Haier KXT7020BK User manual

Brand: Haier

Model: KXT7020BK

Category: Portable TVs

Type: User manual

Instruction Manual

Portable 7" COLOR TFT LCD TELEVISION SET

AV/TV

POWER

MUTE

CH+

TUNE

VOL+VOL-

CH-

PIC SETUP

Dear Customers:

Thank you for purchasing this product.

Please read this manual carefully before connecting, operating or

 adjusting this product in order to ensure the best efficiency and

 safety of this product. Please keep the manual for future reference.

Model No. : KXT7020BK / KXT7020S

This Haier brand product, when shipped in its original container, will be

free from defective workmanship and materials, and agrees that it will, at

its option, either repair the defect or replace the defective product with a

new or re-manufactured equivalent at no change to the purchaser, for parts

or labor for the periods set forth below:

This warranty does not apply to the appearance of the product or the

exterior of the product, which has been damaged or defaced, altered or

modified in design or construction. It does not apply to the additional

excluded items set forth below:

The warranty commences on the date the item was purchased and the

original purchase receipt must be presented to the authorized service

center before warranty repairs are rendered.

The limited warranty described herein is in addition to whatever implied

warranties may be granted to purchasers by law. ALL IMPLIED

WARRANTIES INCLUDING THE WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO

THE PERIOD(s) FROM THE DATE OF PURCHASE SET FORTH

BELOW. Some states do not allow limitations on how long an implied

warranty lasts, so the above limitation may not apply to you.

Neither the sales personnel of the seller nor any other person is authorized

to make any warranties other than those described herein, or to extend the

duration of any warranties beyond the time period described herein on

behalf of Haier.

The warranties described herein shall be the sole and exclusive warranties

granted by Haier and shall be the sole and exclusive remedy available to

the purchaser. Correction of defects in the manner and for the period of

time described herein, shall constitute complete fulfillment of all abilities

and Responsibility of Haier to the purchaser with respect to the product,

and shall constitute full satisfaction of all claims, whether based on

contract, negligence, strict duality or otherwise. In no event shall Haier be

liable, or in any way responsible for any damages or defects in the product

which were caused by repairs or attempted repairs performed by anyone

other than an authorized service center or dealer; nor shall Haier be liable,

or in any way responsible for incidental or consequential economic or

property damage. Some states do not allow the exclusion of incidental or

consequential damages, so that above exclusion may not apply to you.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU

MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE

TO STATE.

Warranty period for this product: 90 days for Labor, one year for parts.

Additional items excluded from warranty coverage: non-rechargeable

batteries.

Where to obtain service: For the location of the nearest Haier authorized

service center or to obtain product literature, accessories, supplies or

customer assistance, please call 1-877-337-3639.

What to do obtain service: ship or carry in your product to an authorized

service dealer or center. Be sure to have proof or purchase.

If you ship the product, be sure it is packaged carefully.

Haier America

New York, NY 10018

11. Warranty

Table of Contents

1) Read these instructions carefully.

2) Keep these instructions for future reference.

3) Heed all warnings.

4) Follow all instructions.

5) Do not expose to water or moisture.

6) Clean only with a dry cloth.

7) Keep objects away from ventilation openings. Do not block any ventilation openings at

any time.

8) Do not install near any heat sources such as stoves, computer towers, amplifiers or any

apparatus that produce heat.

9) Do not force the power plug in the wall outlet. A polarized plug as two blades with one

wider than the other. The wide blade is provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for replacement of the obselete outlet.

10) Place the power cord so that it is protected from being walked on, pinched by objects, torn

and exposed to liquids, especially at plugs, convenience receptacles, and the point where

they exit from the product.

11) Only use attachments/accessories specified by the manufacturer. Use of attachments/accessories

not recommended by the product manufacturer may cause hazards.

12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13) Unplug the apparatus during lightning storms or when unused for long periods of time.

14) Do not use this apparatus near water, and no objects filled with liquids, such as vases,

shall be placed on the apparatus.

15) Refer all servicing to authorized service personnel.

For recycling or disposal information about this product,

please contact your local authorities or the Electronics

Industries Alliance: www.eiae.org

1. Safety Instructions

1. User Safety Instructions------------------------------------------------------(2)

2. Basic Characteristics and Functions---------------------------------------(3)

3. General Parts---------------------------------------------------------------(3-5)

4. Connection--------------------------------------------------------------------(6)

5. Operation Instructions-----------------------------------------------------(7-8)

6. Battery Installation----------------------------------------------------------(11)

7. Stand Fixture-----------------------------------------------------------------(11)

8. General Specification-------------------------------------------------------(12)

9. General Troubleshooting---------------------------------------------------(13)

10. Accessories List------------------------------------------------------------(14)

11. Warranty--------------------------------------------------------------------(15)

2. Basic Characteristics and Functions

1. TV System: NTSC 3.58 System

2. AV System: NTSC 3.58 System

3. Full Menu on-Screen Display

4. AUTO Search TV channel programming

5. VCD/DVD AV Equipment Connection Port

6. Brightness, Contrast & Color Adjustment

7. Stand By Mode

8. Detachable TV Battery Compartment Stand

9. Headphone Jack

10. English/Deutch/Japanese/Espanol/Chinese OSD language options

12. Stand Holder(Plastic)

11.Rotary Telescopic

Antenna

1. Power Button

2. Menu Button

3. Volume Down Button

4. Volume Up Button

5. Channel Down Button

6. Channel Up Down

7. AV/TV Switch

8. Remote Control Sendor

9. Direc light/Power

/Standby indicator

10. Built In Speakers

3. General Part

FRONT VIEW

19. Car Stand

AV/TV

POWER

MUTE

CH+

TUNE

VOL+VOL-

7 8 9

-/--

CH-

1. AV/TV Switch

2. Volume Down Control

3. Number Selector

4. Stand By button

5. Mute Button

6. Channel Up Control

7. Tune Mode

8. Volume Up Control

9. Channel Down Control

10. Single/Two/Three Digits Selector

11. Picture Button

12. Set Up Button

(2). Remote Control

PIC SETUP

SIDE VIEW

13. Antenna Jack

14. AV IN Jack

15. Headphone Jack

16. Power Source Input Jack

ANT.

AV IN

DC IN-12V

18. Power Cord to DC 12V INPUT

17. Detachable Battery Compartment Stand

(10 X "AA" <UM-3> SIZE batteries are not included)

ANT.

AV IN

ANT.

AV IN

DC IN-12V

Antenna

Red

YELLOW

AUDIO INPUT

VIDEO INPUT

AC Adaptor

Earphone

AC Adaptor

Detachable Battery Compartment Stand

(10 x "AA" <UM-3> SIZE batteries are not included)

Power Cord to

DC 12V Input

(Options)

(1-2)(1-1)

4. Connection

1. Connection of the Antenna (See picture 1-1)

Plug the antenna into the ANT jack (13).

NOTE: The unit can receive CATV/ANT signals from the ANT jack input.

2. Connection of the External AV Equipment (See picture 1-1)

Plug the AV cable into the AV IN jack(14) . (Press AV/TV button(1) to enable the con-

nection of external audio and video equipment).

3. Use of Earphone (See picture 1-1)

- Connect the Earphone to " " at (15) for private listening.

- The speakers will not operate when headphones are connected.

CAUTION : Listening at high power for too long could damage your ears.

4. Connection to the Power Source

(1) Connect one round end of attached AC adaptor or car adaptor to the power source

input jack (16 ) and the other end to the wall outlet at the suitable voltage .(1-1)

(2) Connect the detachable battery compartment stand power cord to the power source

input jack (16). (See picture 1-2)

DC IN-12V

5. The operation of the TV set and remote control

1. The POWER button

After plugging the unit in the power light(9) should be red, press the POWER

button of the unit or the remote to turn the unit on and off.

PICTURE FUNCTION PRESET

2. MENU /PIC/SETUP/TUNE button

The MENU button of the unit controls the following three on-screen functions:

1) PICTURE: To adjust brightness, contrast, etc.

2) FUNCTION: To adjust system , language, and clock functions.

3) PRESET: To adjust auto search, add/delete, fine tuning, etc.

2-2

- PICTURE

Press MENU button of the unit once or the PIC button on the remote to enter.

The PICTURE screen will show the following content (see picture 2-3).

Press CH up or CH down to scroll through these options.

Press VOL up or VOL down to adjust each option.

PICTURE

BRIGHT 32

CONTRAST 32

COLOR 32

TINT 00

2-3

- BRIGHT

Press VOL up to make picture brighter and VOL

down to make picture darker.

- CONTRAST

Press VOL up to increase contrast and VOL down

to decrease contrast.

- COLOR

Press VOL up or VOL down to adjust color levels.

- TINT

Press VOL up or VOL down to adjust tint levels.

Press the MENU button to scroll through these three on-screen options.

Press MENU button of the unit again or the SETUP button on the remote until

FUNCTION screen appears (see picture 2-4).

Press CH up or CH down to scroll through these options.

Press VOL up or VOL down to adjust each option.

- FUNCTION

- SYSTEM

System has been disabled for this unit.

- LANGUAGE

The unit support OSD language in English/Deutch/Japanese/Espanol/Chinese.

FUNCTION

2-4

- TIMER

VOL up is used for setting hour, Press VOL up one time, the time will add one

hour. VOL down is used for setting minutes. Press VOL down one time and the

Clock will add one minute.

- BAND

This feature simply displays what type of frequency is currently displayed (UHF, VHF, etc).

The BAND function can not be adjusted.

- FINE

The FINE feature controls the fine tuning of each channel. Use the VOL up and VOL down but-

tons to fine tune each frequency for better sound and picture.

- SIGNAL

The unit can work with both cable TV and an antenna. Simply adjust this feature to either ANT

for use with an antenna or CATV for use with cable TV.

The unit can receive up to 80 channels with the antenna setting (ANT) and 136 channels with

cable TV(CATV) setting.

- PROG

This function shows the current channel displayed. Use the VOL up

or VOL down buttons to scroll through the channels.

- SKIP

This function allows you to add or delete any channel. If you would

like to delete a channel simply navigate to the desired channel with

the PROG button and press the VOL up or VOL down button until

this function reads “ON”.

If you would like to add a channel simply press the

OL up or VOL

down button until the SKIP feature reads “OFF”.

PRESET

PROG 120

SKIP OFF

BAND VHF-L

FINE

SIGNAL CATV

AUTO

2-5

Press MENU button of the unit or the TUNE button on the remote

until the PRESET screen appears (see picture 2-5).

Press CH up or CH down to scroll through these options.

Press VOL up or VOL down to adjust the desired option.

- PRESET

- AUTO

Use this feature to program all available channels. Use the CH up or CH down

button to highlight the AUTO feature. Then, press VOL up or VOL down to initiate

this feature. Allow the unit to search all possible channels.

NOTE:

If some channels do not have sound use the FINE feature to fine-tune the channel.

If sound does not appear please refer to the Troubleshooting section.

3. AV/TV button

Use the AV/TV button to switch between watching VIDEO and TV. Switch to

VIDEO. when using an external video source such as a DVD or VCR. Switch to

TV to watch TV through the antenna or cable TV.

4. MUTE button

Press the MUTE button one time, there is mute signal on the screen, press again,

the volume will resume.

5. VOL up / VOL down button

Use the VOL up and VOL down buttons to adjust the volume of the unit. The

volume range is 0-63. VOL up and VOL down buttons are also used to adjust

features in the MENU.

6. CH up/ CH down button

Use the CH up and CH down buttons to go from channel to channel. Also use the

CH up and CH down buttons to navigate the MENU functions.

7. NUMERICAL button(0-9)

Numerical button 0-9 is used for selecting program number , button 0-9 has the

function of power on when the TV is in waiting status.

8. -/-- button

If you want to select two-figure or there-figure program number , you need to

press -/-- button, after -/-- shows on the screen, you can use the numerical button

to input the desired program number.

6. Battery Installation( Optional):

Open and remove the battery door located on

the bottom of the battery compartment stand

and pulling firmly outwards. Insert 10 "AA"

x (UM-3) batteriesinto thebatterycompartment

(see right picture). Be sure the polarity (+and-)

matches,as made inside thebattery compartment.

Closethe battery door and connect the power cord

ofthe battery compartment to the power source

input jack of the unit.

NOTE:

Met

ashe

7. Stand Fixture(Optional)

Screw1

Screw2

3-1

3-2

3-3

- Release the metal washer on the top of

the stand but should not separate it from

the stand (see picture 3-1).

- Insert the metal washer with the stand

into a hollow at the back of the unit and

move the stand up to a suitable height

(see picture 3-2).

- Tighten the screw 1 (see picture 3-3) up

on the stand to fix the stand with the unit.

- Control the unit direction by controlling

the screw 2 (see picture 3-3).

- Weak or dead batteries may leak or corrode the set. Always remove batteries

when the set will not be used for a long period of time.

- When the battery box is being charged, forbid the battery box to connect

with a machine, watch TV.

+ – + – + – + – + –

1.  Description: Portable 7” TFT LCD Color TV Set

2.  TV System: NTSC 3.58 System

3.  AV System: NTSC 3.58

4.  Audio System: M

5.  Display device: Color TFT-LCD

6.  Display Screen Size: 7 inches

7.  Video Input: 1Vp-p

8.  Audio Output: O250mW (MAX)

9.  Power Consumption: o11w

10. Resolution: 1440 (H)*234 (V)

11. Dots Distance: 0.107(H) X 0.372(V)mm

12. Visible Range: 154.08(H) X 87.05(V)mm

13. Power Source: AC adaptor or car adaptor (normal: DC 12V)

14. Measurement: 195 (L) X 135 (W) X 30(D) inches

15. Weight: Approx. 490 lbs

16. Connection terminals:

1. Antenna Jack

2. AV Input Jack

3. Headphone Jack

4. External Power Source Input Jack

8. General Specification:

Check the following points before assuming malfunctions of the TV set:

Problem Reasons

No picture & sound

No picture

No sound

Poor reception

Dark or blurred picture

Unclear or unstable picture

Picture moves up &

down, blurs or folds over

No color

Improper connection of AC adaptor or car adaptor.

The batteries are run down or installed incorrectly..

Antenna is not properly attached. Relocate the TV to a place

where reception is better.

Sound volume is too low. The signal is too weak.

TV antenna is not adjusted properly or reception is too weak.

The brightness & contrast are too low.

TV antenna is not properly adjusted or reception is too weak.

TV antenna is not adjusted correctly. The reception is too

weak or compromised by buildings or nearby mountains.

Color is not set correctly..

9. General Troubleshooting

Sound on some channels

but not all

Adjust FINE function up or down in the MENU until sound

is clear.

10. Accessories List

AC Adaptor

Remote Control

AV Cable RCA Jack

Car Cord

Car Stand

Instruction Manual

Exterior Antenna Jack

Fixed Screws (PWA3*14)

Name

Quantity

1 piece

4 pieces

1 piece

Battery Compartment

Earphone

Haier KXT7020BK User manual

Brand: Haier

Model: KXT7020BK

Category: Portable TVs

Type: User manual

Download PDF

report

Haier KXT7020BK User manual

Haier KXT7020BK User manual

Related papers

Other documents