2. star-m
  3. star-m MCS10 Melody Speaker

star-m star-m MCS10 Melody Speaker, MCS10 Melody Speaker Installation guide

  • I have reviewed the user manual for the MCS10 melody speaker and I'm ready to answer your questions about this device. This document provides step-by-step instructions for safely installing and removing the speaker, including important safety precautions.
  • What should I do before installing the melody speaker?
    Where do I plug the cable of the melody speaker?
    After connecting the melody speaker how to end installation?
Be sure to perform the "installation" or "removal" operation of
this product correctly according to the procedure described
in this manual. If you follow dierent procedures, the product
may be damaged.
Please read this manual before installing / removing the product.
2. Plug the cable of this product into the external device drive connector on the back of
the printer until you hear a click.
Removal procedure
1. Before installing, turn off the printer and unplug the power cable from the AC outlet.
Please make sure to wait 30 seconds before proceeding to step 2. to perform the
removal work.
2.Unplug the cable of this product from the external device drive connector on the back
of the printer.
3. Connect the cables to suit the location where the device is placed. Plug the power cable
to the AC outlet. Turn on the printer. Installation is complete.
Installation procedure
1.Before installing, turn off the printer ( ) and unplug the power cable from the AC
outlet ( ).
Please make sure to wait 30 seconds before proceeding to step 2. to
perform the installation work.
RESET
DC
24V
LAN
Cash Drawer
/Buzzer
0.5A
2.4A 0.5A
iPad
Cash Drawer
/Buzzer
1
2
Press and hold the power button to turn o the power.
Check that the Power LED is o.
Unplug the power cable from the
AC outlet.
1
2
©
2021 Star Micronics Co.,Ltd.
Precautions for installing the melody speaker MCS10
/