Prime-Line M 6050 Operating instructions

Brand
Prime-Line
Model
M 6050
Type
Operating instructions

Prime-Line M 6050 is a latch assembly with a strike plate and a variety of screws for different installation scenarios. It is adjustable to ensure a secure latch. The included instructions warn against using a new screw that is larger than the old one, as this could cause the glass to break. The latch assembly is designed for use on doors, and the dimensions of its components are provided in inches and centimeters for easy reference.

Prime-Line M 6050 is a latch assembly with a strike plate and a variety of screws for different installation scenarios. It is adjustable to ensure a secure latch. The included instructions warn against using a new screw that is larger than the old one, as this could cause the glass to break. The latch assembly is designed for use on doors, and the dimensions of its components are provided in inches and centimeters for easy reference.

M 6050 M 6050 M 6050
Tools needed / Herramientas necesarias / Outils requis Tools needed / Herramientas necesarias / Outils requis Tools needed / Herramientas necesarias / Outils requis
Adjust catch to
latch closed.
Regule la trampa al
picaporte cerrado.
Réglez le loqueteau
pour engager le loquet.
Adjust catch to
latch closed.
Regule la trampa al
picaporte cerrado.
Réglez le loqueteau
pour engager le loquet.
Adjust catch to
latch closed.
Regule la trampa al
picaporte cerrado.
Réglez le loqueteau
pour engager le loquet.
CAUTION: Before attempting to install new catch
compare the existing screw with the new screw. Do
not use the new screw if it is larger than the old one.
GLASS BREAKAGE COULD OCCUR.
AVISO: Antes de instalar la nueva pieza, compare el
nuevo tornillo incluido. No use el tornillo nuevo si es
más grande que el usado. ESTO PUEDE PROVOCAR
QUE EL VIDRIO SE QUIEBRE.
AVERTISSEMENT: Avant de procéder à l'installation
de la nouvelle pièce, comparez la nouvelle vis fournie.
N'utilisez pas la nouvelle vis, si celle-ci est de plus
grandes dimensions que l'ancienne. CECI POURRAIT
PROVOQUER LE BRIS DU VERRE. Installez la nouvelle
pièce à la porte et réglez-la selon le besion, pour vous
assurer d'un enclenchement solide.
CAUTION: Before attempting to install new catch
compare the existing screw with the new screw. Do
not use the new screw if it is larger than the old one.
GLASS BREAKAGE COULD OCCUR.
AVISO: Antes de instalar la nueva pieza, compare el
nuevo tornillo incluido. No use el tornillo nuevo si es
más grande que el usado. ESTO PUEDE PROVOCAR
QUE EL VIDRIO SE QUIEBRE.
AVERTISSEMENT: Avant de procéder à l'installation
de la nouvelle pièce, comparez la nouvelle vis fournie.
N'utilisez pas la nouvelle vis, si celle-ci est de plus
grandes dimensions que l'ancienne. CECI POURRAIT
PROVOQUER LE BRIS DU VERRE. Installez la nouvelle
pièce à la porte et réglez-la selon le besion, pour vous
assurer d'un enclenchement solide.
CAUTION: Before attempting to install new catch
compare the existing screw with the new screw. Do
not use the new screw if it is larger than the old one.
GLASS BREAKAGE COULD OCCUR.
AVISO: Antes de instalar la nueva pieza, compare el
nuevo tornillo incluido. No use el tornillo nuevo si es
más grande que el usado. ESTO PUEDE PROVOCAR
QUE EL VIDRIO SE QUIEBRE.
AVERTISSEMENT: Avant de procéder à l'installation
de la nouvelle pièce, comparez la nouvelle vis fournie.
N'utilisez pas la nouvelle vis, si celle-ci est de plus
grandes dimensions que l'ancienne. CECI POURRAIT
PROVOQUER LE BRIS DU VERRE. Installez la nouvelle
pièce à la porte et réglez-la selon le besion, pour vous
assurer d'un enclenchement solide.
2-1/2"
6.4 cm
2-1/2"
6.4 cm
2-1/2"
6.4 cm
2-1/16"
5.2 cm
2-1/16"
5.2 cm
2-1/16"
5.2 cm
3/4"
19 mm
3/4"
19 mm
3/4"
19 mm
11/16"
17 mm
11/16"
17 mm
11/16"
17 mm
  • Page 1 1

Prime-Line M 6050 Operating instructions

Brand
Prime-Line
Model
M 6050
Type
Operating instructions

Prime-Line M 6050 is a latch assembly with a strike plate and a variety of screws for different installation scenarios. It is adjustable to ensure a secure latch. The included instructions warn against using a new screw that is larger than the old one, as this could cause the glass to break. The latch assembly is designed for use on doors, and the dimensions of its components are provided in inches and centimeters for easy reference.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents