Brandt BT8603ME Owner's manual

Category
Washing machines
Type
Owner's manual

The Brandt BT8603ME washing machine is designed for domestic use and offers various features to enhance your laundry experience. It has a maximum capacity of 6 kg and comes equipped with safety features to prevent water spillage and ensure safe operation. The machine provides a range of washing programs, including a 90°C cotton cycle for thorough cleaning. You can customize your wash settings by adjusting the temperature, spin speed, and selecting additional options such as pre-wash and delayed start.

The Brandt BT8603ME washing machine is designed for domestic use and offers various features to enhance your laundry experience. It has a maximum capacity of 6 kg and comes equipped with safety features to prevent water spillage and ensure safe operation. The machine provides a range of washing programs, including a 90°C cotton cycle for thorough cleaning. You can customize your wash settings by adjusting the temperature, spin speed, and selecting additional options such as pre-wash and delayed start.

MANUEL D’INSTRUCTION FR
INSTRUCTION MANUAL EN
MANUAL DE INSTRUCCIONES ES
GEBRAUCHSANWEISUNG DE
HANDLEIDING NL
Lave-linge
Washing machine
Lavadora
Waschmaschine
Wasmachine
15
EN
Dear Customer,
You have just purchased a BRANDT product and we thank you for your
trust.
We designed and manufactured this product with you, your lifestyle and
your needs in mind, in order to best meet your expectations. We have put
into it our expertise, our spirit of innovation and all the passion which has
driven us for over 60 years.
We make every effort to ensure our products better meet your require-
ments, and our Customer Relations Department is at your disposal and
will be happy to hear any questions or suggestions you may have.
You may also visit our website www.brandt.com
where you will find our
latest innovations, as well as useful and complementary information.
BRANDT is happy to assist you in your daily life and hopes you will fully
enjoy your purchase.
Important: Before switching on your appliance, please read
this user guide carefully in order to familiarise yourself more
quickly with its operation.
16
EN -
EN
This appliance has been designed exclusively for
domestic use for washing linen.
SAFETY
RECOMMENLED LOADS:
— The maximum capacity of the appliance is 6 kg.
The following instructions must be respected:
INSTALLATION:
— This appliance is designed to be used for domestic and similar
applications such as:
- kitchen areas for staff in shops, offices and other professional pre-
mises;
- farms;
- use by hotel, motel and other residential clients;
- B&B-type environments.
— The pressure of the water supply must be between 0.1 and 1 MPa
(1 and 10 bars).
— Do not use an extension, adapter, multi-socket or a timer plug.
— The electrical installation must be able to withstand the maximum
power indicated on the rating plate and the plug must be properly
grounded.
— Once your appliance has been installed, the plug must remain
accessible.
— Only use the hose and the new seals supplied with the
appliance.
— If the power cord is damaged, have it changed by the After Sales
Service or a qualified professional to avoid any risks.
— We recommend that the appliance is not placed onto a mat or car-
pet to avoid hampering the circulation of air at its base.
— If a problem occurs that you cannot solve (see page 25), do not
attempt to repair the machine yourself. Call the reseller's or the
manufacturer's technical service.
G
17
EN
SAFETY
(continued)
USE:
— This appliance may be used by children of 8 years or older and by
persons with limited physical, sensorial or mental capacities or
without experience or knowledge of it, provided that they are cor-
rectly supervised or if they are given instructions on the use of the
appliance in complete safety if the risks incurred are understood.
Children should be supervised to ensure that they do not play with
the appliance and prevent children of less than 3 years old from
playing with it, unless they are constantly supervised.
The device should not be cleaned or maintained by unsupervised children.
— Do not load linen that has been treated with stain removers, sol-
vents or inflammable products –straight after they have been treated
(risk of explosion)
— This washing machine is fitted with a safety device to prevent any
spillage of water.
— At the end of the cycle, ensure the water tap is switched off and
the appliance unplugged.
ENVIRONMENT
This washing machine has been designed to res-
pect the environment.
PROTECTING THE ENVIRONMENT
The dose of washing product depends on how dirty
the laundry is and the hardness of the water. Do not
exceed the dose recommended by the manufactu-
rer of the washing product.
This appliance’s packaging material is recyclable.
Help protect the environment by placing the packa-
ging into the municipal containers provided for this
purpose.
Your washing machine also contains many
recyclable materials, it features this logo to
remind you that used appliances must not
be mixed with other waste.
The appliance must therefore be recycled in com-
pliance with the European directive 2012/19/EU on
used electrical and electronic equipment.
Contact your town hall or your retailer for the used
appliance collection points closest to your home.
ENERGY SAVING
Only programme a prewash when it is absolutely
necessary. For linen that is not very or normally dirty,
a low temperature programme is sufficient.
18
EN
2 - USE
Once the linen has been put in, ensure that
the drum has been closed properly. Ensure
that the edge of the button is visible.
1 - INSTALLATION
gram are respected and especially that the connec-
tion is not air-tight: air must pass freely between the
drain hose and the drain to avoid used water from
flowing back up the hose into the machine and bad
smells being caused.
1.4 - LEVELLING THE MACHINE
(Diagram 1.4)
The appliance must be installed on a horizontal
floor. If required, and if it is equipped with adjusta-
ble feet at the front of the appliance, stabilise your
washing machine so that it is level. If it is fitted with
retractable castors, it may be moved by pulling the
lever underneath the appliance completely to the
left.
1.2 - CONNECTION TO THE WATER SUPPLY
(Diagram 1.2)
Connect the feed pipe with its new washers to the
coupling on the rear of the washing machine and to
a tap with a threaded Ø 20x27 endpiece.
1.3 - DRAINING
(Diagram 1.3)
Position the drain hose, fitted with the curved part,
ensuring that the instructions shown on the dia-
H
1.5 -
ELECTRICAL CONNECTION
(Diagram 1.1.1)
Ensure that the indications on the data plate of the
Appliance are respected.
1.6 - CLEANING BEFORE USE
Once installed, your washing machine must be clea-
ned by programming a cotton cycle at 90°C with
nothing inside and with half a dose of washing pow-
der.
RECOMMENDATIONS:
— Before inserting the linen, sort it by colour, how
dirty it is and the type of textile. Empty all pockets,
close zips, removes hooks from curtains, place
Small items of underwear in a mesh bag.
— Remove any loose buttons, pins and clips.
— Knot belts, and ties for aprons, etc.
2.1 - LOADING YOUR WASHING
(Diagram 2.1)
Operate the handle of the lid and open the drum
by pushing the button .
A
2.2 - WASHING PRODUCTS AND ADDITIVES
(Diagram 2.2)
The product drawer has 3 compartments :
pre-wash
(powder), wash (powder or liquid),
softener.
— Use detergents that are certified for domestic
washing machines.
— Do not use liquid detergents with the pre-wash
cycle and/or delayed start.
— Do not exceed the maximum level.
— Remove the 3 hose support clips, and place
E
1.1 - UNPACKING
(Diagram 1.1.2 to 1.1.4)
The following instructions must be respected :
— Remove the chocks from the lid and flaps of the
drum and open and close the drum carefully.
— Lift the washing machine and remove the
motor chock and base
(Diagram 1.1.2)
.
B
A
holes
(Diagram 1.1.3)
.
D
— Remove the strip and place the stoppers in the
C
the stoppers in the 3 holes (very important)
(Diagram 1.1.4).
F
19
EN
1 -
3 - PROGRAMMING
4
3.1 - THE CONTROL PANEL
1
2
On / Off
Start/Pause
Selecting the Programme
Options
Display
1
2
3
5
11
10
12
9
Degree of soiling
Selecting the spin speed
Delayed start
"Easy start" function light
Child safety indicator light
CLOSE-UP OF THE DISPLAY
5
7
6
8
Selecting the temperature
Child safety indicator light
20
S
TARTING THE APPLIANCE
Press the “On/Off” button if the machine is swit-
ched off. When using your washing machine for the
first time, the manufacturer's programme will
appear, and then your preferred programme and
options will be displayed automatically, thanks to
the "Easy start" function. The indicator is on. If
1
10
EN
3 - PROGRAMMING
(continued)
3.2 - PROGRAMMING A WASH CYCLE
DELAYED START OF A PROGRAMME
Select your programme.
Press the "Delayed start" key
(Diagram 3.2.6)
to delay the start of your programme hour by hour
until you reach the time you want (max 24h).
Confirm your cycle selection by pressing the
"Start/Pause" button .
Area of the display shows the time remaining until
the start of the programme via a countdown in
hours, then in minutes during the last hour.
9
2
this programme suits you, press "Start/Pause"
to start the programme.
Otherwise you can modify the programme by tur-
ning the selector . The led corresponding to the
selected programme lights up. The machine dis-
plays the most suitable temperature and spin speed
for the selected programme and the cycle duration.
If you wish, you can change the temperature by
pressing key successively.
(Diagram 3.2.1)
.
Nota : For a cold wash, change the temperature to
«0».
Using key , you may:
- modify the spin speed (automatic limit for certain
programmes)
(Diagram 3.2.2)
- choose drip dry
(Diagram 3.2.3)
. The cycle will end
by draining the washing machine and will not spin.
- or stop with the drum full
(Diagram 3.2.4).
You can select any options using keys and .
The led corresponding to your selection switches
on. A warning beep informs you of any options that
are not compatible with your programme.
Press "Start/Pause" to start your programme.
8
2
3
7
4
6
2
The door lock indicator lights up
(Diagram 3.2.5)
.
A few minutes after the cycle is launched, the dura-
tion is updated according to the quantity and type
of laundry in the machine.
12
21
3.2 - P
ROGRAMMING A WASH CYCLE
(continued)
ADDING OR REMOVING AN ITEM DURING THE
CYCLE
(impossible during spin)
If you need to add or remove items of clothing:
Press and hold the "Start/Pause" button to inter-
rupt the programme.
The time remaining flashes and the door lock indica-
tor goes out.
Insert or remove the linen.
The time taken to unlock the door depends
on the temperature inside the machine and
can last up to several minutes for safety reasons.
Press "Start/Pause" to restart the programme.
The countdown resumes.
Nota : If you have selected a delayed start, you can
open the drum at any time before the wash pro-
gramme starts.
CANCELLING A PROGRAMME
Press and hold the "On/Off" button .
All the lights go out.
You can do this at any time: during the cycle, pro-
gramming or during a pause.
Nota : In all cases, cancelling a programme means
that you have to re-programme everything from the
start again
(see paragraph 3.2)
and a partial emp-
tying is carried out.
END OF THE WASHING CYCLE
The display shows "End"
(Diagram 3.2.7)
and the
door lock indicator goes out.
You can programme a new cycle without having to
press the "On/Off" key .
This display is automatically switched off after a
maximum of 5 minutes in order to save energy in
standby mode.
Certain models are equipped with a function that
automatically places the drum opening at the top, at
the end of the cycle, to facilitate access to the laun-
dry (posistop). This operation may take up to 3
minutes which adds onto the wash cycle time.
Open the lid and remove the linen.
Press and hold the "On/Off" button to switch off
the washing machine.
2
1
1
2
12
12
1
CHILD SAFETY
Activate "Child safety" to lock your programme by
pressing buttons and at the same time.
6
7
Information:
In the event of a power cut, the cycle will automati-
cally restart from the point where it stopped, as
soon as the power returns.
EN
3 - PROGRAMMING
(continued)
Once this safety device is active, light , corres-
11
ponding to the ( ) symbol ,comes on
(Diagram
3.2.8)
.
Simultaneously press the same buttons again to
switch off the "Child safety" function.
22
EN
3 - PROGRAMMING
(continued)
PROGRAMME QUOTIDIEN OPTIA 39’
To wash a normal load of moderately dirty cotton or
mixed linen in 39 minutes with a perfect result. You
must add up to 3 minutes if your model is equipped
with the “Posistop” function.
PROGRAMME COTTON / TOWELS
For a load consisting of sponge, resistant white or
coloured cotton.
PROGRAMME COTTON ECO
To wash moderately dirty cotton textiles with opti-
mised energy and water use.
PROGRAMME COTTON Prewash
To remove earth, sand, blood... This sequence
includes a wash in clean water.
It is also necessary to put a detergent (wash-
ing powder only) in the prewash product
compartment
(Diagram 2.2)
.
PROGRAMME MIXED
For a linen load of mixed fibres.
PROGRAMME WOOLENS
Programme with tumble and spin speed adapted to
the nature of these textiles.
PROGRAMME FLASH 25 minutes
To wash a moderately dirty small cotton or mixed
linen load in 25 minutes. You must add up to 3
minutes if your model is equipped with the
“Posistop” function.
Important : For this programme, the doses
of detergent should be reduced by half.
SPORT PROGRAMME
For technical textiles. Wash designed to preserve
the elastic fibres contained in sportswear and not
slacken them.
JEANS PROGRAMME
Programme especially designed to reduce creases
and fading. Additional rinsing to remove all traces
of detergent (“Easy ironing” and “Dark colours”
options not removable).
39
SHIRT PROGRAMME
This programme is specially designed to wash six
moderately soiled shirts that have been worn for one
day in less than 40 minutes. The spin speed is adjus-
ted to limit wrinkling (“Easy ironing” option not remo-
vable).
HAND WASH PROGRAMME
This programme is specially designed for an ultra
gentle wash (swing wash) that respects even your
most delicate textile. It is advisable to turn your
clothes inside out before washing them.
RINSE/SPIN PROGRAMME
When this programme is selected, the "Sensitive
skin" option is activated automatically. Deactivate
this option for spin drying only.
SENSITIVE SKIN OPTION
Add an extra rinse. Ideal for people with delicate
skin.
EASY IRONING OPTION
Wash and spin dry speeds adapted to avoid crum-
pling of the linen.
DARK COLOURS OPTION
Enables your washing machine to take care of your
darks and prevent creases and traces of detergent.
DEGREE OF SOILING OPTION
Use this button to shorten or lengthen the wash
cycle between two levels that can be chosen by
pressing the button successively.
— Level 1 is for dirty laundry and increases the length
of the cycle by 15% on average
(Diagram 3.2.9)
.
— Level 2 is for laundry that needs refreshing and
reduces the length of the cycle by 40% on average
(Diagram 3.2.10)
.
Important: For this programme, the doses of
detergent should be reduced by half.
23
EN
Programmes table
Programmes
Temperature
(°C)
Maximum
weight of
dry clothes
Sensitive skin
Easy ironing
Dark colours
Soiling
Drip-dry
Full drum
stop
COTTON / TOWELS Cold - 90 6,0 kg
COTTON ECO 40 - 60 6,0 kg
COTTON PREWASH Cold - 60 6,0 kg
MIXED Cold - 60 2,5 kg
WOOLENS Cold - 40 1,5 kg
Special programmes
Daily OptiA 39’ Cold - 40 3,0 kg
Flash 25 minutes Cold - 40 2,5 kg
Sport Cold - 40 2,5 kg
Jeans Cold - 40 2,5 kg
Shirt Cold - 40 1,5 kg
Hand wash Cold - 30 1,0 kg
Additional programmes
Rinse / Spin - -
3 - PROGRAMMING
(continued)
FONCTION DRIP DRY ()
With very delicate laundry, this function empties the
washing machine without spin drying.
FONCTION FULL DRUM STOP ()
This function enables you to remove the washing
from your machine before the spin phase or to
delay this phase with you washing remaining in
water to prevent creasing.
When the machine has stopped with a full drum,
the " " icon flashes and the remaining time indi-
cator shows ”00:00”.
(Diagram 3.2.11)
.
Then:
If you want to drain and spin, select a spin speed
suitable for the type of laundry.
Or, if you want to drain only, select the "drip dry"
function (spin speed ” ”).
The programme will stop automatically.
39
24
EN
3 - PROGRAMMING
(continued)
-
Opti 4
You washing machine can automatically optimise
the length of the wash cycle and the water and
energy consumption of every wash.
- Adjustment to the quantity of laundry:
Washing 1kg of laundry is not the same as washing
a full load, which is the reason why your washing
machine is equipped with sensors that detect the
quantity of laundry in the drum and automatically
calculate the right levels of water and energy requi-
red to produce a perfect wash.
- Adjustment to the hardness of the water:
The hardness of the water in your mains supply
affects the wash and rinse performances of your
appliance, which is the reason why your washing
machine automatically adapts the tumble time and
the number of rinses to produce a perfect result.
The water hardness is adjusted when you use your
washing machine for the first time (see special
insert).
- Adjustment to the degree of soiling:
The length and the intensity of the wash depend on
how dirty your laundry is, which is the reason why
your appliance can vary the length of the wash
cycle by up to 40% according to the selected set-
tings (see page 23).
- Adjustment to the type of textile:
Cotton shirts and cashmere pullovers do not
demand the same wash, which is the reason why
your washing machine adapts its tumble speed to
each type of textile.
For your information : The time shown on the wash-
ing machine when you select a programme corres-
ponds to the time for an average load. This time is
adjusted, once the appliance has taken its measu-
rements and then throughout the programme,
according to any unexpected events (too much
washing powder, an unbalanced load when spin-
ning, etc.). You must add up to 3 minutes if your
model is equipped with the “Posistop” function.
- Easy start
Your washing machine memorises your habits.
Every time a programme starts, the machine
records the options that you use most frequently,
and proposes these same options as soon as you
switch on the appliance.
4 - REGULAR CARE
puyll it towards you. Remove the siphon ,
sepa-
rate the drawer from the trim .
B
C
D
— Rinse everything under the tap.
— Refit all of the parts of the drawer, then fit it back
under the lid of the machine.
4.1 - AVOIDING BAD SMELLS
Respect the installation instructions for the drain
hose described in paragraph 1.3, leave the lid open
after the cycle has finished. Complete an empty
cycle with a washing agent at 60°C or 90°C once a
month.
4.2 - PRODUCT DRAWER
(Diagram 4.1)
— Release the drawer by pressing the Bumps ,
A
pushing a pen into the hole and push it to the
right.
B
4.3 - PUMP FILTER
(Diagram 4.2)
Release the part at the bottom of the drum by
A
Turn the drum towards the front.
Remove the pump filter , remove any objects
that may be inside and rinse everything under the
tap.
Refit both parts and .
C
C
A
Push the part to the left until it clicks into place.
4.4 - OUTSIDE PANELS
Do not use abrasive products or scourers. Use
liquid soap. Dry with a soft cloth.
A
25
1 -
EN
5 - PROBLEMS
Incidents may arise when using your washing machine:
If the screen shows one of the following errors and an alarm beeps, before calling Customer Service:
check whether:
- The water tap is
open.
5.1
check whether:
- T
he lid is not clo-
sed correctly.
- The drump is
block
5.2
check whether:
-
The pump filter is
clogged ; clean the
filter
(paragraph 4.3).
5.3
Problems: Causes / Remedies:
The washing machine will not start: - The appliance is not plugged in or there is a power cut.
- You haven't pressed the "Start/Pause" button
.
- You have programmed a delayed start.
- See problems 5.1 and 5.2
The linen is not or not sufficiently spun: - You have selected a programme without spin drying or with
limited spin drying.
- The spin safety system has detected poor distribution of the
washing in the drum : unfold the linen and programme another
spin cycle.
- Check the height of the curved drain part
(Diagram 1.3)
.
H
A puddle of water forms on the floor: First remove the plug from the socket and turn off the water
supply.
- Check that the seals are fitted and the connectors are tigh-
tened
(Diagram 1.2)
.
- Check the curved part is positioned correctly
(Diagram
1.3)
.
G
H
Strong vibrations when spin drying: - The washing machine has not been released correctly
(Diagram 1.1.3)
.
- The floor is not level
(paragraph 1.4)
.
The machine does not drain: - You have programmed "Full drum stop".
- The drain hose is bent or squashed
(Diagram 1.3)
.
- See problem 5.3.
The lid does not open : - The programme has not yet finished.
-
Wait until the temperature inside the machine drops.
The drum is blocked : - If you have access, check that a small item of linen is not trap-
ped between the drum and the tank, by removing part
from the bottom of the drum
(Diagram 4.2)
.
- See problem 5.2.
A
The drum doors open very slowly (on
machines fitted with gently opening doors) :
- Your machine has not operated for a long time.
- It is located in too cold a position.
- Detergent residue (powder) is blocking the hinges.
- in all cases, everything returns to normal after the doors have
opened initially.
All the lights are off at the end of the pro-
gramme:
- All the lights automatically switch off no more than 5 minutes
after the end of the programme in order to save energy. Press
any button to restart the display.
Here are a few points to check:
Note on operation - this is not an incident :
The programme time
decreases or increases
during the wash
This is not a fault. The length of time displayed at the start of the programme is
updated according to the load in the machine (automatic weighing). This gua-
rantees perfect washing results and water and energy consumption appropriate
to the load. This is normal. The spin safety and anti-foam systems may extend
the initial programme time displayed.
26
EN
This indicates that the annual electrical consumption is reduced by 10% compared to a machine
with its consumption situated at the beginning of the A+++ class, according to the European
regulation 1061/2010/EU.
+++
-10 %
Programmes Temperature
Capacity
(kg)
Energy use
(kWh/cycle)
Time
(minutes)
Water
consumption
(L/cycle)
Remaining mois-
ture content D
in %
Cotton/Towels
40°C 3.5 0.45 106 40
1000 / 1100 rpm
54 D < 63
1200 / 1300 rpm
45 D < 54
60°C 3.5 0.90 110 40
Cotton Eco
60°c60°c
6.0 0.79 205 49
60°c60°c
3.0 0.50 123 32
40°c40°c
3.0 0.44 120 32
Mixed
40°C 2.5 0.44 81 46
Quotidien OptiA39’
40°C 3.0 0.51 39 47
Flash 25 minutes
30°C 2.5 0.21 25 38
Woolens
30°C 1.0 0.20 32 44
45 D < 50
6 -
INFORMATION CONCERNING THE EU REGULATIONS 1015/2010
In accordance with EU regulation 1015/2010, below you will find additional product information. The purpose of
this information is to provide details on the energy-saving directives to which all appliances sold in the EU must
conform.
PRODUCT INFORMATION
These programmes are suitable for cleaning averagely soiled cotton cloth and are more efficient in terms of both
energy and water consumption.
TEST PROGRAMMES ACCORDING TO DELEGATED REGULATION (UE) N°1061/2010
- Standard cotton programme at 60°C : Cotton ECO - - no option - max spin.
60°c60°c
- Standard cotton programme at 40°C : Cotton ECO - - no option - max spin.
40°c40°c
Off-mode:
0,49 W
'Left-on' mode:
0,49 W
Electricity consumption in on and 'left-on' modes
These values are guides. They may vary depending on ambient conditions.
For energy-saving purposes, the actual washing temperature can vary from the temperature of the selected pro-
gramme.
27
EN
6 -
INFORMATION CONCERNING THE EU REGULATIONS 1015/2010
(continued)
NOTES
Any work on your appliance must be carried out by a qualified professional who is a dealer of the brand. When
you call, so that we can handle your case efficiently, make sure you have the full references of your appliance
(commercial reference, service reference, serial number). This information is on the ID plate
(Diagram 1.1.1)
.
Original parts:
When work is required, request exclusively original certified spare parts.
For information:
or contact your seller directly.
DPN
1 -
INTERVENTIONS / EXPORT CONSUMER RELATIONS
WASHING YOUR CLOTHES CORRECTLY
Care labels on items of clothing specify appropriate detergents, temperatures and settings.
White cotton
laundry
Coloured linen or
cotton laundry
Type of cloth Programme Detergent
Detergent with a bleaching product
Detergent for coloured laundry
without a bleaching product
Colour/delicate detergent
Detergent for delicate laundry
Detergent for woollen items
Cotton
Temp.
60°C
Synthetic items
Synthetic items
Temp.
60°C
Delicate fabrics
Hand wash
Temp.
30°C
Wool
Woolens
Temp.
30°C
Cotton
Temp.
90°C
68
1 -1
13mm
1
2
2
D
CLIC
12
12
90cm
maxi
65cm
mini
/
o 34mm
mini
E
F
1.1.1 1.1.2
1.1.3
1.1.4 1.2
1.3 1.4
A
B
C
C
D
G
H
69
1 -2
CLAC
2.1
A
30
70
100
ml
ml
ml
50
100
150
40
70
100
200
2.2
°C
h : min
rpm
3.2.1 3.2.2
°C
h : min
rpm
°C
h : min
rpm
3.2.3 3.2.4
°C
h : min
rpm
3
°C
h : min
rpm
3.2.5 3.2.6
°C
h : min
rpm
70
3.2.11
°C
h : min
rpm
3
3.2.7
°C
h : min
rpm
°C
h : min
rpm
3.2.8
3.2.9
°C
h : min
rpm
°C
h : min
rpm
3.2.10
71
4
1
2
1
2
2
CLIC
1
A
B
C
4.2
1
1
2
A
B
C
D
4.1
TW2G01302-00 03/18
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19

Brandt BT8603ME Owner's manual

Category
Washing machines
Type
Owner's manual

The Brandt BT8603ME washing machine is designed for domestic use and offers various features to enhance your laundry experience. It has a maximum capacity of 6 kg and comes equipped with safety features to prevent water spillage and ensure safe operation. The machine provides a range of washing programs, including a 90°C cotton cycle for thorough cleaning. You can customize your wash settings by adjusting the temperature, spin speed, and selecting additional options such as pre-wash and delayed start.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI