Allied Brass 433G/24-ABR Installation guide

19.5

Cap

Shelf

Backplate

Screw

0.7

Step 1:

Determine your desired location for installation and make a mark for the location . Make 2 marks where mounting screws will

be placed as shown below. Make sure shelf is level when marking for location of installation.Drill hole at each end of the

marks.

Drill holes in Wall for Backplate Mounting

Attach Shelf to Backplate

Step 2:

Unscrew Caps.Then mount Backplates to desired location and screw them in placed.Then insert shelf into Backplates and

screw Caps.

433G-24

INSTALLATION INSTRUCTIONS

No portion of this document or any artwork contained herein should reproduced in any way without the written conset of ALLIED BRASS INC.