Chauvet Professional Amhaze Reference guide

Amhaze
Chauvet Professional
Brand
Chauvet Professional
Model
Amhaze
Category
Stroboscopes & disco lights
Type
Reference guide

This manual is also suitable for

Chauvet Professional Amhaze is a compact and versatile haze machine designed to create a professional haze effect for a variety of applications, including live events, concerts, and theatrical productions. With its adjustable haze output and fan speed, the Amhaze can produce a wide range of effects, from a light mist to a thick, dense fog. It features a 1-liter fluid tank, which provides up to 10 hours of continuous operation, and a quick warm-up time of just 2 minutes. The Amhaze can be controlled via DMX or manually using the control panel on the back of the unit.

Chauvet Professional Amhaze is a compact and versatile haze machine designed to create a professional haze effect for a variety of applications, including live events, concerts, and theatrical productions. With its adjustable haze output and fan speed, the Amhaze can produce a wide range of effects, from a light mist to a thick, dense fog. It features a 1-liter fluid tank, which provides up to 10 hours of continuous operation, and a quick warm-up time of just 2 minutes. The Amhaze can be controlled via DMX or manually using the control panel on the back of the unit.

Page is loading ...
Amhaze™ Studio QRG EN
2
About This
Guide
The Amhaze™ Studio Quick Reference Guide (QRG) has basic product
information such as connection, mounting, menu options, and DMX values.
Download the User Manual from www.chauvetprofessional.com for more details.
Disclaimer
The information and specifications contained in this QRG are subject to change
without notice.
Safety Notes
• Depending on the amount of haze generated, all haze machines may set off
smoke detectors.
• Drain the tank before transporting the product.
• This product is not intended for permanent installation.
• This product is for indoor use only! (IP20) To prevent risk of fire or shock, do
not expose this product to rain or moisture.
• Always disconnect from power before cleaning or replacing the fuse.
• Replace the fuse with the same type and rating.
• Do not operate this product if the housing, fluid tank, or cables appear
damaged.
• In the event of a serious operating problem, stop using immediately.
• DO NOT open this product. It contains no user-serviceable parts.
• Do not use for space heating purposes.
• Never disconnect this product from power by pulling on the cord.
• Mount this product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
• USE a safety cable when mounting this product overhead.
• Do not touch the output nozzle on this product. It is very hot during operation
and it may remain hot for several hours after turning the product off.
• Do not leave any flammable material within 50 cm of this product while
operating or connected to power.
• Only use CHAUVET® (PHF or HFG) haze fluid.
• Do not add anything to the haze liquid.
• Do not drink the haze liquid.
• Do not allow the haze liquid to touch your skin or eyes.
• Do not connect this product to a dimmer or rheostat.
• Only connect this product to a grounded and protected circuit.
• Only use the handles to carry this product.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate this
product at higher temperatures.
• To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the product from power via breaker or by
unplugging it.
• CAUTION: When transferring product from extreme temperature
environments, (e.g. cold truck to warm humid ballroom) condensation may
form on the internal electronics of the product. To avoid causing a failure,
allow product to fully acclimate to the surrounding environment before
connecting it to power.
Amhaze™ Studio QRG EN
3
Contact
• From outside the U.S., UK, Ireland, or Mexico, contact the distributor of
record to request support or return a product.
• From inside the U.S., UK, Ireland, or Mexico, use the information in
Contact Us at the end of this QRG.
What Is
Included
• Amhaze™ Studio
• Neutrik® powerCON®
power cord
• Warranty Card
• Quick Reference Guide
AC Power
This product has a fixed voltage power supply and it can work with an input
voltage of either 120 VAC, 60 Hz or 230 VAC, 50 Hz, depending on the specific
model.
AC Plug
Connection
Wire (U.S.)
Screw Color
AC Live
Black
Yellow/Brass
AC Neutral
White
Silver
AC Ground
Green/Yellow
Green
To eliminate unnecessary wear and improve its lifespan, during periods of
non-
use completely disconnect the product from power via breaker or by
unplugging it.
Replacing The Fuse
1. Disconnect this product from power.
2. Using a Phillips #2 head screwdriver, unscrew the fuse holder cap from the
housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The Amhaze™ Studio will work with a DMX controller using a 3- or 5-pin DMX
serial connection. A DMX Primer is available from
www.chauvetprofessional.com.
DMX Connection
The Amhaze™ Studio uses a 3- or 5-pin DMX data connection for its 2-channel
DMX personality. See the User Manual for information about connecting
and
configuring the product for DMX operation.
Preparing for
Operation
To prepare the Amhaze™ Studio for operation:
1. Open the flight case.
2. Pull out the fluid tank and remove the cap.
3. Verify that the two plastic hoses attached to the cap are in place and in good
condition.
4. Pour CHAUVET® (PHF or HFG) haze fluid inside the tank, and re-cap.
5. Reinsert the tank.
6.
Make sure that the plastic hose that goes from the cap to the hazer is not bent.
7. Plug in power and wait approx. 2 min. for warm-up to complete.
Fluid Tank Indicator
Lights
Three internal indicator LEDs show the status of the fluid tank, as follows.
• Red - the fluid tank is currently heating up
• Blue - the fluid tank is ready
• Flashing Red/Blue - the fluid tank is actively re-heating while producing
output.
Only use CHAUVET® approved (PHF or HFG) haze fluid. Otherwise, you
might not have satisfactory results. In addition, unapproved fluid can damage
the Amhaze™ Studio or cause harm to humans or animals.
Amhaze™ Studio QRG EN
4
Mounting
Before mounting this product, read the Safety Notes. Use two mounting points per
product. Make sure the mounting clamps
are capable of supporting the weight of
the product. For our Chauvet line of mounting clamps, g
o to
www.trusst.com/productcategory/accessories-clamps/.
Product
Mounting
Diagram
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<UP>
Navigates upwards through the menu list or increases the
numeric value when in a function
<DOWN>
Navigates downwards through the menu list or decreases
the numeric value when in a function
Overhead/Floor
Mounting
Mounting Clamp
Safety Cable
Rubber Feet (x4)
for floor mounting
Threaded
Mounting Hole
Size M13
Amhaze™ Studio QRG EN
5
Menu Map
Main Level
Programming Levels
Description
d
001–512
Selects the DMX starting address
F
000–005
Fan speed control
h
Haze volume control
DMX Values
2Ch
Channel
Function
Value
Percent/Setting
1 Fan Speed
000005
006255
No function
Fan speed (slow to fast)
2 Haze Volume
000005
006
255
No function
Haze volume 1-100%
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Amhaze™ Studio QRG Multi-Language
Amhaze™ Studio QRG, Rev. 1 ML│ © Copyright 2014 Chauvet │All rights reserved. Printed in P. R. C.
Contact Us
WORLD HEADQUARTERS - Chauvet
General Information
Address:5200 NW 108th Avenue
Sunrise, FL 33351
Voice: (954) 577-4455
Fax: (954) 929-5560
Toll free:(800) 762-1084
Technical Support
Voice: (954) 577-4455 (Press 4)
Fax: (954) 756-8015
Email: tech@chauvetlighting.com
World Wide Web
www.chauvetlighting.com
UNITED KINGDOM AND IRELAND - Chauvet Europe Ltd.
General Information
Address:Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: +44 (0)1773 511115
Fax: +44 (0)1773 511110
Technical Support
Email: uktech@chauvetlighting.com
World Wide Web
www.chauvetlighting.co.uk
MEXICO - Chauvet Mexico
General Information
Address:Av. Santa Ana 30
Parque Industrial Lerma
Lerma, Mexico C.P. 52000
Voice: +52 (728) 285-5000
Technical Support
Email: servicio@chauvet.com.mx
World Wide Web www.chauvet.com.mx
Outside the U.S., United Kingdom, Ireland, or Mexico, contact the dealer of record.
Follow their instructions to request support or to return a product. Visit our website
for contact details.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Chauvet Professional Amhaze Reference guide

Amhaze
Chauvet Professional
Brand
Chauvet Professional
Model
Amhaze
Category
Stroboscopes & disco lights
Type
Reference guide
This manual is also suitable for

Chauvet Professional Amhaze is a compact and versatile haze machine designed to create a professional haze effect for a variety of applications, including live events, concerts, and theatrical productions. With its adjustable haze output and fan speed, the Amhaze can produce a wide range of effects, from a light mist to a thick, dense fog. It features a 1-liter fluid tank, which provides up to 10 hours of continuous operation, and a quick warm-up time of just 2 minutes. The Amhaze can be controlled via DMX or manually using the control panel on the back of the unit.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents