Page is loading ...
Installation Instructions
Model: M-SF 9001
1. Remove your existing shower head.
2. Wrap the Teflon tape provided approximately four times on
thread.
3. Screw the shower head onto the threads by rotating until
firmly place.
4. Wrap the Teflon tape around the thread of the water pipe.
5. Connect the swivel collar to the water pipe by rotating the
swivel collar serval turns.
6. Once hand tightened, use pliers to tighten the swivel collar
until the shower filter is firmly in place.
BENEFITS
- Eliminates toxic fumes and odors
- Avoids dry skin, flaky scalp, dandruff and fading colored hair
- Strong chlorine removal, Up to 99% from 17 ounces of KDF-55
-Lasts 8 to 12 months.
- Fits all showers.
No plumbing required
Chlorine is a toxic element used to chemically disinfect water. However, Chlorine strips protein
from skin and hair leaving it dry and itchy. Filtering out Chlorine from shower water will avoid
dry skin and hair, reduce flaking scalp as well as eyes and lungs irritation. Chlorine exposure
from showering is greater than the total exposure from drinking 8 glasses of unfiltered tap
water each day. Filtering also helps control bacteria, mold and mildew.
/