A: Traditional Deck Railing Kit – Includes top and bottom predrilled profiled rails, cap rail, round straight metal balusters, and rail hanger brackets with screws

Species: Green Treated Pine, Brown Treated Pine, Clear Western Red Cedar

Railing Height: 36” & 42”

Railing Length: 6ft & 8ft* (*8ft only available in Green and Brown Treated options)

Notes: Stair Angle Adaptors (E: Accessories) required to transform to stair application. Assembled kit is true to dimension example: 6ft=72inches

Species: Green Treated Pine, Brown Treated Pine, Clear Western Red Cedar

Railing Length: 6ft & 8ft* (*8ft only available in Green and Brown Treated Options)

Notes: Includes specific balusters for stair application. Assembled kit is true to dimension example: 6ft=72inches

C1: Somerset Deck Railing Kit

Species: Green Treated Pine, Brown Treated Pine, Clear Western Red Cedar

Railing Length: 6ft

Notes: Stair railing kit sold separately (C2). Assembled kit is true to dimension example: 6ft=72inches

C2: Somerset Stair Railing Kit

Species: Green Treated Pine, Brown Treated Pine, Clear Western Red Cedar

Notes: Rails are pre slotted to accept the glass panels (D2), require one glass infill pack (D2) with every rail pack (D1)

D2: Clearview Glass Infill

Specs: Clear Tempered 5/16” thick glass slats 6” wide. 7 glass slats for a level kit, and 6 glass slats for a stair application

Railing Height: 36”, 42”, Stairs

Railing Length: 6ft, Glass pack gives all of the glass required to fill a 6ft opening

Notes: Glass panels are set for a 35degree stair angle

E: Accessories

Posts: Green treated, brown treated, clear cedar options. 2pc laminated constructions. 3-1/4”x54”

Rail Hanger Brackets: includes two brackets with screws. Made to fit Vista Deck Railing Kit rails. (same brackets used for stairs or level application)

Angle Adaptors: packs of 15. Pre-set angle of 35degrees. Used with Traditional decking railing kits specifically (A)