ProLounger RCL43-AAA16-LT Installation guide

1.Slide the battery cover

off in the direction of the

arrow, and pull out the

battery connection terminals.

2.Install/replace two fresh,

non-rechargeable nine-volt

(9V) batteries.

3.Put the batteries back into

the adapter, and replace the

battery cover.

4.The battery installation/

replacement is complete.

NOTE:

1. Do not mix new and old batteries together.

2. Verify that the batteries are connected securely to the

connection terminals

3. Do not mix alkaline, carbon-zinc, nickel-cadmium,

lithium-ion, or other battery types.

4. Do not use rechargeable batteries.

BATTERY INSTALLATION/REPLACEMENT

POWER CABLE INSTALLATION

Extension cord AC Adapter Power cable

1. Connect the power cord from the

furniture to the extension cord

according to Image A.

2. Insert the other end of the extension

cord to the AC adapter according to

Image B.

3. Insert the power cable into

the AC adapter according

to Image C.

Image A Image B Image C

Power Cable Installation

This manual is also suitable for

Download PDF