Lava SSerial-PCIe/LP Installation guide

Lava
Brand
Lava
Model
SSerial-PCIe/LP
Category
Interface cards/adapters
Type
Installation guide

Lava SSerial-PCIe/LP is a PCIe Serial Controller card that allows you to add one RS232 serial port to your computer. The card is compatible with Windows 2000, XP, and Vista operating systems.

The SSerial-PCIe/LP is a plug-and-play card, so it is easy to install. Simply insert the card into an available PCIe slot on your computer and Windows will automatically detect the card and install the necessary drivers.

Once the card is installed, you can use the serial port to connect to a variety of devices, such as printers, scanners, modems, and other serial devices. The card supports data transfer rates of up to 921.6 Kbps, making it suitable for a wide range of applications.

Lava SSerial-PCIe/LP is a PCIe Serial Controller card that allows you to add one RS232 serial port to your computer. The card is compatible with Windows 2000, XP, and Vista operating systems.

The SSerial-PCIe/LP is a plug-and-play card, so it is easy to install. Simply insert the card into an available PCIe slot on your computer and Windows will automatically detect the card and install the necessary drivers.

Once the card is installed, you can use the serial port to connect to a variety of devices, such as printers, scanners, modems, and other serial devices. The card supports data transfer rates of up to 921.6 Kbps, making it suitable for a wide range of applications.

LAVA SSerial-PCIe/LP
Quick Installation Guide
Rev. A00
COMPUTERS
LAVA
SS-550_LP PCIe
MADE
IN
CANADA
SEMICONDUCTOR
MCS9901CV-AA
INSL10200
4E42503 - 06 0743
RoHS
Pb
P.N. MOKO L147.x
1
1. With the power turned off,insert the SSerial-PCIe/LP card into any
free PCIe slot in your PC.Make sure the card is well seated.Turn your
PC on and start Windows.
2. Windows will automatically detect the SSerial-PCIe/LP as a new PCIe
Serial Controller and ask you to insert the Installation Disk. Windows
should find the appropriate files and install them automatically.
Windows XP/Vista may display a message to the effect that the
drivers are not digitally signed.This warning can be ignored.
3. After the necessary files have been copied, Windows will complete
the full installation of the SSerial-PCIe/LP.
4. If files are not found automatically, select Run from the Start Menu,
navigate to the CD, and run AutorunPro.EXE). Choose your card and
driver from the menus that appear.
Windows 2000/
XP/Vista Installation
The SSerial-PCIe/LP hardware appears in Device Manager in the Ports
tree.(see next page). Please note that any changes to the Resources (I/O
Address & IRQ) used by the port on the SSerial-PCIe/LP must be made
through the Resources page of the Port page.
2
Changing the Com numbering of your
SSerial-PCIe/LP port (Windows 2000/XP/Vista)
In Windows 2000/XP/Vista, Com port numbering can be changed by
double-clicking the serial port entry displayed in Windows' Device
Manager. Go to Port Settings | Advanced, and choose Com Port #.
LAVA Computer MFG Inc.
LAVA
Technical Support
9:00 am to 5:30 pm Monday to Friday (Eastern Time)
Tel: +416 674-5942
Fax: + 416 674-8262
E-mail: [email protected]om
Internet: www.lavalink.com
This device complies with part 15 of the FCC Rules.Operation is subject
to the following conditions:(1) This device may not cause harmful interference,
and (2) this device must accept any interference received,including interference
that may cause undesired operation.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Lava SSerial-PCIe/LP Installation guide

Lava
Brand
Lava
Model
SSerial-PCIe/LP
Category
Interface cards/adapters
Type
Installation guide

Lava SSerial-PCIe/LP is a PCIe Serial Controller card that allows you to add one RS232 serial port to your computer. The card is compatible with Windows 2000, XP, and Vista operating systems.

The SSerial-PCIe/LP is a plug-and-play card, so it is easy to install. Simply insert the card into an available PCIe slot on your computer and Windows will automatically detect the card and install the necessary drivers.

Once the card is installed, you can use the serial port to connect to a variety of devices, such as printers, scanners, modems, and other serial devices. The card supports data transfer rates of up to 921.6 Kbps, making it suitable for a wide range of applications.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents