2. La Crosse Technology
  3. Max X'treme K3-100

La Crosse Technology Max X'treme K3-100 User manual

  • Hello! I am an AI chatbot trained to assist you with the La Crosse Technology Max X'treme K3-100 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
K3-100
Max X’treme
Instruction Manual
K3-100
K3-100
K3-100
K3-100
K3-100
K3-100
K3-100
K3-100
K3-100
K3-100
K3-100
K3-100
temperature, barometer, altitude.)
pacer in a sleek water resistant case.
Store your La Crosse Technology K3-100 wrist watch in a dry
place when not in use
Mode Button
Select Button
and Current
Time Mode
[Select]
[Select]
[Select]
[Mode]
[Mode] [Mode]
[Mode]
[Mode][Mode]
Select
4.1
4.2
[Mode]
[Mode] [Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[Mode]
[mode]
[mode]
K3-100
[ MODE ]
[ MODE ]
[ MODE ]
[ MODE ]
[ MODE ]
[ MODE ]
[ MODE ]
[ MODE ]
5
K3-100
K3-100
K3-100
6
1, 3, 5, 10, 15 and 45 Minutes.
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
The pacer will generate beeps at a pre-defined beeping rate. The beeping rate can be set
from 30 to 180 beats per minute(BPM) in step of 5.
USING THE PACER
In current time mode, press [M] until PACER is displayed.
Press the [S/S] button to start the pacer.
The step counter “St” will run in the middle of the display (max 99999steps)
Press the [S/S] button to stop the pacer.
To reset the step counter, press and hold the [L/R] button when the pacer was stopped.
HOW TO SET THE BEEPING RATE
Press and hold the [M] button for 2 seconds in Pacer Mode.
When the beeping rate digits start to flash, press the [S/S] or [L/R] button to increase/
decrease the number. (Hold down the button to change the number at a higher speed).
When the setting is completed, press and hold the [M] button to exit the setting display.
9.0
10.0
[ Mode ] [ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
five (5)
[Select] button twice to enter the Barometer mode.
K3-100
three(3)
, Sea Level Pressure and History.
[Mode]
[Mode] [Mode]
K3-100
[ Mode ]
[ Mode ]
10.1
10.2
10.3
11.0
K3-100
K3-100
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Select ]
[ Select ]
one to
K3-100
11.1
11.2
11.3
[ Mode ]
[ Mode ]
[ Mode ] [ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
K3-100
K3-100
K3-100
[ Mode ]
[ Mode ]
[ Mode ]
K3-100
[ Mode ]
[ Mode ]
[ Mode ]
[ Mode ]
11.4
[Mode]
[Mode]
[ Mode ]
[ Mode ]
[ Mode ]
11.5
[ Mode ]
[ Mode ]
[ Mode ]
[Mode]
[Mode]
[ Mode ]
K3-100
K3-100
6 Quick-Set-Values
(1, 3, 5, 10, 15, and 45 minutes)
-702m to 9164m
(-2306ft to 30065ft) Assuming sea
300 hPa/mbar to 1100hPa/mbar
(8.85 inHg to 32.48 inHg)
Up to 10m (30 feet)
5 seconds EL backlight operation per day
/