2. Samsung
  3. UH46F5
UH46F5

Samsung UH46F5 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Samsung UH46F5 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the optimum resolution for the Samsung UH46F5?
    What is the maximum resolution for the Samsung UH46F5?
    What type of cable should I use to connect my PC to the Samsung UH46F5?
    What type of cable should I use to connect my video device to the Samsung UH46F5?
    What type of cable should I use to connect my audio system to the Samsung UH46F5?
    How do I connect my Samsung UH46F5 to a LAN network?
    How do I connect my Samsung UH46F5 to an external sensor board?
    What is the power consumption of the Samsung UH46F5?
    What are the dimensions of the Samsung UH46F5?
    What is the weight of the Samsung UH46F5?
Quick Setup Guide
-
WARNING: Please ensure this product is inspected by yourself (to identify if there are any defects)
prior to any installation.
Any defect should be brought to the attention of Samsung as soon as discovered. Please do not
install the product if it appears to have a defect.
Any damage caused by carelessness in the process of installing the product will be treated as
damage caused by yourself (and not a product defect).
To determine whether or not this product has been installed Samsung will view evidence of the
screw hole label being pierced (as well as any other cosmetic evidence of an installation).
- The colour and the appearance may differ depending on the product, and the specifications are
subject to change without prior notice to improve the performance.
- Download the user manual from the website for further details.
http://www.samsung.com/displaysolutions
UH46F5
BN68-08217G-03
The terms HDMI and HDMI High-Denition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
Reverse Side
Issues Solutions
The screen keeps
switching on and off.
Check the cable connection between the
product and PC, and ensure the connection
is secure.
No Signal is displayed
on the screen.
Check that the product is connected
correctly with a cable.
Check that the device connected to the
product is powered on.
Not Optimum Mode is
displayed.
This message is displayed when a
signal from the graphics card exceeds
the product’s maximum resolution and
frequency.
Refer to the Standard Signal Mode Table and
set the maximum resolution and frequency
according to the product specications.
The images on the
screen look distorted.
Check the cable connection to the product.
The screen is not clear.
The screen is blurry.
Adjust Coarse and Fine.
Remove any accessories (video extension
cable, etc) and try again.
Set the resolution and frequency to the
recommended level.
The screen appears
unstable and shaky.
Check that the resolution and frequency of
the PC and graphics card are set within a
range compatible with the product. Then,
change the screen settings if required by
referring to the Additional Information on
the product menu and the Standard Signal
Mode Table.
There are shadows or
ghost images left on
the screen.
Issues Solutions
The screen is too bright.
The screen is too dark.
Adjust Brightness and Contrast.
White does not really
look white.
Go to Picture and adjust the White Balance
settings.
The product will turn
off automatically.
Go to System and make sure Sleep Timer is
set to Off.
If a PC is connected to the product, check
the power status of the PC.
Make sure the power cable is connected
properly to the product and power outlet.
If the signal from a connected device is not
detected, the product automatically turns
off after 10 to 15 minutes.
There is no sound.
Check the connection of the audio cable or
adjust the volume.
Check the volume.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up
to the maximum level, adjust the volume on
your PC sound card or software programme.
The remote control
does not work.
Make sure that the batteries are correctly in
place (+/-).
Check if the batteries are at.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs
switched on in the vicinity.
Troubleshooting GuideChecking the Components Remote sensor
- Contact the vendor where you purchased the product if any
components are missing.
- The pictures may look different from the actual components.
Quick Setup Guide
Warranty card
(Not available in some
locations)
Power cord
Batteries
(Not available in some
locations)
Remote Control DP cable
RS232C(IN) adapter
Holder-Ring x 4 /
Screw x 4
1 Supplies power to the external sensor board.
2 Connect to a USB memory device. (applicable for updates and
Clone Product only)
3 Connects to MDC using a LAN cable.
4
DVI: Connects to a source device using a DVI cable or HDMI-DVI cable.
RGB: Connects a D-SUB cable (via a DVI-RGB adapter) or
a DVI-RGB cable to a PC.
MAGICINFO IN: To use MagicInfo, make sure to connect
the DP-DVI cable.
5 Connects to a source device using an HDMI cable.
6 Connects to a PC using a DP cable.
7 Connects to MDC using an RS232C adapter.
8 Receives the remote control signal via the external sensor board
and outputs the signal via LOOP OUT.
9 Receives sound from a source device via an audio cable.
0 Outputs sound to an audio device via an audio cable.
! Connects to another product using a DP cable.
Remote sensor
Press a button on the remote control pointing at the sensor on the
front of the product to perform the corresponding function.
- Using other display devices in the same space as the remote
control of this product can cause the other display devices to be
inadvertently controlled.
Make sure that the remote control is used within 4 m from the
screen and within 2 m and 50 degrees of the left and right sides of
the monitor. The remote control location may affect the sensor’s
signal reception.
- Store used batteries out of reach of children and recycle.
- Do not use a new and used battery together.
Replace both batteries at the same time.
- Remove batteries when the remote control is not to be used for
an extended period of time.
BN68-08217G-03_QSG_UH46F5_INDIA_ENG.indd 1 2019-06-28 오후 2:32:31
Specifications
Model Name UH46F5
Panel
Size 116.8 cm
Display area
1018.08 mm (H) x 572.67 mm (V)
Synchronization
Horizontal Frequency 30 – 81 kHz, 30 – 134 kHz (DisplayPort), 30 – 90 kHz (HDMI)
Vertical Frequency 48 – 75 Hz, 56 – 75 Hz (DisplayPort), 24 – 75 Hz (HDMI)
Resolution
Optimum resolution 1920 x 1080 @ 60 Hz
Maximum resolution 1920 x 1080 @ 60 Hz, 3840 x 2160 @ 60 Hz (HDMI1, HDMI2, DP)
Maximum Pixel Clock 148.5 MHz (Analogue, Digital), 594 MHz (Displayport, HDMI)
Power Supply
AC100-240V~ 50/60Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries
.
Environmental
considerations
Operating
Temperature: 0 ˚C - 40 ˚C (32 ˚F - 104 ˚F)
Humidity: 10 % - 80 %, non-condensing
Storage
Temperature: -20 ˚C - 45 ˚C (-4˚F - 113˚F)
Humidity: 5 % - 95 %, non-condensing
- This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to
take adequate measures.
- For detailed device specifications, visit the Samsung Electronics website.
- The PVC Free (except for accessory cables) logo is the self-declared trademark of Samsung.
* Accessory cables: signal cables and power cords
Connecting to a PC Connecting the LAN Cable
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Tel. 1800 40 SAMSUNG (1800 40 7267864) (Toll-Free)
www.samsung.com/in/support
Warning! Important Safety Instructions
(Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.)
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present
inside. It is dangerous to make any kind of contact
with any internal part of this product.
This symbol indicates that this product has included
important literature concerning operation and
maintenance.
This product is RoHS compliant.
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of
waste and recycle them responsibly to promote the sustainable reuse of material resources.
For more information on safe disposal and recycling visit our website www.samsung.com/in or contact our Helpline numbers-
1800 40 SAMSUNG(1800 40 7267864) (Toll-Free)
» If your equipment uses an AC adapter:
-
Only use the AC adapter with your product by Samsung.
- Do not use the power cord with other products.
» Do not install this equipment in a confined space such as a case
or similar.
» The slots and openings in the cabinet and in the back or bottom
are provided for necessary ventilation. The slots and openings
must never be blocked or covered.
» The product should be located away from heat sources such as
radiators, heat registers, or other products that produce heat.
» Do not place a vessel containing water (vases etc.) on this
apparatus, as this can result in a risk of fire or electric shock.
(Apparatus shall not be exposed to dripping or splashing)
» The apparatus must be connected to an earthed MAINS socket-
outlet (Class l Equipment only). Or Use only a properly grounded
plug and receptacle (Class l Equipment only).
» To disconnect the apparatus from the mains, the plug must be
pulled out from the mains socket, therefore the mains plug shall
be readily operable.
» As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if you turn off this
unit by POWER.
HDMI IN 1, HDMI IN 2
DP IN 1 (UHD 60Hz), DP IN 2 (UHD 60Hz)
AUDIO IN
DVI/HDMI/AUDIO IN
HDMI IN 1, HDMI IN 2, HDMI IN 3, HDMI IN 4
DVI/RGB/MAGICINFO IN
AUDIO IN
DVI/RGB/MAGICINFO IN
HDMI 1, HDMI 2
DP IN 1 (UHD 60Hz), DP IN 2 (UHD 60Hz)
DVI/RGB/MAGICINFO IN
AUDIO IN
HDMI IN 1, HDMI IN 2, HDMI IN 3, HDMI IN 4
DVI/HDMI/AUDIO IN
DVI/PC/MAGICINFO IN
AUDIO IN
HDMI IN 1, HDMI IN 2, HDMI IN 3, HDMI IN 4
DP IN 1 (UHD 60Hz), DP IN 2 (UHD 60Hz)
DVI/PC/MAGICINFO IN
DVI/PC/HDMI/AUDIO IN
HDMI 1, HDMI 2
AUDIO IN
DVI/PC/MAGICINFO IN
DVI/PC/HDMI/AUDIO IN
HDMI 1, HDMI 2
DP IN 1 (UHD 60Hz), DP IN 2 (UHD 60Hz)
DVI/RGB/MAGICINFO IN
AUDIO IN
HDMI IN 1, HDMI IN 2, HDMI IN 3, HDMI IN 4
DVI/HDMI/AUDIO IN
DVI/PC/MAGICINFO IN
AUDIO IN
DP IN
Connecting to a Video Device
HDMI 1, HDMI 2
AUDIO IN
AUDIO OUT
HDMI 1, HDMI 2
DP IN 1 (UHD 60Hz), DP IN 2 (UHD 60Hz)
DVI/RGB/MAGICINFO IN
AUDIO IN
HDMI IN 1, HDMI IN 2, HDMI IN 3, HDMI IN 4
DVI/HDMI/AUDIO IN
DVI/PC/MAGICINFO IN
AUDIO IN
Connecting to an Audio System
HDMI 1, HDMI 2
AUDIO IN
AUDIO OUT
Use Cat7(*STP Type) cable for the connection.
*Shielded Twist Pair.
RJ45
Connecting an External Monitor
To use old and new models together, rst contact the dealer the
product was purchased from to check if they are compatible.
HDMI IN 1, HDMI IN 2, HDMI IN 3
DP OUT (LOOPOUT)
DVI/MAGICINFO IN
DVI/HDMI/AUDIO IN
HDMI IN 1, HDMI IN 2, HDMI IN 3
DVI/HDMI/AUDIO IN
DVI/PC/MAGICINFO IN
DVI/PC/HDMI/AUDIO IN
Connecting to MDC
For details on how to use the MDC programme, refer to Help after
installing the programme.
The MDC programme is available on the website.
RS232C OUT
RJ45
RS232C IN
RS232C OUT
RJ45
HUB
RS232C OUT
RJ45
RS232C IN
RS232C OUT
RJ45
HUB
RS232C OUT
RJ45
RS232C IN
RS232C OUT
RJ45
HUB
BN68-08217G-03_QSG_UH46F5_INDIA_ENG.indd 2 2019-06-28 오후 2:32:34
/