Superstrut SECA-B2-20 Specification

Type
Specification
In This Section…
Metal Framing, Pipe Hangers and Accessories
D-1
Superstrut
®
Metal Framing, Pipe Hangers and Accessories
Metal Framing Channels — Overview.............................D-2–D-7
Threaded Products and Hardware.................................D-8–D-13
Fittings and Brackets ..................................................D-14–D-21
Concrete Inserts..........................................................D-22–D-23
Beam Clamps .............................................................D-24–D-32
Pipe Straps, Conduit Clamps and Hangers ..................D-33–D-79
Surface Raceway and Lighting Systems .....................D-80–D-84
Special Metals ............................................................D-85–D-94
Slotted Angle Metal Framing .......................................D-95–D-96
Metal Framing Engineering Data...............................D-97–D-119
Metal Framing Channels — Overview
Metal Framing, Pipe Hangers and Accessories
Thomas & Betts is proud to introduce the new and improved
Trivalent Galv-Krom
®
finish. Galv-Krom
®
finish is a combination
of .5 mils electro-plated Zinc and a gold Trivalent Chromium finish.
New Trivalent Galv-Krom
®
Finish Is RoHS Compliant
Gold Trivalent Chromium Finish — The new Galv-Krom
®
finish
features a Trivalent Chromium formulation that provides all the
features and protection of Hexavalent Chromium (CR VI) without
the use of this chemical compound. Hexavalent Chromium is
restricted by some standards such as the European Union
directive on the restriction of the use of certain hazardous
substances in electrical and electronic equipment (RoHS).
RoHS Compliant — One great feature for the new Trivalent
Chromium formulation is RoHS compliance. Because Hexavalent
Chromium is a substance that is restricted by RoHS, moving away
from a Hexavalent formulation to the new Trivalent formulation will
make the performance of Galv-Krom
®
coating available to customers
affected by RoHS and other standards like RoHS around the world.
Trivalent Galv-Krom
®
Finish Is OSHA Safe — The Hexavalent formulation of the
Galv-Krom
®
finish is safe with regard to the revised 2006 OSHA standard. This new
Trivalent formulation of the Galv-Krom
®
finish does not contain any Hexavalent Chromium and therefore does not
fall under the scope of the OSHA standard at all. As a result, the new Trivalent Galv-Krom
®
finish, just like the
Hexavalent Galv-Krom
®
finish, is OSHA compliant.
ASTM B633 Specification — The improved Galv-Krom
®
finish is applied in compliance with ASTM B633 coating,
the same standard as used previously. This standard outlines electro-deposited coatings of zinc on steel.
D-2
Metal Framing Channels — Overview
Copper Plated (“T” inserted as the second digit
of the part number; Example: CTL-710-2)
Plain steel proceeds through a series of rinse tanks to clean the material
surface. Once cleaned, the fabricated part is etched by dipping into an
acid pickle bath to prepare the surface for adhesion. Copper is electrically
applied by submerging in a copper bath. To seal the finish, the product
continues to a sealer tank and is then dried by forced hot air.
Black (Suffix B)
A black finish is raw steel with only a light oil finish as supplied
by the steel manufacturer. There is no protection against red rust.
Stainless Steel (Suffix SS)
Superstrut channel is supplied in type 304 stainless steel when
required. Type 316 stainless steel may be available upon request.
Aluminum (Suffix AL)
Superstrut channel and hardware are available in aluminum.
Warning:
Load tables, charts and design criteria provided in this catalog
are intended as guides only. Selection of proper product, installation
intervals, erection and placement are the responsibility of the user.
Superstrut
®
products are intended to be used for the support and bracing
of fixtures, cable, pipe and conduit. Improper use or installation may result
in injury to persons or damage of property.
Material and finish specifications are subject to change without notice.
GoldGalv
®
The standard GoldGalv
®
finish is made up of a multi-step electrogalvanizing
and zinc dichromate process. The trivalent Chromium finish is applied over the
zinc, producing a chemically bonded non-porous barrier for protection from
moisture and air. The .5 mil electro-plated zinc and gold trivalent Chromium
finish provide all of the features and protection of hexavalent Chromium
without the use of the chemical.
Green or White Urethane Powder Coated (Suffix GR or WH)
Urethane powder resins are applied electrostatically to the steel after
fabrication. Once the material is completely covered with the powder-form
urethane, it proceeds through a 400˚ baking process for ten minutes,
creating a chemical bond. This results in a minimum of 1.5 mil thickness
of urethane coating, providing excellent resistance to chipping or peeling.
Pregalvanized (Suffix PG)
A zinc coating is applied by hot-dipping the steel coil at the mill prior to
fabrication. Once the material is worked by roll-forming, cutting or punching,
minimal protection is provided for raw edges. This weakness is typical with
precoated material and affects the channel section around holes, extreme
ends and the edges of the “U” shape lips. Superstrut pregalvanized
material is in conformance with ASTM A-525/G-90 specification standards,
representing 0.90 ounces of zinc per square foot of steel. This finish is
often referred to as “hot-dipped mill galvanized” or “mill galvanized.”
Hot-Dipped Galvanized (Suffix HDG)
The material is zinc coated after fabrication, providing total product
protection on all surfaces. The fabricated channel or fitting is suspended
and then dipped into tanks of hot zinc for a prolonged period, creating a
coherent bond. The result is superior corrosion resistance as compared
to pre galvanized material. Hot-dipped galvanizing is not recommended
for threaded products, considering the zinc coating thickness will often
disrupt the threads. Superstrut hot-dipped galvanized is in conformance
with ASTM Specifications A-123 (formerly A-386) and A-153. Superstrut
channels maintain a minimum 1.5 ounces of zinc per square foot of steel
or 2.5 mils (ASTM A-123, Thickness Grade 65). This finish is also referred
to as ”hot-dipped galvanized after fabrication.”
SilverGalv
®
(Suffix EG)
Often referred to as “zinc plated” or “electroplated zinc,” the steel and
.5 mils of zinc are bonded by an electrolysis process. This is the identical
process used in the Kindorf Galv-Krom
®
finish without the numerous benefits
of the gold colored trivalent chromium conversion coat (see Galv-Krom
®
finish for more information). Electrogalvanizing is most commonly applied
to small fittings, hardware and threaded products.
PVC Coated (Suffix PVC)
A polyvinyl chloride (PVC) plastic coating is fused to the channel, fitting
or accessory after fabrication by immersing the part in fluidized PVC tanks.
The fused-melt mixed powder PVC coating thickness is 15 mils (.015") plus
or minus five mils. PVC material is a thermoplastic and will soften in high
temperature. An inherent weakness with PVC coatings occurs when field
alterations are applied, such as cutting or drilling. These acts disrupt the
sealed PVC product and warrant field touch-up. Thomas & Betts cannot
be held responsible for field-altered PVC coated products.
Finishes
D-3
Metal Framing, Pipe Hangers and Accessories
Metal Framing Channels — Overview
D-4
Metal Framing, Pipe Hangers and Accessories
“Soak Degreasing”
Chemical solution
removes bulk of oil
and grease buildup.
“Electro Cleaner”
The metal is
negatively charged
to remove minute
surface particles.
“Rinse”
Live, clear water rinse.
“Sulfuric Acid Bath”
Prepares the metal by
etching the surface for
the zinc application.
“Rinse”
Live, clear water rinse.
“Zinc Tank”
Electrically applies the
zinc metal coating.
“Rinse”
Chemically treated
rinse water.
“Rinse”
Live, clear water rinse.
“Rinse”
Live, clear water rinse.
“Chromate Dip”
A yellow dichromate
conversion coat is applied
to the zinc.
“Rinse”
Live, clear water rinse.
“Dryer”
Hot air is forced
around strut until dry.
GoldGalv
®
The standard GoldGalv
®
finish is made up of a
multi-step electrogalvanizing and zinc dichromate
process. The trivalent Chromium finish is applied
over the zinc, producing a chemically bonded
non-porous barrier for protection from moisture
and air. The .5 mil electro-plated zinc and gold
trivalent Chromium finish provide all of the
features and protection of hexavalent Chromium
without the use of the chemical.
(Refer to page D-5 for more details).
Formed Hot Rolled Steel
Electro-Plated
Zinc Coating
Yellow Dichromate
Conversion Coat
Finishes
(continued)
Metal Framing Channels — Overview
D-5
Metal Framing, Pipe Hangers and Accessories
Strong Abrasion Resistance
SilverGalv
®
provides strong abrasion resistance, even under extreme
conditions, thanks to its unique zinc finish and chromate barrier. The
green paint finishes typically used for strut cannot compare to this
level of protection
Clean Finish
SilverGalv
®
ensures a finished product that leaves no residue on
your hands. In the SilverGalv
®
process, a zinc finish is applied after
fabrication. As a result, all the oil and grime that accumulates during
manufacturing gets thoroughly cleaned off during the plating process
Paintable Surface
Applying SilverGalv
®
after fabrication provides the end user
with a clean, smooth surface to paint
Interchangeable Silver Color
SilverGalv’s silver hue means it can be used interchangeably with
either standard pre-galvanized channel systems or silver colored
fittings commonly used with green painted strut systems
No More White Rust
With pre-galvanized strut, white rust frequently taints the zinc finish.
With SilverGalv
®
, this problem is eliminated thanks to a clear
chromate applied over the zinc that stops white rust from forming
Punched Holes and Cut Ends are Protected
Unlike a pre-galvanized finish where steel holes and cuts have no
corrosion protection, Silver-Galv
®
protects every portion of the strut.
Because SilverGalv’s finish is applied after fabrication, all punched
holes and cut ends share a consistent quality with the rest of the
material
Finishes
(continued)
Standard Channels
Material
Channels are cold formed from hot-rolled pickled and oiled strip steel.
Material Thickness
All Series 1200 12 gauge material
All Series 1400 14 gauge material
Standard Lengths
Standard lengths for channel are 10 ft. and 20 ft.
Standard length tolerance ±
1
8".
Shorter lengths are available at a small cutting charge.
GoldGalv
®
hardware finish is standard for all Superstrut
products. This is a multi-process finish of electro-plated
zinc, followed by gold colored zinc dichromate to give
excellent corrosion resistance and superior paint base.
See page D-4 for a complete description of the GoldGalv
®
hardware finish. GoldGalv
®
hardware will be furnished
if no other finish is specified.
A Series
B Series C Series E Series H Series
SilverGalv
®
Electro-Galvanized Finish From Superstrut
®
Protection is the name of the game and SilverGalv
®
delivers a winning combination of features designed to meet the most exacting specifications.
SilverGalv
®
offers the ultimate in corrosion protection versatility and performance, including…
1
5
8
1
5
8
1
5
8
1
5
8
1
5
8
7
8
7
8
7
8
7
8
7
8
3
1
4
2
7
16
1
3
8
13
16
1
5
8
SilverGalv
®
provides more corrosion protection than
Pre-Galvanized or Green Painted finishes.
Metal Framing Channel Finish
Corrosion Resistant Testing, ASTM B117
Salt Spray Hours
Industry
Enamel
Green
Epoxy
Green
Industry
Pre-Galvanized
G90
SilverGalv
®
New
Trivalent
GoldGalv
®
1100
1000
900
800
700
600
500
400
300
200
100
0
Metal Framing Channels — Overview
D-6
Metal Framing, Pipe Hangers and Accessories
B-1400
Channel available in Solid, Half Slot, Punched
and Slotted configurations.
Wt./Ft. 0.90 lbs.
E-1200
Channel available in Solid, Half Slot
and Punched configurations.
Wt./Ft. 2.47 lbs.
H-1200
Channel available in Solid, Half Slot
and Punched configurations.
Wt./Ft. 3.05 lbs.
A-1400
Channel available in Solid, Half Slot, Punched,
Slotted and Knockout configurations.
Wt./Ft. 1.40 lbs.
A-1200
Channel available in Solid, Half Slot, Punched,
Slotted and Knockout configurations.
Wt./Ft. 1.90 lbs.
B-1200
Channel available in Solid, Half Slot,
Punched and Slotted configurations.
Wt./Ft. 1.28 lbs.
C-1200
Channel available in Solid, Half Slot
and Punched configurations.
Wt./Ft. 1.70 lbs.
1
5
8
1
5
8
1
5
8
1
5
8
1
5
8
1
5
8
1
5
8
1
5
8
7
8
7
8
7
8
7
8
7
8
7
8
7
8
9
32
3
8
9
32
9
32
9
32
9
32
9
32
9
32
13
16
1
3
8
1
5
8
12
ga
12
ga
12
ga
13
16
Metal Framing Channels — Overview
D-7
Metal Framing, Pipe Hangers and Accessories
Half Slot Channel
STD.
CAT. NO.
DIM. (IN.) GA. CTN.
A-1200-HS 1
5
8 x 1
5
8 12 *
B-1200-HS 1
5
8 x
13
16 12 *
C-1200-HS 1
5
8 x 1
3
8 12 500
E-1200-HS 1
5
8 x 2
7
16 12 500
H-1200-HS 1
5
8 x 3
1
4 12 *
A-1400-HS 1
5
8 x 1
5
8 14 *
B-1400-HS 1
5
8 x
13
16 14 500
9
16
" x 1
1
8
" slots on 2" centers.
* Standard lengths 10 ft. and 20 ft. for standard cartons.
Please consult your local T&B representative.
2"
1
7
8
"
STD.
CAT. NO.
DIM. (IN.) GA. CTN.
A-1200-P 1
5
8 x 1
5
8 12 500
B-1200-P 1
5
8 x
13
16 12 500
H-1200-P 1
5
8 x
13
16 12 500
A-1400-P 1
5
8 x 1
1
2 14 500
B-1400-P 1
5
8 x
13
16 14 500
9
16
" holes on 1
7
8
" centers.
Available in 10 & 20 ft. lengths.
Superstrut
®
Channels —
Welding Combinations
All Superstrut
®
Channels are available in a variety
of combinations
some are shown here.
Multiple channels are spot welded on 3" centers.
2*
2-A
2-B
2-C
3-D
3-C
3-A
3-B
4
Hole Configurations
STD.
CAT. NO.
DIM. (IN.) GA. CTN.
A-1200-S 1
5
8 x 1
5
8 12 *
B-1200-S 1
5
8 x
13
16 12 *
A-1400-S 1
5
8 x 1
5
8 14 *
B-1400-S 1
5
8 x
13
16 14 *
7
16
" x 3" slots on 4" centers.
* Standard lengths 10 ft. and 20 ft. for standard carton.
Please consult your local T&B representative.
STD.
CAT. NO.
DIM. (IN.) GA. CTN.
A-1200-KO 1
5
8 x 1
5
8 12 *
A-1400-KO 1
5
8 x 1
5
8 14 *
KO for
1
2
" conduit.
Please consult your local T&B representative.
Standard Finish – GoldGalv
®
brand.
4"
6"
Channel with Knockouts
Punched Channel
Slotted Channel
How to Order
10 and 20 ft. lengths — steel. Special lengths may be ordered.
Replace the 3 last digits of the regular channel catalog number
with the designation of the desired combination.
EXAMPLES:
Two A-1200 channels back to back are ordered as A-1202.
Two A-1200 channels back to side are ordered as A-1202-C.
Specify desired finish or material.
*“A” and “B” Series back-to-back combinations are joined using
Thomas & Betts’ steel rivet joining process. The riveted channel is
offered in standard GoldGalv
®
, stainless steel, painted, pre-galvanized
and hot-dip galvanized finishes.
Threaded Products & Hardware
D-8
Metal Framing, Pipe Hangers and Accessories
SIZE DESIGN STD.
CAT. NO.
DESCRIPTION (IN.) LOAD LBS. CTN.
H 122 1/4
1
4" Galv-Krom
®
1
4 150 50
H 122 3/8
3
8" Galv-Krom
®
3
8 590 50
H 122 1/2
1
2" Galv-Krom
®
1
2 1,080 50
H 122 1/4 EG
1
4" SilverGalv
®
1
4 150 50
H 122 3/8 EG
3
8" SilverGalv
®
3
8 590 50
H 122 1/2 EG
1
2" SilverGalv
®
1
2 1,080 50
H 122 1/4 SS6
1
4" Type 316 Stainless Steel
1
4 150 50
H 122 3/8 SS6
3
8" Type 316 Stainless Steel
3
8 590 50
H 122 1/2 SS6
1
2" Type 316 Stainless Steel
1
2 1,080 50
Hold in the open position.
No need to thread the Trapnut
®
fastener from either end of the
rod — saving valuable time
Perfect for retro-fit applications where
the rod ends are not accessible
Press the pin with pliers.
Locking pin holds it in the desired
position
Can be removed and reused
Insert the bottom plate on the rod
and close the top plate.
Precision threads trap the threaded
rod for a sturdy hold that can be
adjusted up or down for fine-tune
positioning
Functions as a hex nut, square
washer and fla
t washer combined
Tighten to the desired position
with pliers.
Can be adjusted up or down
for fine-tuned positioning
Sturdy steel construction
tha
t is load bearing
Sized to provide custom fit for
either 1
5
8" or 1
1
2" strut systems
1
Easy to Install
2
3
4
Features and Benefits
The unique scissor action of the Trapnut
®
Strut Fastener closes at any
desired position on the threaded rod. Once closed, precision threads trap the
threaded rod for a sturdy hold that can be adjusted up or down for fine-tune
positioning. While the versatile Trapnut has a locking pin that holds it in the
desired position, it can also be removed and reused.
Trapnut
®
Strut Fastener
Standard method using nuts
and washers.
New method using Trapnut
®
Strut Fastener.
Unlike a hex nut, there is no need to
thread the Trapnut
®
from either end of
the rod, saving valuable time on the job.
While the Trapnut
®
Strut Fastener is a
time-saver for new construction, it is
invaluable for retro-fit applications.
Rather than disassembling an existing
trapeze to run additional conduit above
it, the Trapnut
®
fastener can be clamped
between the existing trapeze and the
beam clamp for a speedy retro-fit solution.
It’s ideal for applications where the rod
ends are not accessible.
The Trapnut
®
fastener has a sturdy steel
construction that is load bearing, so you
can be confident of a solid installation.
And, the Trapnut
®
fastener functions
as a hex nut, square washer and flat
washer combined, so there are fewer
parts to keep up with on the job.
H 122 3⁄8
Trapnut
®
Strut
Fastener Galv-Krom
®
H 122 3⁄8 EG
Trapnut
®
Strut
Fastener SilverGalv
®
Threaded Products & Hardware
D-9
Metal Framing, Pipe Hangers and Accessories
AB-241L
BOLT STD.
CAT. NO.
SIZE (IN.) CTN.
AB-241L-1/4
1
4 100
AB-241L-5/16
5
16 100
AB-241L-3/8
3
8 100
AB-241L-1/2
1
2 100
AB-241L-5/8
5
8 100
BOLT STD.
CAT. NO.
SIZE (IN.) CTN.
AB-241-1/4
1
4 100
AB-241-5/16
5
16 100
AB-241-3/8
3
8 100
AB-241-1/2
1
2 100
AB-241-5/8
5
8 100
AB-241-3/4
3
4 50
Located Square WasherSquare Washer
AB-241
Trap-Eze
Connector
The innovative Trap-Eze
Connector changes a time-consuming retro-fit
trapeze application into a streamlined process. Using a Trapnut
®
Strut
Fastener, the new Trap-Eze
Connector can be easily installed above or
to the side of an existing assembly, eliminating the need to disassemble
and reassemble the trapeze. It is designed for use with shorter strut
lengths that can vary in length by as much as an inch, so the strut
can be rough cut versus labor-intense precision cuts.
Easily installs above or to the side of an existing
assembly, eliminating the need to disassemble
and reassemble the trapeze
Connectors can be reused upon disassembly of a trapeze
Designed for either
3
8" and
1
2" threaded rod
Designed for use with the innovative Trapnut
®
Strut
Fastener, which can take up to 43% less time than
standard nuts and washers on retro-fit trapeze applications
View window provides safety zone for strut length
STD.
CAT. NO.
DESCRIPTION CTN.
For 1
1
2
Strut
B998 Trap-Eze
End Connector Gold-Galv
®
20
B999 Trap-Eze
Mid Connector Gold-Galv
®
10
B998EG Trap-Eze
End Connector EG 20
B999EG Trap-Eze
Mid Connector EG 10
Easily installs above
existing trapeze.
Can be used to extend
existing trapeze.
View window provides strut
length safety zone for rough
cuts versus precision cuts.
Unique safety slot maintains
bracket position on threaded rod
and prevents disengagement
of the trapeze system.
Designed for use with
the innovative Trapnut
®
Strut Fastener.
Handle Retro-Fit Trapeze
Applications with Ease!
Threaded Products & Hardware
D-10
Metal Framing, Pipe Hangers and Accessories
Channel Nuts
Superstrut
®
channel nuts are manufactured from mild steel
and are case hardened.
Design Data
Superstrut
®
self-aligning channel nuts are designed to provide resistance
to pull out and resistance to side slip in excess of the full strength of the
channels with which they are used. The extreme resistance to side slip
results from the unique design of the alternate teeth, spaced and designed
to develop a wedging action that increases with pressure or load.
UC-100 Universal Cone Nut
Eliminates the inventory and installation hassles of conventional spring nuts.
Fits all 1
5
8" channel, regardless of depth, with a simple twist of your thumb.
Pliable nylon cone secures the nut in place through the entire range of
construction site temperatures.
Screw Threads
THREAD SIZE (IN.)
1
4
5
8
3
8
1
2
THREADS PER INCH 20 18 16 13
DESIGN TORQUE (FT.–LBS.) 61119 50
Standard Finish – GoldGalv
®
, unless otherwise stated.
All threaded products are American Standard thread, free fit class 2.
GoldGalv
®
hardware finish is standard for all Superstrut
®
products.
This is a multi-process finish of electro-plated zinc, followed by gold-
colored zinc dichromate to give excellent corrosion resistance and a
superior paint base. See pages D-3–D-4 for a complete description
of the GoldGalv
®
hardware finish.
NOTE: Standard Spring and Springless Nuts are supplied with a silver electro-galvanized (EG)
finish. These items are not visible in a gold system and are universal with other systems’
finishes and colorations.
Load Ratings for
1
4",
3
8" and
1
2" Strut Nuts
used in Superstrut
®
CHANNEL NUT
SLIP TEST PULL TEST
SIZES (IN.)
RATING RATING
1
4 300 500
3
8 750 1,000
1
2 1,200 2,000
If connections will be subjected to dynamic or seismic loading conditions,
contact the factory for design assistance.
1. All ratings have safety factor of 3 applied.
2. Load ratings are for Static Applications.
Threaded Products & Hardware
D-11
Metal Framing, Pipe Hangers and Accessories
Nuts & Bolts
Sizes:
1
4",
3
8", *
1
2"
& **100B
1
2"
For all 1
5
8" channel.
*Will not fit “B” series channel.
**For “B” Series channel.
GoldGalv
®
Finish.
Sizes:
1
4",
5
16",
3
8" &
1
2"
Nut is square over
1
2" size.
For all “B” series channel
and inserts.
Sizes:
1
4",
5
16",
3
8",
1
2",
5
8",
3
4" &
7
8"
Nut is square over
1
2" size.
For all “A and “C” series
channel and inserts.
Sizes:
3
8",
1
2" &
5
8"
Nut is square over
1
2" size.
For all “E” and “H” series
channel and inserts.
Sizes:
1
4",
5
16",
3
8",
1
2",
5
8" &
3
4"
Nut is square over
1
2" size.
For use with all channels.
Silver Electroplated Finish.
Sizes:
1
4",
3
8",
1
2",
5
8" &
3
4"
Nut is square over
1
2" size.
For all “A”, “C”, “E” and “H” series
channel and inserts.
Sizes:
1
4",
3
8",
1
2",
5
8",
3
4",
7
8" & 1"
GoldGalv
®
Finish.
Sizes:
3
8" &
1
2"
GoldGalv
®
Finish.
Sizes:
1
4",
5
16",
3
8",
1
2" &
5
8"
GoldGalv
®
Finish.
Sizes:
1
4",
5
16",
3
8",
1
2",
5
8",
3
4" &
7
8"
GoldGalv
®
Finish.
Sizes:
1
4",
3
8",
1
2" &
5
8"
GoldGalv
®
Finish.
CM-100 Nylon
Cone Nut
H-100 Long
Spring Nut
B-100 Short
Spring Nut
AC-100
Springless Nut
A-100 Regular
Spring Nut
AB-100
Springless Nut
E-146 Standard Square Nut
UC-100 Universal
Nylon Cone Nut
ES-145 Swivel Nut
and Jam Nut
Combinations
E-147 Flat Steel Washer
E-142 Hex Head
Cap Screw
E-149 Slotted Hex
Indented Head
Machine Screw
E-145 Standard Hex Nut
E-148 Lock Washer
Sizes:
1
4" x 1",
1
4" x 1
1
2",
3
8" x 1",
3
8" x 1
1
2",
1
2" x
15
16"
&
1
2" x 1
1
2"
See price sheet for additional sizes.
Sizes:
1
4" x
3
4",
1
4" x 1",
5
16" x 1
1
4" &
3
8" x 1
1
4"
E-150-S
Lag Bolt Screw
Size:
3
8" &
1
2"
Drill Size:
1
4" & 1
11
32"
E-151-D Wood Screw Drive
Size A:
1
4"
Size B: 2"
Max. Rec. Load: 100 lbs.
ES-142 Seismic
Stiffner Nut
Size: ES-142-
1
2 x 1
1
2"
Bolt Dia.:
1
2"
A
B
Sizes:
1
4",
3
8" &
1
2"
For all 1
5
8" & 1
1
2" channels.
May be used with ALL strut
depths. Can be used for CM-100,
A-100, B-100 & AB-100 Series.
GoldGalv
®
Finish.
Threaded Products & Hardware
D-12
Metal Framing, Pipe Hangers and Accessories
Nuts & Bolts
(continued)
A B DESIGN STD.
CAT. NO.
(IN.) (IN.) LOAD LBS. CTN.
E120 3/8 1
3
8
3
8 1,000 25
E120 1/2 1
1
2
1
2 1,800 25
E-120
A B DESIGN STD.
CAT. NO.
(IN.) (IN.) LOAD LBS. CTN.
E122 3/8 1
3
8
3
8 1,000 25
E-122-1/2 1
1
2
1
2 1,800 10
E-122
A B DESIGN STD.
CAT. NO.
(IN.) (IN.) LOAD LBS. CTN.
E130 3/8 1
3
8
3
8 1,000 25
E-130-1/2 1
1
2
1
2 1,800 25
E-130
A B DESIGN STD.
CAT. NO.
(IN.) (IN.) LOAD LBS. CTN.
E131 3/8 1
3
8
3
8 1,000 25
E-131-1/2 1
1
2
1
2 1,800 10
Standard Finish – GoldGalv
®
, unless otherwise stated.
E-131
A
A
A
A
B
B
B
B
A
Standard Finish – GoldGalv
®
, unless otherwise stated.
Fender Washer
SIZE DIA. HOLE STD.
CAT. NO.
(IN.) (IN.) STD. (IN.) CTN.
EF147 1/4
1
4 1
1
4
5
16 100
EF-147-3/8
3
8 1
1
2
7
16 100
EF-147-1/2
1
4 2
9
16 100
EF-147
Regular Spring Stud Nut
BOLT LENGTH STD.
CAT. NO.
DIA. (IN.) A (IN.) CTN.
A182 1/4 1
1
4 1 250
A-182-1/4 X 1-1/4
1
4 1
1
4 250
A-184-3/8 X 1
3
8
150
A-184-3/8 X 1-1/4
3
8
1
1
4 50
A-185-1/2 X 1
1
2 150
A-185-1/2 X 1-1/4
1
2 1
1
4 50
For all “A” and “C” series channels.
Springless Stud Nut
BOLT LENGTH STD.
CAT. NO.
DIA. (IN.) A (IN.) CTN.
A177 1/4 1
1
4 150
A-177-1/4 X 1-1/4
1
4 1
1
4 250
A-179-3/8 X 1
3
8
1 250
A-179-3/8 X 1-1/4
3
8
1
1
4 50
A-180-1/2 X 1*
1
2 1 250
A-180-1/2 X 1-1/4*
1
2 1
1
4 250
* Cannot be used with “B” Series channel.
A-177 to A-180
A-182 to A-185
A
Swivel Eye
Swivel Eye with Stud
Swivel Joint
Swivel Joint with Stud
A
Threaded Products & Hardware
D-13
Metal Framing, Pipe Hangers and Accessories
Threaded Rod
E-151
Black available upon request
Machine-threaded opposite end, carbon steel
Order by Cat. No., rod size and rod length
SIZE THREADS DESIGN STD.
CAT. NO.
(IN.) PER INCH LOAD LBS. CTN.
H-104-1/4
1
4 20 150 *
H-104-3/8
3
8 16 610 *
H-104-1/2
1
2 13 1,130 *
H-104-5/8
5
8 11 1,810 *
H-104-3/4
3
4 10 2,710 *
H-104-7/8
7
8 9 3,770 *
H-104-1 1 8 4,960 *
Black available upon request.
*Standard lengths 6 ft., 10 ft. and 12 ft.
Standard Finish – GoldGalv
®
, unless otherwise stated.
H-104 Series Rod
ROD STANDARD STD.
CAT. NO.
SIZE (IN.) ROD LENGTHS CTN.
E-151-3/8
3
8 4, 6, 8, 10, 12 100
E-151-1/2
1
2 4, 6, 8, 10 100
ROD A STD.
CAT. NO.
SIZE (IN.) (IN.) CTN.
H-119-1/4X3/8
1
4
3
8 1
1
2 50
H-119-3/8X1/2
3
8
1
2 1
1
4 50
H-119-1/2X5/8
1
2
5
8 1
1
4 50
H-119-5/8X3/4
5
8
3
4 1
1
2 50
H-119-3/4X7/8
3
4
7
8 1
3
4 50
ROD A STD.
CAT. NO.
SIZE (IN.) (IN.) CTN.
H-119-1/4
1
4
7
8 50
H-119-5/16
5
16
7
8 50
H-119-3/8
3
8 1
1
8 50
H-119-1/2
1
2 1
1
4 50
H-119-5/8
5
8 2
1
8 50
H-119-3/4
3
4 2
1
4 50
H-119-7/8
7
8 2
1
2 50
H-119-1 12
1
4 50
Standard Finish – GoldGalv
®
,
unless otherwise stated.
A
A
DATA FOR PRESSURE PIPING
ROD ULTIMATE ROOT AREA NOMINAL MAX. SAFE STD.
CAT. NO.
SIZE LOAD IN LBS. THREAD PIPE SIZE LOAD AT 450° CTN.
R628-6 FT.
1
420 900 .027 300
R638-6 FT.
3
816 1,900 .068
3
4"–2" 610 150
R648-6 FT.
1
213 3,500 .126 2
1
2"–3
1
2" 1,130 60
R1028-10 FT.
1
420 900 .027 500
R1038-10 FT.
3
816 1,900 .068
3
4"–2" 610 250
R1048-10 FT.
1
213 3,500 .126 2
1
2"–3
1
2" 1,130 100
‡ Load Ratings based on safely factor of three.
U-571, U-572 Conduit Clamp
CONDUIT MAX. FLANGE DIM. STD.
CAT. NO.
SIZE (IN.) THICKNESS (IN.) A (IN.) CTN.
U-571
1
2 11
3
4 25
U-571
3
4
3
4 1
3
4 25
U-571 1
1
2 1
3
4 25
U-572
3
4 1
1
2 2
1
2 25
U-572 11
1
4 2
1
2 25
U-572 1
1
4 12
1
2 25
U-572 1
1
2
5
8 2
1
2 25
Standard Finish – GoldGalv
®
brand.
For attaching
1
2
" thru 1
1
2
" conduit to beam, channel, angle or column.
Secures conduit to the support parallel or at right angles to it.
5
16
" set screw, 12 ga. material.
Beam Clamps for Mounting Pipe and Conduit
U-571, U-572
A
H-104 — Hanger Rod: Continuous ThreadE-151 — Coach Screw Rod
R-Series Continuous Thread Rod — Galvanized Standard Rod
Coupling
Reducing Rod
Coupling
Fittings & Brackets
D-14
Metal Framing, Pipe Hangers and Accessories
Fittings & Brackets — Series 200
Material
Superstrut
®
fittings and brackets are manufactured
from hot rolled carbon steel.
Dimensions
The following standard dimensions apply to all fittings
except as indicated on the individual drawings.
Hole spacing:
13
16" from end of fittings
Hole spacing: 1
7
8" centers
Hole size:
9
16" diameter
Material: 1
5
8" wide
Material:
1
4" thickness
Application Instructions
Parts drawings illustrate a typical use for the fitting,
and in many cases other uses for the part are
appropriate.
Design Data
Ratings vary when used with 12 or 14 gauge channel
and are shown for each channel material.
GoldGalv
®
hardware finish is standard for all Superstrut
®
products. This is a multi-process finish of electro-plated
zinc, followed by gold-colored zinc dichromate to give
excellent corrosion resistance and a superior paint base.
See page D-3 for complete description of the GoldGalv
®
hardware finish. GoldGalv
®
hardware will be furnished
if no other finish is specified.
Nuts and Bolts Required
Unless otherwise noted, nuts and bolts for use with
fittings and brackets should be ordered separately.
The standard bolt for the
9
16" hole is a
1
2" hex head
cap screw
15
16" long. The
15
16" length may be used
with all series channel.
Standard Finish – GoldGalv
®
, unless otherwise stated.
1
7
16"
3
1
2"
4
1
8"
3
1
2"
3
1
2"
4
1
8"
AB214
AB216
Standard Finish – GoldGalv
®
, unless otherwise stated.
Hole Spacing:
13
16" From End
Hole Spacing: 1
7
8" Centers
Hole Size :
9
16" Diameter
Material: 1
5
8" Width
Material:
1
4" Thick
. . . . . . . . . . . . Standard Dimensions . . . . . . . . . . . .
4
1
8"
1
7
16"
3
1
2"
3
1
2"
2
1
4"
AB204
AB213
AB205
1
5
8"
2
1
4"
2"
1
7
8"
4
1
8"
13
16"
1
7
8"
4
1
8"
1
7
16"
3
1
2"
AB201
AB203
AB202
AB206
AB207
3
1
2"
5
3
8"
3
1
2"
3
1
2"
AB219
5
3
8"
3
1
2"
AB220
AB240
7"
3
5
8"
Fittings & Brackets
D-15
Metal Framing, Pipe Hangers and Accessories
STD.
CAT. NO.
A (IN.) CTN.
AB252 1 3
7
8 10
AB252 2 5
7
8 10
AB252 3 7
7
8 10
AB252 4 9
7
8 10
A
1
7
8"
AB252
3
1
2"
1
7
16"
4
1
8"
4
1
8"
1
7
16"
3
1
2"
AB254 R
AB254 L
AB284 R
3
1
2"
4
1
8"
5
3
8"
Hole Spacing:
13
16" From End
Hole Spacing: 1
7
8" Centers
Hole Size :
9
16" Diameter
Material: 1
5
8" Width
Material:
1
4" Thick
. . . . . . . . . . . . . . . Standard Dimensions . . . . . . . . . . . . . . .
AB284 L
X201
AB299
5
3
8"
4
1
8"
3
1
2"
2"
2"
2
1
2"
2
1
2"
4
7
8"
1
7
8"
X204
Slot size is
9
16
"x 1
1
2
"
X299
X289
1
1
2"
1
5
16"
1
5
8"
2
5
8"
4
1
8"
3
1
2"
1
3
8"
6
3
8"
1
7
8"
1
1
2"
4"
N205
3
1
2"
5
3
8"
3
7
8"
1"
1
1
16"
3
3
4"
3
3
4"
Standard Finish – GoldGalv
®
, unless otherwise stated.
N-219
AB-242
For use with either
3
8
"
or
1
2
" hanger rod
AB274
3
1
2"
1
5
8"
2
1
4"
3
1
2"
1
7
8"
2"
AB260 R
1
7
8"
2"
3
1
2"
AB260 L
AB253
5
3
8"
5
3
8"
AB255
3
1
2"
3
1
2"
AB257
5
3
8"
3
1
2"
AB261
5
3
8"
5
3
8"
AB263
AB265
5
3
8"
5
3
8"
5
3
8"
3
1
2"
X207
7
1
4"
9
1
8"
X208
5
3
8"
Fittings & Brackets
D-16
Metal Framing, Pipe Hangers and Accessories
Z Shape Fittings
A209
For attaching “A” series channel.
B209
For attaching “B” series channel.
C209
For attaching “C” series channel.
1
3
8"
2
1
8"
1
1
16"
2
1
8"
1
1
16"
1
1
16"
2
1
8"
1
5
8"
13
16"
CZ209
For attaching “A” back to back.
EZ209
For attaching “E” series channel.
Hole Spacing: 1
3
16" From End
Hole Spacing: 1
7
8" Centers
Hole Size: 1" Diameter
Material: 1
5
8" Width
Material:
1
4" Thick
Standard Finish – GoldGalv
®
, unless otherwise stated.
. . . . . . Standard Dimensions . . . . . .
1
7
8"
2
7
16"
1
7
8"
3
1
4"
Hole Spacing: 1
3
16" From End
Hole Spacing: 1
7
8" Centers
Hole Size: 1" Diameter
Material: 1
5
8" Width
Material:
1
4" Thick
. . . . . . Standard Dimensions . . . . . .
Standard Finish – GoldGalv
®
, unless otherwise stated.
A217
A218
AW204
1
21
32"1
5
8"
3
3
4"
3
7
8"
1
21
32"
1
5
8"
3
7
8"
2"
1
7
8"
5
7
8"
AW205-R
AW214
1
7
8"
3
7
8"
1
3
4"
1
7
8"
1
3
4"
1
7
8"
AW205 L
AW219
AW220
AW224
3
7
8"
1
5
8"
1
21
32"
9
5
32"
1
5
8"
1
21
32"
2"
1
7
8"
5
13
32"
1
5
8"
1
21
32"
5
7
16"
3
7
8"
AW226
AW228
1
21
32"
1
5
8"
3
7
8"
3
3
4"
9
5
32"
1
21
32"
1
5
8"
2"
5
13
32"
Wing Shape Fittings
1
7
8"
Fittings & Brackets
D-17
Metal Framing, Pipe Hangers and Accessories
U Shape Fittings
5c"
1e"
A208
Does not include strut nut or
bolts. For “A” series channel.
A210
For attaching “A" series channel
A211
For attaching “A" series channel.
7
1
4"
1
5
8"
5
3
8"
5
3
8"
3
1
4"
A212
B210
5
3
8"
1
21
32"
1
5
8"
1
5
8"
3
9
32"
7"
C210
For attaching “C" series channel.
E210
For attaching “E" series channel.
2
7
16"
5
3
8"
1
21
32"
5
3
8"
AB245
AB-288
3
9
32"
1
7
8"
1
21
32"
1
1
16"
1"
1
21
32"
1
4"
10 ga.
1
1
2"
2
1
2"
3
4"-16
UNF
Thread
A-213
1
11
32"
3
32"
1
3
8"
4
1
2"
7
8"
3
16"
1
3
8"
Standard Dimensions
Hole Spacing: 1
3
16" From End
Hole Spacing: 1
7
8" Centers
Hole Size:
9
16" Diameter
Material: 1
5
8" Width
Material:
1
4" Thick
Standard Finish – GoldGalv
®
, unless
otherwise stated.
AB227
1
1
16"
3"
45˚
2
5
16"
1
5
8"
B
1
5
8"
A
A B STD.
CAT. NO.
(IN.) (IN.) CTN.
AB239 1 7
13
16 8
1
2 15
AB-239-2 13
3
4 17 10
AB-239-3 19
3
4 25
1
2 10
Standard Finish – GoldGalv
®
, unless otherwise stated.
AB-239
2
1
2"
45˚
3
1
2"
AB225
Angular Fittings
AN211
4
7
8"
5
3
8"
1
21
32"
1
21
32"
Fittings & Brackets
D-18
Metal Framing, Pipe Hangers and Accessories
Post Bases
AP-232
AP-232SQ
3
1
2"
1
11
16"
1
5
8"
1
11
16"
6"
4
1
4"
4
1
4"
6"
3
1
2"
3
1
4"
6"
6"
6"
6"
4
1
4"
3
1
2"
4 Holes
3
4" Dia.
2 Holes
3
4" Dia.
2 Holes
3
4" Dia.
4 Holes
3
4" Dia.
3
5
16"
4 Holes
3
4" Dia.
4
1
4"
4 Holes
3
4" Dia.
3
1
2"
AP-232FL
AP-235FL
AP-231
AP-231SQ
AP-231FL
AP-234
AP-234SQ
AP-234FL
AP-206
AW-239
AP-235
AP-235SQ
5"
3
1
2"
1
5
8"
4 Holes
7
16" Dia.
5
8"
Standard Finish – GoldGalv
®
, unless otherwise stated.
4
1
2"
4
1
2"
1
5
8"
1
11
16"
1
5
8"
6"
6"
4
1
2"
4
1
2"
8"
8"
6
1
2"
6
1
2"
3
1
8"
3
1
8"
3"
6
1
2"
3
1
2"
3
1
2"
1
11
16"
1
5
8"
1
5
8"
1
5
8"
1
5
8"
1
5
8"
1
5
8"
1
5
8"
1
15
16"
1
5
8"
1
5
8"
1
5
8"
3
3
8"
3
3
8"
3
3
8"
3
3
8"
3
1
8"
3
3
8"
4 Holes
3
4" Dia.
4 Holes
3
4" Dia.
4 Holes
3
4" Dia.
4
1
2"
1
5
8"
1
11
16"
1
5
8"
6"
4
1
2"
4 Holes
3
4" Dia.
6"
6"
8"
3"
6
1
2"
1
5
8"
1
11
16"
1
5
8"
8"
2 Holes
3
4" Dia.
2 Holes
3
4" Dia.
3
4" Dia.
6"
4
1
2"
6"
4
1
2"
6"
Fittings & Brackets
D-19
Metal Framing, Pipe Hangers and Accessories
Q205
Q202
Q254
For 1
1
4
" standard pipe.
Load 1,500 lbs.
TR294
Frictionless needle bearings.
Design load: 1,000 lbs.
Safety factor of 5.
TR292
Frictionless needle bearings.
Design load: 500 lbs.
Safety factor of 5.
Q253
2
3
4"
6"
1
13
16"
3
5
8"
5
3
8"
2
7
16"
1
1
4"
9
16" Dia.
3
1
2"
3
5
8"
2
7
16"
5
3
8"
2
1
8"
2
1
8"
4"
4"
9
16" Dia.
2
3
4"
6"
1
13
16"
. . . . . . . . . . . . . . . Standard Dimensions . . . . . . . . . . . . . . .
Hole Spacing:
13
16" From End
Hole Spacing: 1
7
8" Centers
Hole Size:
9
16" Diameter
Material: 1
5
8" Width
Material:
1
4" Thick
Q256
For 2" standard pipe.
Load 1,500 lbs.
Q255
For 2" standard pipe.
Load 1,500 lbs.
Special Application Fittings
Standard Finish – GoldGalv
®
, unless otherwise stated.
Fittings & Brackets
D-20
Metal Framing, Pipe Hangers and Accessories
S-201-L and R
R as shown — L opposite hand.
12 ga. steel. Design Uniform Load/lbs.
A-1,200 250
A-1,400 200
TS-272
Track Support
Requires
3
8
" x 2
1
2
" bolt
and nut (not included).
Design load: 1,000 lbs.
TS273
Track Support
For uses over channel splice. Requires
3
8
" x 2
1
2
" bolt and nut (not included).
Design load: 2,000 lbs.
2
1
8"
1"
3
1
2"
3
3
4"
3
3
4"
1
5
8"
1"
2
1
8"
1 Hole
9
16"
1 Hole
9
16"
2 Holes
7
16"
2 Holes
7
16"
6
1
8"
8
1
2"
1
5
8"
13
16"
4"
S205
Design Uniform Load/lbs.
A-1,200 650
A-1,400 500
1
5
8"
3
3
4"
4
3
8"
4"
10
1
2"
S204
Design Uniform Load/lbs.
A-1,200 650
A-1,400 500
S218
Design Uniform Load/lbs.
A-1,200 750
A-1,400 650
S217
Design Uniform Load/lbs.
A-1,200 750
A-1,400 650
1
5
8"
6"
3
1
4"
3
1
8"
14
1
2"
1
3
16"
6"
3
1
4"
3
1
8"
3
3
4"
1
5
8"
5
3
4"
12
1
2"
. . . . . . . . . . . . . . . Standard Dimensions . . . . . . . . . . . . . . .
Hole Spacing:
13
16" From End
Hole Spacing: 1
7
8" Centers
Hole Size:
9
16" Diameter
Material: 1
5
8" Width
Material:
1
4" Thick
AB STD.
CAT. NO.
(IN.) (IN.) CTN.
AN-270-1 2
3
8 610
AN-270-2 4
3
8 810
AN-270-3 6
3
8 10 10
AN-270-4 8
3
8 12 15
AN-270-5 10
3
8 14 10
A B C STD.
CAT. NO.
(IN.) (IN.) (IN.) CTN.
S201-L6 or R6 61
15
16 325
S201-L8 or R8 82
7
16 525
S201L 10 or R 10 10 2
15
16 75
S201-L12 or R12 12 3
7
16 35
S201-L14 or R14 14 3
15
16 45
S201-L16 or R16 16 4
7
16 515
S201-L18 or R18 18 4
15
16 65
S201-L20 or R20 20 5
7
16 710
Standard Finish – GoldGalv
®
, unless otherwise stated.
AN-270
13
16"
13
16"
A
2"
B
Special Application Fittings (continued)
1"
9
32" Dia.
7
16" Dia.
2"
A
C
B
C
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118

Superstrut SECA-B2-20 Specification

Type
Specification

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI