DX8100 SITE TREE REFERENCE
DX8100_SITE_TREE_REF
Pelco and the Pelco logo are registered trademarks of Pelco.
Information subject to change without notification.
Copyright 2006, Pelco. All rights reserved.
©
World Headquarters
3500 Pelco Way, Clovis, California 93612 USA
USA & Canada Tel: 866/587-2503 Fax: 800/289-9150
International Tel: 1-559/348-5504 Fax: 1-559/348-1120
www.pelco.com
DX8100 SITE TREE REFERENCE
Item Part Description
Name Site: Expands and collapses the DX8100 site. Right-clicking the site name opens a shortcut menu that provides the
following commands:
• User Log-In: Clicking User Log-In opens the User Log-In dialog box, where you enter your user name and password
to log into the DX8100 site.
• User Log-Out: Clicking logs you out of the DX8100 site.
• Connect
• Disconnect
Camera: Expands and collapses the Camera tree.
Channel information: Displays icons that represent the configuration for the camera:
• Recording mode
• Recording resolution
• Recording frame rate
• Recording Image quality
Alarm: Expands and collapses the Alarm tree.
ATM/POS: Expands and collapses the ATM/POS tree.
Relay: Expands and collapses the Relay tree. Right-clicking a relay opens a shortcut menu that provides the following
commands:
• ON: Allows you to turn the relay on.
• OFF: Allows you to turn the relay off.
Remote site: Expands and collapses the remote DX8100 site. Right-clicking the remote site name opens a shortcut
menu that provides the following commands:
• User Log-In: Clicking User Log-In opens the User Log-In dialog box, where you enter your user name and password
to log into the remote DX8100 site.
• User Log-Out: Clicking logs you out of the remote DX8100 site.
• Connect: Allows you to connect to the remote site.
• Disconnect: Allows you to disconnect from the remote site.
/