1.Slide the battery cover
off in the direction of the
arrow, and pull out the
battery connection terminals.
2.Install/replace two fresh,
non-rechargeable nine-volt
(9V) batteries.
3.Put the batteries back into
the adapter, and replace the
battery cover.
4.The battery installation/
replacement is complete.
NOTE:
1. Do not mix new and old batteries together.
2. Verify that the batteries are connected securely to the
connection terminals
3. Do not mix alkaline, carbon-zinc, nickel-cadmium,
lithium-ion, or other battery types.
4. Do not use rechargeable batteries.
BATTERY INSTALLATION/REPLACEMENT
POWER CABLE INSTALLATION
Extension cord AC Adapter Power cable
1. Connect the power cord from the
furniture to the extension cord
according to Image A.
2. Insert the other end of the extension
cord to the AC adapter according to
Image B.
3. Insert the power cable into
the AC adapter according
to Image C.
Image A Image B Image C
Power Cable Installation
/