MORLEY Tripler Owner's manual

Thanks for buying the George Lynch Tripler by Morley

This device is designed to route a single guitar signal to three output

sources. Two most common uses for the Tripler are routing one guitar

to three amps OR routing one guitar to two amps and a tuner.

Each channel is turned on/off via a footswitch for that channel. Each

LINES OR YOU WILL DAMAGE THE AMP AND/OR SPEAKER.

This product is proudly made in the U.S.A.

Sound Enhancement Products, Inc. 325 Cary Point Drive Cary IL 60013

www.morleypedals.com