![](//vs1.manuzoid.com/store/data-gzf/0b9c5fef42095abfb3f28490c599b4e5/2/000933078.htmlex.zip/bg1.jpg)
2.94
74.57
MOUNTING
SCREWS 2X
Step 1:
Determine your desired location for installation and make a mark for the location.Make 2 marks where mounting screws will
be placed as shown below. Drill hole at each of the marks.
Drill holes for the desired location.
MOUNTING
Step 2:
Mount Assembly to desired location through screws provided.
WM-6D
INSTALLATION INSTRUCTIONS
No portion of this document or any artwork contained herein should reproduced in any way without the written conset of ALLIED BRASS INC.