Livex Lighting 5712-05 Operating instructions

Livex Lighting
Brand
Livex Lighting
Model
5712-05
Type
Operating instructions

This manual is also suitable for

Livex Lighting 5712-05 is a versatile lighting fixture that offers ambient lighting for various indoor spaces. It features a classic design with a glass shade and a sturdy metal frame, making it suitable for both traditional and modern decors. The fixture is easy to install and can be mounted on a ceiling or wall, providing ample illumination for rooms, hallways, and other areas. It supports the use of standard light bulbs, allowing you to customize the brightness and warmth of the lighting according to your preference.

Livex Lighting 5712-05 is a versatile lighting fixture that offers ambient lighting for various indoor spaces. It features a classic design with a glass shade and a sturdy metal frame, making it suitable for both traditional and modern decors. The fixture is easy to install and can be mounted on a ceiling or wall, providing ample illumination for rooms, hallways, and other areas. It supports the use of standard light bulbs, allowing you to customize the brightness and warmth of the lighting according to your preference.

ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed.
However, the installation instructions do apply to this product.
5711 5712 5713 5715
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR.
ASSEMBLING THE FIXTURE (Fig.1)
1. Shut off the power at the circuit breaker box. Remove old fixture and
all hardware from Junction Box. Carefully unpack your new fixture
and lay out all the parts on a clear area. Take care not to lose any
small parts necessary for installation.
2. Thread the two mounting screws about 1/4” into the pre-drilled holes
in the mounting plate, spaced about the same distance apart as the
holes in the fixture back plate. Attach the mounting plate to the
junction box using two junction box screws as shown. The side of
the mounting plate marked “GND” must face out. The junction box
is not included.
3. Guide fixture wires through hole in center of mounting plate.
4. Follow wiring instructions carefully (see fig.2)
5. Raise the lamp body(A) onto the mounting plate, aligning the holes
with mounting screws, then lock it securely with the ball nuts(C).
6. Install the light bulbs(not included) in accordance with the fixture’s
specifications. NOTE: DO NOT EXCEED THE MAXIMUN
WATTAGE RATING!
7. Raise the glass shade(D) into the lamp holder cover, lock it securely
with the screws(B) on side.
CONNECTING THE WIRES (Fig.2)
1. Connect the electrical wires as follows. Connect the Black wire from
the fixture to the black house (hot) Wire. Connect the white wire from
the fixture to the white (neutral) house wire. Make sure all wire nuts
are secured. You may wrap the connections with electrical tape. If
your outlet box has a ground wires (green or bare copper) connect
fixture’s ground wire to it. Otherwise attach the bare copper fixture
wire to the green ground screw on the mounting plate.
2. Tuck the wire connections neatly into the wall junction box.
Your installation is now complete. Return power to the
j
unction box and test the fixture.
A
B
D
C
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black(Hot)
FIXTURE
WIRES
White or
Ribbed
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
White
(Neutral)
HOUSE
WIRES
Green or Bare
Copper(Ground)
Thank you for purchasing a LIVEX product.
Need assistance with parts or assembly? Please call customer service at: 800-761-8056
Or visit us on-line at: WWW.LIVEXLIGHTING.COM
©COYRIGHT ALL RIGHTS RESERVED.LIVEX LIGHTING,INC. DOC20151205711
FIG.2
FIG.1
  • Page 1 1

Livex Lighting 5712-05 Operating instructions

Livex Lighting
Brand
Livex Lighting
Model
5712-05
Type
Operating instructions
This manual is also suitable for

Livex Lighting 5712-05 is a versatile lighting fixture that offers ambient lighting for various indoor spaces. It features a classic design with a glass shade and a sturdy metal frame, making it suitable for both traditional and modern decors. The fixture is easy to install and can be mounted on a ceiling or wall, providing ample illumination for rooms, hallways, and other areas. It supports the use of standard light bulbs, allowing you to customize the brightness and warmth of the lighting according to your preference.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents