Pelco POE4ATN 4-Port PoE Midspan Quick start guide

Brand: Pelco

Model: POE4ATN 4-Port PoE Midspan

Type: Quick start guide

POE4ATN Midspan Installation

Setting up your new Pelco Midspan is easy. With plug and play technology, the Midspan is fully functional upon delivery. There are no additional firmware downloads or

need for additional hardware. Review all important safety instructions and thoroughly familiarize yourself with the information in this Quick Start Guide prior to

installation and operation of the Midspan.

1. Plug the AC cord into the rear of the Midspan. The AC power connector is C14 and requires a power cable with a C13 line socket. The LEDs will illuminate in a

specific sequence indicating power-up. For more information regarding this step, refer to the user manual located on www.pelco.com.

2. NOTE: In following steps, use Category 5 (CAT5) or better patch cables with RJ-45 connectors for all network connections.

After the Midspan is powered up, connect one of the ports on the network switch to one of the ‘Data’ ports on the Midspan; this makes one data connection.

3. Connect the ‘Data & Power’ port, directly above the ‘Data’ port used, to a PoE compatible end device.

4. Repeat steps 2 and 3 for each end device being connected to the network. A single data connection between the network switch and Midspan is not sufficient for

multiple device use.

Getting Started With the 4-Port Midspan User Interface

Download the latest version of the User Manual for complete getting started and reference information for the graphical user interface.

Installation/User Manual Download

Download the product Installation/User Manual specific to your product.

1. Go to www.pelco.com.

2. Select ‘Product Documentation’ from the Popular Links section.

3. Enter the product number in the search box; search to obtain the product page.

4. Select the ‘Downloads’ tab and select the document for download.

NIC Management Port from computer

Midspan Data IN from network switch

Midspan Data/Power OUT to end device

Installation

4-Port PoE Midspan Quick Start Guide

C3943M (9/13)

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication are trademarks of Pelco, Inc. or its affiliates.

ONVIF and the ONVIF logo are trademarks of ONVIF Inc. All other product names and services are the property of their respective companies.

Product specifications and availability are subject to change without notice.

Pelco, Inc. 625 W. Alluvial Ave., Fresno, CA 93711 United States

USA & Canada Tel (800) 289-9100 Fax (800) 289-9150

International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120

www.pelco.com