Toro Air Deflector Kit, Z Master Z100 Series Mowers Installation guide

Form No. 3326-343

Air Deflector Kit

Part No. 105-1683

Installation

Instructions

Z-Master



Traction Units

Loose Parts

Note: Use the chart below to identify parts for assembly.

Description Qty. Use

Air deflector

Bolt

Locknut

Installing the air deflector

Installing the Air Deflector

1. Stop the PTO, set the parking brake, stop the engine,

and remove the ignition key.

2. Allow the traction unit to cool completely.

3. Place the air deflector above the lower flange on the

frame behind the muffler (Fig. 1).

m–5363

Figure 1

1. Frame

2. Air deflector

3. Bolt

4. Locknut

4. Secure the air deflector using the 2 bolts and locknuts

provided (Fig. 1).