Boss Audio Systems PA100B User manual

Brand
Boss Audio Systems
Model
PA100B
Category
Portable speakers
Type
User manual
USER MANUAL
BLUETOOTH
®
SPEAKER
PA100B
WIRELESS
TELEPHONE
888.990.1236
805.988.0215
FAX
805.988.0275
TECHNICAL SUPPORT
planetaudiousa.com/support
PA100B 0313
"MMTQFDJÎDBUJPOTTVCKFDUUPDIBOHFXJUIPVUOPUJDF
2013 Planet Audio
planetaudiousa.com
Warranty card
( THD=10% ) 1 2W
3.5 mm Aux-In Cable
OD 26
”
X H 27 5
”
(OD 66mm X H 70mm)
3 7V 400mAh Li-polymer battery
33W
20Hz~20KHz
DC 5V 400mA
PA100B
press:
press:
press:
Short press:
Parameter
Package Contents
Function Indication Drawing
Operation Specification
-
Slide the On/Oī switch to the "On" posŝƟon, the Blue LED wilůŇash. When the
Green LED is on, the unit is in Bluetooth Pairing Mode.
-Slide the On/Oī switch to the "Oī"posiƟon, all the LED status lights will shut oī.
-The unit will automaƟcally go into “Pairing Mode” when it is turned on.
- Go into your devices seƫngs menu and look for “ ”
-If prompted for a password enter:
AŌer the unit has paired,
and connected it will connect automaƟcally
when PA100B is turned on and the device is in range.
-If no device is found aŌer 25 sec. the PA100B will automaƟcally enter
pairing mode.
- Press “ ” to start playing music
- Press “+” to play the next track
- Press “ -” to play previous track
- Press and Hold either “+/-” for volume
Plug in the supplied 3.5 mm cable into the PA100B. The other end is connected
to the device.
*Please note that only “Volume +/-” will funĐƟon on
the unit. Track control does
not funĐƟon when in Aux-In mode.
-Ʃach the USB cable to the PA100B, and plug in to any USB charger. If the unit
is completely discharged, it take approximately 2.5 hours to fully charge the unit.
Red LED: On- Charging/ Oī– Charging complete
Green LED: On-BT Mode
Blue LED: Flashing-Pairing Mode/ Slow Flash-Connected
USER MANUAL
BLUETOOTH
®
SPEAKER
PA100B
WIRELESS
TELEPHONE
888.990.1236
805.988.0215
FAX
805.988.0275
TECHNICAL SUPPORT
planetaudiousa.com/support
PA100B 0313
"MMTQFDJÎDBUJPOTTVCKFDUUPDIBOHFXJUIPVUOPUJDF
2013 Planet Audio
planetaudiousa.com
Warranty card
( THD=10% ) 1 2W
3.5 mm Aux-In Cable
OD 26
”
X H 27 5
”
(OD 66mm X H 70mm)
3 7V 400mAh Li-polymer battery
33W
20Hz~20KHz
DC 5V 400mA
PA100B
press:
press:
press:
Short press:
Parameter
Package Contents
Function Indication Drawing
Operation Specification
-
Slide the On/Oī switch to the "On" posŝƟon, the Blue LED wilůŇash. When the
Green LED is on, the unit is in Bluetooth Pairing Mode.
-Slide the On/Oī switch to the "Oī"posiƟon, all the LED status lights will shut oī.
-The unit will automaƟcally go into “Pairing Mode” when it is turned on.
- Go into your devices seƫngs menu and look for “ ”
-If prompted for a password enter:
AŌer the unit has paired,
and connected it will connect automaƟcally
when PA100B is turned on and the device is in range.
-If no device is found aŌer 25 sec. the PA100B will automaƟcally enter
pairing mode.
- Press “ ” to start playing music
- Press “+” to play the next track
- Press “ -” to play previous track
- Press and Hold either “+/-” for volume
Plug in the supplied 3.5 mm cable into the PA100B. The other end is connected
to the device.
*Please note that only “Volume +/-” will funĐƟon on
the unit. Track control does
not funĐƟon when in Aux-In mode.
-Ʃach the USB cable to the PA100B, and plug in to any USB charger. If the unit
is completely discharged, it take approximately 2.5 hours to fully charge the unit.
Red LED: On- Charging/ Oī– Charging complete
Green LED: On-BT Mode
Blue LED: Flashing-Pairing Mode/ Slow Flash-Connected
USER MANUAL
BLUETOOTH
®
SPEAKER
PA100B
WIRELESS
TELEPHONE
888.990.1236
805.988.0215
FAX
805.988.0275
TECHNICAL SUPPORT
planetaudiousa.com/support
PA100B 0313
"MMTQFDJÎDBUJPOTTVCKFDUUPDIBOHFXJUIPVUOPUJDF
2013 Planet Audio
planetaudiousa.com
Warranty card
( THD=10% ) 1 2W
3.5 mm Aux-In Cable
OD 26
”
X H 27 5
”
(OD 66mm X H 70mm)
3 7V 400mAh Li-polymer battery
33W
20Hz~20KHz
DC 5V 400mA
PA100B
press:
press:
press:
Short press:
Parameter
Package Contents
Function Indication Drawing
Operation Specification
-
Slide the On/Oī switch to the "On" posŝƟon, the Blue LED wilůŇash. When the
Green LED is on, the unit is in Bluetooth Pairing Mode.
-Slide the On/Oī switch to the "Oī"posiƟon, all the LED status lights will shut oī.
-The unit will automaƟcally go into “Pairing Mode” when it is turned on.
- Go into your devices seƫngs menu and look for “ ”
-If prompted for a password enter:
AŌer the unit has paired,
and connected it will connect automaƟcally
when PA100B is turned on and the device is in range.
-If no device is found aŌer 25 sec. the PA100B will automaƟcally enter
pairing mode.
- Press “ ” to start playing music
- Press “+” to play the next track
- Press “ -” to play previous track
- Press and Hold either “+/-” for volume
Plug in the supplied 3.5 mm cable into the PA100B. The other end is connected
to the device.
*Please note that only “Volume +/-” will funĐƟon on
the unit. Track control does
not funĐƟon when in Aux-In mode.
-Ʃach the USB cable to the PA100B, and plug in to any USB charger. If the unit
is completely discharged, it take approximately 2.5 hours to fully charge the unit.
Red LED: On- Charging/ Oī– Charging complete
Green LED: On-BT Mode
Blue LED: Flashing-Pairing Mode/ Slow Flash-Connected
USER MANUAL
BLUETOOTH
®
SPEAKER
PA100B
WIRELESS
TELEPHONE
888.990.1236
805.988.0215
FAX
805.988.0275
TECHNICAL SUPPORT
planetaudiousa.com/support
PA100B 0313
"MMTQFDJÎDBUJPOTTVCKFDUUPDIBOHFXJUIPVUOPUJDF
2013 Planet Audio
planetaudiousa.com
Warranty card
( THD=10% ) 1 2W
3.5 mm Aux-In Cable
OD 26
”
X H 27 5
”
(OD 66mm X H 70mm)
3 7V 400mAh Li-polymer battery
33W
20Hz~20KHz
DC 5V 400mA
PA100B
press:
press:
press:
Short press:
Parameter
Package Contents
Function Indication Drawing
Operation Specification
-
Slide the On/Oī switch to the "On" posŝƟon, the Blue LED wilůŇash. When the
Green LED is on, the unit is in Bluetooth Pairing Mode.
-Slide the On/Oī switch to the "Oī"posiƟon, all the LED status lights will shut oī.
-The unit will automaƟcally go into “Pairing Mode” when it is turned on.
- Go into your devices seƫngs menu and look for “ ”
-If prompted for a password enter:
AŌer the unit has paired,
and connected it will connect automaƟcally
when PA100B is turned on and the device is in range.
-If no device is found aŌer 25 sec. the PA100B will automaƟcally enter
pairing mode.
- Press “ ” to start playing music
- Press “+” to play the next track
- Press “ -” to play previous track
- Press and Hold either “+/-” for volume
Plug in the supplied 3.5 mm cable into the PA100B. The other end is connected
to the device.
*Please note that only “Volume +/-” will funĐƟon on
the unit. Track control does
not funĐƟon when in Aux-In mode.
-Ʃach the USB cable to the PA100B, and plug in to any USB charger. If the unit
is completely discharged, it take approximately 2.5 hours to fully charge the unit.
Red LED: On- Charging/ Oī– Charging complete
Green LED: On-BT Mode
Blue LED: Flashing-Pairing Mode/ Slow Flash-Connected
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Boss Audio Systems PA100B User manual

Brand
Boss Audio Systems
Model
PA100B
Category
Portable speakers
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents