Danfoss AK2-XM 204 & 205 Digital Output & Combination Digital Output Analog Input Modules Installation guide

Category
Digital & analog I/O modules
Type
Installation guide
Instructions
Digital Output & Combination Digital Out – Universal Analog Input Modules
Types AK2-XM 204A, 204B, 205A, 205B
code numbers 080Z0006, 080Z0016, 080Z0005, 080Z0015, 080Z0011, 080Z0018, 080Z0010, 080Z0017
Raise red tabs to mount or dismount.
Use a small screwdriver and the fulcrum
on the module enclosure. Press red tabs
to secure module in position on rail.
A module can be removed from any
position in a lineup if replacement is
necessary.
Mounting on DIN rail
Dimensions
Model Distinctions
All models have 8 digital outputs. Digital output terminal blocks are removable. Each model is available with two terminal
block designs, both shown above.
Models with standard Phoenix-style connectors:
AK2-XM 204A: 8 digital outputs, without override switches, code number 080Z0006
AK2-XM 204B: 8 digital outputs with override switches, code number 080Z0016
AK2-XM 205A: 8 digital outputs, 8 universal analog inputs, without override switches, code number 080Z0005
AK2-XM 205B: 8 digital outputs, 8 universal analog inputs, with override switches, code number 080Z0015
Models with Euromate-style connectors:
AK2-XM 204A: 8 digital outputs, without override switches, code number 080Z0011
AK2-XM 204B: 8 digital outputs with override switches, code number 080Z0018
AK2-XM 205A: 8 digital outputs, 8 universal analog inputs, without override switches, code number 080Z0010
AK2-XM 205B: 8 digital outputs, 8 universal analog inputs, with override switches, code number 080Z0017
5/2003 Danfoss Inc. form revised 12 May 2003
Use this form to record the information about the wiring of each input-output module, so that you will have the information at hand when configuring the
inputs and outputs at the host network controller.
Types of point are: DO=digital output; DI=digital input; AI=analog input.
Communications module address:
I/O module location:
01
02
03
04
05
06
07
08
Point
Number
The unique address of the communications module for this
lineup of modules, as read from the address switches.
The position of the I/O module in relation to the communica-
tions module. Number 1 is the module next to the communica-
tions module, 2 is next, and so on up to 9.
Type of
Point
Description or name of point
Digital Output Connections
0
Combination Digital Output & Universal Analog Input Module
Communications module address:
I/O module location:
The unique address of the communications module for this
lineup of modules, as read from the address switches.
The position of the I/O module in relation to the communica-
tions module. Number 1 is the module next to the communica-
tions module, 2 is next, and so up to 9.
Analog Input Connections
01
02
03
04
05
06
07
08
DO Point
Number
Type of
Point
Description or name of point
Use this form to record the information about the wiring of each input-output module, so that you will have the information at hand when configuring the
inputs and outputs at the host network controller.
Types of point are: DO=digital output; DI=digital input; AI=analog input.
0
Combination Digital Output & Universal Analog Input Module
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Danfoss AK2-XM 204 & 205 Digital Output & Combination Digital Output Analog Input Modules Installation guide

Category
Digital & analog I/O modules
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI