Marvel MPDR424 is an integrated panel refrigerator that seamlessly blends into your cabinetry, offering a sleek and customized look for your kitchen. Its adjustable temperature control allows you to set the ideal temperature for your food and drinks. With its spacious interior, you can easily store all your favorite groceries, snacks, and beverages. The unit also features an LED lighting system that brightly illuminates the interior, making it easy to find what you're looking for.
Marvel MPDR424 is an integrated panel refrigerator that seamlessly blends into your cabinetry, offering a sleek and customized look for your kitchen. Its adjustable temperature control allows you to set the ideal temperature for your food and drinks. With its spacious interior, you can easily store all your favorite groceries, snacks, and beverages. The unit also features an LED lighting system that brightly illuminates the interior, making it easy to find what you're looking for.
OWNERS GUIDE
MARVEL PROFESSIONAL UNDERCOUNTER REFRIGERATION
THE ORIGINAL REFRIGERATION EXPERTS SINCE 1892
FOR MODEL # MPBV415
OWNER’S GUIDE
MARVEL PROFESSIONAL UNDERCOUNTER REFRIGERATION
THE ORIGINAL REFRIGERATION EXPERTS SINCE 1892
FOR MODEL # MPDR424
WELCOME
Welcome to the Marvel Experience
Thank you for choosing our quality American-built product
to add to your home. We are thrilled to welcome you to
our growing community of Marvel owners, who trust in our
products and our support.
The information in this guide is intended to help you install
and maintain your new Marvel undercounter model to pro-
tect and prolong its lifetime. We encourage you to contact
our Technical Support team at (616) 754-5601 with any
questions.
Got a Marvelous Design?
We would love to see how your Marvel product looks in its
new home. Send us photos at marketing@marvelrefriger-
ation.com, and we might feature your Marvel home design
on our website and social media!
Bonus Third-Year Warranty Free with Product
Registration
Your Marvel Professional product
qualies for a one-year extension
of the two-year warranty coverage
from your date of purchase, free of
charge. To take advantage of this
third-year warranty, be sure to reg-
ister your product with Marvel within
60 days from the date of purchase at
marvelrefrigeration.com and provide
proof of purchase.
Thank you again for investing in Marvel for your home!
Warranty Registration
It is important you send in your warranty registration card
immediately after taking delivery of your appliance or you
can register online at www.marvelrefrigeration.com.
The following information will be
required when registering your
appliance:
Service Number
Serial Number
Date of Purchase
Dealer’s name and address
The service number and serial number can be found on the
serial plate which is located inside the cabinet on the left
side near the top.
Online regis-
tration available at
www.marvelrefriger-
ation.com
XXXXXXXXXXXX
XXXXXXXXXXXX
MARVEL
g
R600A
1429⁄32"
(379 mm)
23⁄8"
(60 mm)
Panel
thickness
Figure 17
19"
(483 mm)
13⁄16"
(30 mm)
1"(25 mm) diameter counter
bore 1⁄4" (6 mm) deep
2 places, top drawer only.
117⁄8"
(302 mm)
11⁄32"
(8.8 mm)
1⁄2" (12.7 mm)
diameter, top
drawer only
13⁄16" (21 mm)
counterbore
7⁄16" (12 mm)
deep, top
drawer only
This side
facing interior
233⁄4"
(603 mm)
INTEGRATED PANEL DIMENSIONS
4
INTEGRATED PANEL INSTALLATION
Full Integrated Panel Installation Instructions
Determine Wood Screw Requirements
1. A #10 pan head wood screw should be used to proper-
ly secure the integrated panel. A quantity of 16 screws
are supplied with the unit in the literature pack.
2. Use only pan head screws.
3. If your integrated panel is thinner than 5⁄8" (15.9 mm)
you will need to purchase shorter screws. The longer
screws will break through the front of the panel.
Figure 18
• Never attempt to repair or perform maintenance on
the appliance until the main electrical power has been
disconnected. Turning the appliance control "OFF"
does not remove electrical power from the units wiring.
• Replace all parts and panels before operating.
!WARNING
Electrocution Hazard
!CAUTION
It is important to use the factory provided grille that came
with the product to assure proper air ow is maintained
through the condenser. The use of a custom grille is not
recommended and will void the warranty.
5
Cut the integrated panel to the dimensions shown below in
Figure 21. On the top drawer only, drill the 2 counter-bored
holes which are clearance for screw heads on the face of
the top drawer and the lock hole at the bottom of the top
drawer only.
This is also a convenient time to locate and drill the holes
for your handle. Most often the handle is to match that of
the surrounding cabinetry. If your handle attaches from the
back-side of the custom panel, locate the mounting holes
while the panel is attached to the drawer and cabinet. After
the panel is removed from the drawer, drill the mounting
holes from the front, to the recommended diameter of the
handle manufacturer. Counter bore the back-side of the
panel so the screw heads do not interfere with the surface
of the drawer.
Step 2: Size the Integrated Panel
Figure 22
.35/.31
(9 mm/7.5 mm)
.50
(12.5)
Figure 20
Remove screws
Clips
Gasket
Figure 21
Step 1: Remove Drawers from unit.
1. Begin by pulling out the top drawer. (See Figure 14).
Remove screws securing drawer to slides (See Figure
15). Pull drawer forward, lift up and out to clear clips in
rear of drawer. Move drawer forward about 1" (2.5 cm)
and set down on slides. At the right rear corner of the
drawer disconnect the display wire harness (See Figure
14a). Remove the drawer from the unit by lifting up o
of the slides. Repeat for bottom drawer but disregard
the harness instructions as there is no wiring to the bot-
tom drawer.
2. Remove the drawer divider from the drawer and
remove the gasket from the drawer front. (See Figure
13). Do this by pulling the gasket out of the channel
that holds it to the drawer front. This will expose the
clearance holes for mounting the integrated panel.
(See Figure 17).
INTEGRATED PANEL INSTALLATION
6
Step 3: Attach the Integrated Panel to the
Drawer
1. Set the integrated panel on drawer front face and align
edges. (See Figure 17). The custom integrated panel
should be ush with the top of the drawer and centered
on the width of the drawer. Clamp panel in position and
mark pilot hole locations. Pick the required pilot hole
size from "Table A" below and drill the pilot holes ensur-
ing not to drill all the way through the integrated panel.
Table A: Pilot Hole Drill Sizes for Wood Screws
Material Type #8 Wood Screw
Hardwood 1⁄8 Diameter Pilot Hole
Softwood 7⁄64 Diameter Pilot Hole
2. Insert wood screws through clearance holes and
tighten to secure integrated panel.
3. Reinstall gasket into channel. Make sure the corners
are fully inserted.
4. Place the drawer divider back into the drawer.
Figure 23
Integrated panel
ush with top
edge of drawer
Using clearance holes in
gasket channel mark
hole locations onto panel
Screw clearance
hole through
gasket extrusion
Figure 23a
Custom integrated
panel to be cen-
tered on width of
drawer.
INTEGRATED PANEL INSTALLATION
7
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Marvel MPDR424 is an integrated panel refrigerator that seamlessly blends into your cabinetry, offering a sleek and customized look for your kitchen. Its adjustable temperature control allows you to set the ideal temperature for your food and drinks. With its spacious interior, you can easily store all your favorite groceries, snacks, and beverages. The unit also features an LED lighting system that brightly illuminates the interior, making it easy to find what you're looking for.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Marvel undefined User manual
-
Marvel undefined User manual
-
-
Marvel ML24RDS3NB User guide
-
-
Marvel MP24RDP3NP User guide
-
-
Marvel MP24WSG0LS User guide
-
-
Marvel 25OiM-SS-F-R User guide