Hydro Systems PRO6042AWPB Specification

Category
Car kits
Type
Specification
Acrylic models finished in 1/8” thick layer
of deep lustrous acrylic.
Extra thick reinforced fiberglass.
Pre-wired pump on pump platform
(standard pump location only)
Integral E-Z Level platform facilitates
installation.
Non-skid bottom.
8 Fully directional adjustable PVC jets
Anti-vortex safety suction.
Color matched system trim
HydrOzone ozone sanitation system
Rigid PVC piping
Self draining pump and system
Soft Touch electronic on/off control with
30-min. integral timer
2.25 HP Single Speed Pump
Cable waste & overflow
Acrylic Tub construction features
PVC Systems – include:
Page 1 of 2
Approvals & Listings
Commonwealth of Massachusetts
UPC & USPC - US & Canada
Sporting this unique
hourglass shape, the
Providence is deep with
ample room for two. Prop
your arms on the armrests
and relax away the day’s
tension. The Evansport is
the Monterey 7242 Model
in a little shallower depth,
furthering your choices in
this luscious line.
Available Sizes:
60”L x 42”W x 24¾”D
85 Gallons
72”L x 42”W x 24¾”D
90 Gallons
Prov
idence
29132 Avenue Paine, Valencia, CA 91355
Phone (661) 775-0686 • Fax (661) 775-0668
hydro@hydrosystem.com • www.hydrosystem.com
Hydro Systems, Inc.
Disclaimer: Certain options
or altering the pump/blower
location may cause the
pump/blower to extend
beyond the tub decking.
For cutout dimensions wait
for unit to arrive.
All specifications subject to
change without notice.
Page 2 of 2
AS SHOWN:
Whirlpool option w/ standard jets
ALSO A
V
AILABLE:
Soaking Tub Only, Whirlpool,
Thermal Air, Combo
Must be set in mortar base.
Hydro Systems, Inc.
29132 Avenue Paine, Valencia, CA 91355
Phone (661) 775-0686 • Fax (661) 775-0668
hydro@hydrosystem.com • www.hydrosystem.com
Providence
Model GC AC A B C D E F G H I J K L M N Jet Pump Wat.Cap.
6042 N/A 60” 42” 30” 10½” 2” 4½” 2¼” 40” 24¾” 22¼” 29” 1¾” 25” 3¾” 8 2.25 85 gal.
7242 N/A 72” 41¾” 36” 10½” 2” 5¼” 2¼” 50” 24¾” 22¼” 29” 1¾” 25” 3¾” 8 2.25 90 gal.
Amp Volt Breaker Dedicated Service
13.5 120 20 amp GFCI Protected
Island Drop-In 3 Wall Installation
Model (L)ength (W)idth (H)eigth Finish (L)ength (W)idth (H)eigth Leger Molded
6042 58” 40” 24” 60” 42” 25½”
7242 70” 40” 24” 72” 42” 25½”
Must be set in Mortar Base
  • Page 1 1
  • Page 2 2

Hydro Systems PRO6042AWPB Specification

Category
Car kits
Type
Specification

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI