Sharper Image 207706 Motion Activated Garage Light User manual

Type
User manual

This manual is also suitable for

• 8000 Lumens
• Voltage: 120V
• Power: 80W
• Color temperature: 6500K
• CRI: 80
• Material: Aluminum and ABS
• Lamp holder: E26
• Life span: 50,000hrs
• ETL Certified
FEATURES
1. The light will switch to sensor
mode when power is on. Sensor
function: when motion is detected
within 15 feet, the light will turn on
for 30 seconds. When no motion is
detected, the light will turn off in 30
seconds.
2. Ultra Bright and durable LEDs
3. Wide-angle design, each wing
90° adjustable, which gives a
perfect light distribution curve
according to your application and
makes the light cover a 360° area.
4. High-temperature resistant,
corrosion resistant
5. Long life span
6. Quick and easy to install, no tools
required
WARNING
Read this manual before use.
Failure to do so can cause risk of injury.
SAVE THIS MANUAL.
SPECIFICATION
MOTION ACTIVATED GARAGE LIGHT
207706
WIDE RANGE OF APPLICATIONS
INSTALLATION STEPS
1. Screw the light into the E26 holder.
2. Make sure light bulb is tight to avoid injury. Do not over tighten.
3. Adjust suitable lighting angle by moving the wing. Each wing 90° adjustable, see below.
≥90° Adjustable angle
The SHARPER IMAGE® name and logo are registered trademarks.
©Sharper Image. All Rights Reserved.
ATTENTION
1. Indoor use only.
2. Do not install the light close to something flammable. It can be a cause of fire.
3. Never stare at the light for a long time, it may hurt your eyes.
4. Do not touch the LED panel when it's on. Risk of hot!
5. Install the light tightly to avoid falling off.
6. Keep this product away from children.
  • Page 1 1
  • Page 2 2

Sharper Image 207706 Motion Activated Garage Light User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI