2. Gianni Industries
  3. DL-370

Gianni Industries DL-370, DL-370-US40 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Gianni Industries DL-370 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Copyright © All rights reserved. P-MU-DL-370 Published: 2015.12.02
Remove the security screws
using the enclosed tool.
Remove the head covers. Position the two end caps where
you plan to mount them and mark
the holes on the door and frame.
Drill holes in the marked positions,
and secure the two ends by using
4x25 screws.
Screw hole diameter: 3.3mm
Outlet hole diameter: 12mm
Mount the head covers and tighten
the screws.
41mm
30mm
56mm
38mm
15mm
Screw hole
Outlet hole
Connect the wire to each end of the
loop and test the unit.
Inside diameter: 9mm
DL-370
Copyright © All rights reserved. P-MU-DL-370 Published: 2015.12.02
Remove the security screws
using the enclosed tool.
Remove the head covers. Position the two end caps where
you plan to mount them and mark
the holes on the door and frame.
Drill holes in the marked positions,
and secure the two ends by using
4x25 screws.
Screw hole diameter: 3.3mm
Outlet hole diameter: 12mm
Mount the head covers and tighten
the screws.
41mm
30mm
56mm
38mm
15mm
Screw hole
Outlet hole
Connect the wire to each end of the
loop and test the unit.
Inside diameter: 9mm
DL-370
/