Blinder [pdf] User Guide
STRIKE 1 LED Blinder, STRIKE 1, LED Blinder, LED, Blinder
Manuals+,
/