Hoover HLS 1862 WDKM User manual

Instruction Manual

UPRIGHT LARDER

Inglese

Thank you for purchasing this product.

Before using your refrigerator, please carefully read this instruction manual in order to maximize its

performance. Store all documentation for subsequent use or for other owners. This product is intended solely

for household use or similar applications such as:

- the kitchen area for personnel in shops, offices and other working environments

- on farms, by clientele of hotels, motels and other environments of a residential type

- at bed and breakfasts (B & B)

- for catering services and similar applications not for retail sale.

This appliance must be used only for purposes of storage of food, any other use is considered dangerous and

the manufacturer will not be responsible for any omissions. Also, it is recommended that you take note of the

warranty conditions. Please, to obtain the best possible performance and trouble free operation from your

appliance it is very important to carefully read these instructions. Failure to observe these instructions may

invalidate your right to free service during the guarantee period.

SAFETY INFORMATION

This guide contains many important safety information.

Please, we suggest you keep these instructions in a safe

place for easy reference and a good experience with the

appliance.

The refrigerator contains a refrigerant gas (R600a:

isobutane) and insulating gas (cyclopentane), with high

compatibility with the environment, that are, however,

inflammable.

Caution: risk of fire

If the refrigerant circuit should be damaged:

 Avoid opening flames and sources of ignition.

Thoroughly ventilate the room in which the appliance is

situated.

WARNING!

 Care must be taken while cleaning/carrying the appliance

to avoid touching the condenser metal wires at the back

of the appliance, as you might injure your fingers and

hands or damage your product.

 This appliance is not designed for stacking with any other

appliance. Do not attempt to sit or stand on top of your

appliance as it is not designed for such use. You could

injure yourself or damage the appliance.

 Make sure that mains cable is not caught under the

appliance during and after carrying/moving the

appliance, to avoid the mains cable becoming cut or

damaged.

 When positioning your appliance take care not to

damage your flooring, pipes, wall coverings etc. Do not

move the appliance by pulling by the lid or handle. Do

not allow children to play with the appliance or tamper

with the controls. Our company declines to accept any

liability should the instructions not be followed.

 Do not install the appliance in humid, oily or dusty

places, nor expose it to direct sunlight and to water.

 Do not install the appliance near heaters or inflammable

materials.

 If there is a power failure do not open the lid. Frozen food

should not be affected if the failure lasts for less than 20

hours. If the failure is longer, then the food should be

checked and eaten immediately or cooked and then

refrozen.

 If you find that the lid of the chest freezer is difficult to

open just after you have closed it, don’t worry. This is

due to the pressure difference which will equalize and

allow the lid to be opened normally after a few minutes.

 Do not connect the appliance to the electricity supply

until all packing and transit protectors have been

removed.

 Leave to stand for at least 4 hours before switching on to

allow compressor oil to settle if transported horizontally.

 This freezer must only be used for its intended purpose

(i.e. storing and freezing of edible foodstuff).

 Do not store medicine or research materials in the Wine

Coolers. When the material that requires a strict control

of storage temperatures is to be stored, it is possible that

it will deteriorate or an uncontrolled reaction may occur

that can cause risks.

 Before performing any operation, unplug the power cord

from the power socket.

 On delivery, check to make sure that the product is not

damaged and that all the parts and accessories are in

perfect condition.

 If in the refrigeration system a leak is noted, do not touch

the wall outlet and do not use open flames. Open the

window and let air into the room. Then call a service

center to ask for repair.

 Do not use extension cords or adapters.

 Do not excessively pull or fold the power cord or touch

the plug with wet hands.

 Do not damage the plug and/or the power cord; this

could cause electrical shocks or fires.

 If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified

person in order to avoid a hazard.

 Do not place or store inflammable and highly volatile

materials such as ether, petrol, LPG, propane gas,

aerosol spray cans, adhesives, pure alcohol, etc. These

materials may cause an explosion.

 Do not use or store inflammable sprays, such as spray

paint, near the Wine Coolers. It could cause an explosion

or fire.

 Do not place objects and/or containers filled with water

on the top of the appliance.

 We do not recommend the use of extension leads and

multi-way adapters.

 Do not dispose of the appliance on a fire. Take care not

to damage, the cooling circuit/pipes of the appliance in

transportation and in use. In case of damage do not

expose the appliance to fire, potential ignition source and

immediately ventilate the room where the appliance is

situated.

 The refrigeration system positioned behind and inside

the Wine Coolers contains refrigerant. Therefore, avoid

damaging the tubes.

 Do not use electrical appliances inside the food storage

compartments of the appliance, unless they are of the

type recommended by the manufacturer.

 Do not damage the refrigerant circuit.

 Do not use mechanical devices or other means to

accelerate the defrosting process, other than those

recommended by the manufacturer.

 Do not use electrical appliances inside the food storage

compartments, unless they are of the type recommended

by the manufacturer.

 Do not touch internal cooling elements, especially with

wet hands, to avoid cracks or injuries.

 Maintain the ventilation openings in the appliance

enclosure or in the built-in structure, free of obstruction.

 Do not use pointed or sharp-edged objects such as

knives or forks to remove the frost.

 Never use hairdryers, electrical heaters or other such

electrical appliances for defrosting.

 Do not scrape with a knife or sharp object to remove frost

or ice that occurs. With these, the refrigerant circuit can

be damaged, the spill from which can cause a fire or

damage your eyes.

 Do not use mechanical devices or other equipment to

hasten the defrosting process.

 Absolutely avoid the use of open flame or electrical

equipment, such as heaters, steam cleaners, candles, oil

lamps and the like in order to speed up the defrosting

phase.

 Never use water wash the compressor position, wipe it

with a dry cloth thoroughly after cleaning to prevent rust.

 It is recommended to keep the plug clean, any excessive

dust residues on the plug can be the cause fire.

 The product is designed and built for domestic household

use only.

 The guarantee will be void if the product is installed or

used in commercial or non-residential domestic

household premises.

 The product must be correctly installed, located and

operated in accordance with the instructions contained in

the User Instructions Booklet provided.

 The guarantee is applicable only to new products and is

not transferable if the product is resold.

 Our company disclaims any liability for incidental or

consequential damages.

 The guarantee does not in any way diminish your

statutory or legal rights.

 Do not perform repairs on this Wine Coolers. All

interventions must be performed solely by qualified

personnel.

SAFETY CHILDREN!

 If you are discarding an old product with a lock or latch

fitted to the door, ensure that it is left in a safe condition

to prevent the entrapment of children.

 This appliance can be used by children aged from 8

years and above and by persons with reduced physical,

sensory or mental capabilities or with a lack of

experience and knowledge; provided that they have been

given adequate supervision or instruction concerning

how to use the appliance in a safe way and understand

the hazards involved.

 Children should not play with the appliance. Cleaning

and user maintenance should not be made by children

without supervision.

1

P

r

ope

r

u

s

e

o

f

r

e

f

r

i

ge

r

a

t

o

r

s

1.1

P

l

a

c

e

m

en

t

Before use, remove all packing materials, including bottom

cushions, foam pads and tapes inside of the refrigerator;

Tear off the protective film on the doors and the refrigerator body.

Keep away from heat and avoid direct sunlight.

Do not

place the freezer in moist or watery places to

prevent rust

or reduction of insulating effect.

Do not spray or wash the refrigerator; do not put the refrigerator in

moist places easy to be splashed with water so as not to affect

the

electrical insulation properties of the refrigerator.

The refrigerator is placed in a well-ventilated indoor place;

the ground shall be

flat,

and sturdy (rotate

left

or right

to

adjust the wheel for level ing if unstable).

The top space of the refrigerator shall be greater than 30cm,

and

The refrigerator should be placed against a wall with a free

distance

more than 10cm to facilitate the opening and

closing and heat dissipation.

6

1.2

Door handle installation

Precautions before installation:

Information in the Instruction Manual is only for reference. The physical product may differ.

Before installation of accessories, please ensure that the refrigerator is disconnected from

power.Before installation of the door handle,

precautions shall be taken to prevent fall of the handle from causing any personal injury.

List of tools to be provided by the user

Cross screwdriver

①insert pin

② screw ③handle

@)

nut cap

1） Remove the insert pin ①.

ф

2)

Adjust the handle ③ to the installing hole and tighten screw ②.

®

②

7

3)

C

o

v

e

r

t

he

nu

t

c

ap

④

o

f

hand

l

e

ho

l

e

.

④

（

T

he

p

i

c

t

u

r

e

abo

v

e

i

s

on

l

y

f

o

r

e

f

e

r

en

c

e

.

T

he

a

c

t

ua

l

c

on

f

i

gu

r

a

t

i

on

w

ill l

depend

on

t

he

ph

ys

i

c

a

l

p

r

odu

c

t

o

r

s

t

a

t

e

m

en

t

b

y

t

he

d

i

s

t

r

i

bu

t

o

r

）

8

1.3

Leveling feet

Precautions before installation:

Information in the Instruction Manual is only for reference. The physical product may differ. Before

installation of accessories, please ensure that the refrigerator is disconnected from power. Before

adjusting the leveling feet, precautions shall be taken to prevent any personal injury.

1)

Schematic diagram of the leveling feet

L

н

（The picture above is only for reference. The actual configuration will depend on the

physical product or statement by the distributor）

2)

Adjusting procedures:

a.

Turn the feet clockwise to raise the refrigerator;

b.

Turn the feet counterclockwise to lower the refrigerator;

c.

Adjust the right and left feet based on the procedures above to a horizontal level.

9

1.4

D

oo

r

R

i

gh

t

-

Le

ft

C

hange

P

r

e

c

au

t

i

on

s

be

f

o

r

e

i

n

s

t

a

ll

a

t

i

on

:

I

n

f

o

r

m

a

t

i

on

i

n

t

he

I

n

s

t

r

u

c

t

i

on

M

anua

l

i

s

on

l

y

f

o

r

e

f

e

r

en

c

e

.

T

he

ph

ys

i

c

a

l

p

r

odu

c

t

m

a

y

d

i

ff

e

r

.

B

e

f

o

r

e

C

hange

t

he

doo

r

,

i

t

s

ha

ll

be

en

s

u

r

ed

t

ha

t

he

r

e

f

r

i

ge

r

a

t

o

r

i

s

d

i

sc

onne

c

t

ed

f

r

o

m

po

w

e

r

.

B

e

f

o

r

e

i

n

s

t

a

ll

a

t

i

on

o

f

t

he

doo

r

hand

l

e

,

p

r

e

c

au

t

i

on

s s

ha

ll

be

t

a

k

en

t

o

p

r

e

v

en

t

f

a

ll

o

f

t

he

hand

l

e

f

r

o

m

c

au

s

i

ng

an

y

pe

r

s

ona

l

i

n

j

u

r

y

.

1）

R

e

m

o

v

e

r

i

gh

t

uppe

r

h

i

nge

c

o

v

e

r

p

l

a

t

e ①，u

ppe

r

c

ap

c

o

v

e

r

p

l

a

t

e

②

,

and

l

e

ft

h

i

nge

c

o

v

e

r

p

l

a

t

e

③

.

10

L

i

s

t

o

f

t

oo

l

s

t

o

be

p

r

o

v

i

ded

b

y

t

he

u

s

e

r

C

r

o

ss

sc

r

e

w

d

r

i

v

e

r

5

/

16

″

s

o

ck

e

t

and

r

a

t

c

he

t

①

③

②

2）

P

u

ll

o

ff

t

he

s

i

gn a

l

li

ne

o

f

t

he

doo

r

bod

y

and

u

s

e

s

o

ck

e

t

and

r

a

t

c

he

t

r

e

m

o

v

e

t

he

sc

r

e

w

o

f

uppe

r

h

i

nge

.

R

e

m

o

v

e

t

he

uppe

r

h

i

nge

sc

r

e

w

s

i

gna

l

li

ne

3）

R

e

m

o

v

e

t

he

doo

r

bod

y

and

t

a

k

e

o

ff

t

he

r

i

gh

t

h

i

nge

.

11

4

)

T

u

r

n

o

v

e

r

t

he

l

o

w

e

r

h

i

nge

,

i

n

s

t

a

lll

a

t

i

on

s

ha

f

t

on

t

he

o

t

he

r

s

i

de

o

f

h

i

nge

(

F

i

g

.

a

)

and

i

n

s

t

a

l l

t

he

ad

j

u

s

t

ed

l

o

w

e

r

h

i

nge

on

t

he

l

e

ft

s

i

de

o

f

r

e

f

r

i

ge

r

a

t

o

r

(

F

i

g

.

b

)

（a）

（b）

12

5

）

I

n

s

t

all

doo

r

bod

y

,

w

i

t

h doo

r

bod

y

s

i

gn a

li

ng

c

ab

l

e

s

c

hanged

f

r

o

m

t

he

r

i

gh

t

o

t T

he

l

e

ft;

i

n

s

e

r

t

e

r

m

i

na

l

;

m

oun

t

uppe

r

h

i

nge

(

F

i

g

.

a

)

;

An

d p

l

a

c

e

l

e

ft

uppe

r

h

i

nge

c

o

v

e

r

p

l

a

t

e

①

，

u

ppe

r

c

ap

c

o

v

e

r

p

l

a

t

e

②

,

an

d

r

i

gh

t

h

i

nge

c

o

v

e

r

p

l

ate

③

(

F

i

g

.

b

)

（a）

③

①

②

（b）

（

T

he

p

i

c

t

u

r

e

abo

v

e

i

s

on

l

y

f

o

r

e

f

e

r

en

c

e

.

T

he

a

c

t

ua

l

c

on

f

i

gu

r

a

t

i

on

w

ilL l

depend

on

t

he

ph

ys

i

c

a

l

p

r

odu

c

t

o

r

s

t

a

t

e

m

en

t

b

y

t

he

d

i

s

t

r

i

bu

t

o

r

）

13

1.5

Connecting for refrigerator and freezer cabinets

1) Put two cabinets together with only 10mm gap, Fix the

connecting hinge to the place as shown in the picture.

2) Fit the lower connecting hinge at the bottom of two cabinets.

3) Put the bar inside the gap between two cabinets, The connecting Step finished"

( The picture above is only for reference. The actual configuration will depend оп

the physical product or statement bу the distributor)

14

1.6

Starting

Before initial start, keep the refrigerator still for half an hour

before

connecting it to power supply.

Before putting any food in your new refrigerator, please allow it to run

for 2 - 3 hours or during the summer for 4 hours or more to ensure it has

reached

the proper temperature

.

Allow enough space for convenient opening of the doors and drawers or

statement by the distributor

.

1.7

Energy saving tips

The appliance should be located in the coolest area of the room, away from heat producing

appliances or heating ducts, and out of the direct sunlight.

Let hot foods cool to room temperature before placing in the appliance. Overloading the

appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality, or

spoil.

Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This

cuts down on frost build-up inside the appliance.

Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners

interfere with cold air circulation, making the appliance less efficient.

Organize and label food to reduce door openings and extended searches. Remove as many

items as

needed at one time, and close the door as soon as possible.

15

597mm

998.6mm

566.7mm

1045.4mm

2

Structure and functions

2.1

K

e

y c

o

m

ponen

t

s

G

l

a

ss

s

he

l

f

T

r

a

y

upon

t

he

doo

r

L

E

D

li

gh

t

w

a

t

e

r

d

i

s

pen

s

e

r

G

l

a

ss

s

he

l

f

T

r

a

y

upon

t

he

doo

r

T

r

a

y

be

l

o

w

t

he

doo

r

B

i

g

f

r

u

i

t

and

v

ege

t

ab

l

e

bo

x

（

T

he

p

i

c

t

u

r

e

abo

v

e

i

s

on

l

y

f

o

r

e

f

e

r

en

c

e

.

T

he

a

c

t

ua

l

c

on

f

i

gu

r

a

t

i

on

w

il l

depend

on

t

he

ph

ys

i

c

a

l

p

r

odu

c

t

o

r

s

t

a

t

e

m

en

t

b

y

t

he

d

i

s

t

r

i

bu

t

o

r

）

Refrigerating chamber

The Refrigerating Chamber is suitable for storage of a variety of fruits, vegetables, beverages and

other food

consumped in the short term.

Cooking foods shall not be put in the refrigerating chamber until cooled to room temperature.

Foods are

recommended to be sealed up before putting into the refrigerator.

The glass shelves can be adjusted up or down for a reasonable amount of storage space and easy use

.

N

o

t

e

:

S

t

o

r

age o

f

t

oo

m

u

c

h

f

ood du

r

i

ng ope

r

a

t

i

on a

ft

e

r

t

he

i

n

i

t

i

a

l

c

onne

c

t

i

on

t

o po

w

e

r

m

a

y

ad

v

e

r

s

e

l

y

a

ff

e

c

t

he

f

r

ee

z

i

ng e

ff

e

c

t

o

f

t

he

r

e

f

r

i

ge

r

a

t

o

r

.

F

ood

s

t

o

r

ed

S

ha

ll

no

t

b

l

o

ck

t

he a

i

r

ou

t

l

e

t;

o

r

o

t

he

r

w

i

s

e

t

he

f

r

ee

z

i

ng

e

ff

e

c

t

w

ill

a

l

s

o be ad

v

e

r

s

e

l

y

a

ff

e

c

t

ed

.

16

2.2

Functions

A

1) Key

（

The picture above is only for reference. The actual configuration will depend on

the

physical product or statement by the distributor

）

A.SET: Temp setting key 2)Display

screen

① Temp 1

② Temp 2

③ Temp 3

④ Temp 4

⑤ Temp 5

⑥

Super

3)Display

For the first power-on, the display screen (including the key light) will be displayed in full for 3s, and then the gear in the

middle displays the state of running

Display of normal running

On the occurrence of a failure, the corresponding LED light will give a combined display of failure code

(loop display),Where there is no failure, the LED light will display the current running gear of the refrigerator.

4)Temp

setting

The Temp will be changed once every time when you press the key SET. Then, the refrigerator will run under the

setting value after 15s.

5)Fast cool function

Enter: Circulating modulation rapid cooling mode

Operate: Indicator of rapid cooling lights up, and the refrigerator operates at 2

℃

.

Operate 150min under the rapid cooling mode

Temperature adjustment can exit from the rapid cooling mode

Temp 1 Temp 2 Temp 3 Temp 4 Temp 5

6) Storage upon power failure

In case of power failure, the instant working state will be locked and maintained until re-electrification.

17

Page is loading ...

Hoover HLS 1862 WDKM User manual

Related papers

Other documents