EMOH HTB101-12 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the EMOH HTB101-12 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INSTALLATION INSTRUCTIONS FOR HOLDBACKS
1
Lightly mark points on the wall where
the Base will be mounted.
Drill 1/8” pilot holes at the pencil marks
for wood trim and stud installations.
For drywall installations, follow the
instructions at the bottom of the page.
Install the Base to the wall
with 2 screws.
Screw the Rod onto the Base and then the Finial onto the rod until finger tight.
Wrap the curtain onto the holdbacks.





  
 

/