star-m MCS10 Melody Speaker Installation guide

Brand
star-m
Model
MCS10 Melody Speaker
Type
Installation guide

This manual is also suitable for

Be sure to perform the "installation" or "removal" operation of
this product correctly according to the procedure described
in this manual. If you follow dierent procedures, the product
may be damaged.
Please read this manual before installing / removing the product.
2. Plug the cable of this product into the external device drive connector on the back of
the printer until you hear a click.
Removal procedure
1. Before installing, turn off the printer and unplug the power cable from the AC outlet.
Please make sure to wait 30 seconds before proceeding to step 2. to perform the
removal work.
2.Unplug the cable of this product from the external device drive connector on the back
of the printer.
3. Connect the cables to suit the location where the device is placed. Plug the power cable
to the AC outlet. Turn on the printer. Installation is complete.
Installation procedure
1.Before installing, turn off the printer ( ) and unplug the power cable from the AC
outlet ( ).
Please make sure to wait 30 seconds before proceeding to step 2. to
perform the installation work.
RESET
DC
24V
LAN
Cash Drawer
/Buzzer
0.5A
2.4A 0.5A
iPad
Cash Drawer
/Buzzer
1
2
Press and hold the power button to turn o the power.
Check that the Power LED is o.
Unplug the power cable from the
AC outlet.
1
2
©
2021 Star Micronics Co.,Ltd.
Precautions for installing the melody speaker MCS10
  • Page 1 1

star-m MCS10 Melody Speaker Installation guide

Brand
star-m
Model
MCS10 Melody Speaker
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents