PREMIUM PRN10060MS User manual

PRN10050MW

PRN10060MS

I . Product Specifications

1, Introduction

- Structure: upper refrigeration compartment; lower freezing compartment

- Total - frost free

- Reversible door

- DOE platform

1、 Specifications

Model PRN10050MW, PRN10060MS

Voltage / frequency 115V~/60Hz

Input power (W) 120W

current (A) 1.4

Energy

consumption(kwh/24h)

0.9

Energy consumption

level DOE

Refrigerant R600a/42g

Freezer compartment

effective capacity(L) 75

Refrigeration

compartment effective

capacity (L)

205

Total effective

capacity (L) 280

Net weight (lb) 119.1

Gross weight (lb) 132.3

II. Safety precautions

115V-60 HZ AC

III. Disassembly

1. The internal structure:

1、Thermostat

2、Temperature control panel

3、Refrigerator shelf

4、Crisper(The crisper contains ice tray and manual)

5、Adjustable foot

6、Freezer shelf

7、Freezer tray

8、lamp switch

9、Refrigerator tray

OPERATION

HMI and keys operation

The keys in HMI and display layout are referred in the following figure：

1.1 Key

A.SET position set key

1.2 Display screen

① Shift 1

② Shift 2

③ Shift 3

④ Shift 4

⑤ Shift 5

1.3 Display

◆ Once initially powered on，the display screen is on full display for 3s，and then operates

as the displayed middle shift.

◆ Normal operation display

In case of a failure，the appropriate LED light show in combination the failure code (in recycling display)；

In case of no failures，the actual operation position of refrigerator will be on display.

1.4 Shift setting

Each time the shift setting key A is pressed once，the shift position changes one time. After the shift setting

has been completed, the refrigerator will operate according to the set value in 5mins.

The shift regulation is：

1.5 Fault indication

Display

Malfunction

The LED1 and LED2 lit

Refrigerator temperature sensor circuit

The LED1 and LED3 lit

Freezer defrost sensor

The LED1 and LED4 lit

Ambient temperature sensor

Shift 1

Shift 2

Shift 3

Shift 4

Shift 5

A ① ② ③ ④ ⑤

Temperature Control

When using the refrigerator-freezer for the

first time or after defrosting, turn the

temperature control to set “MAX” for at least

two hours before introducing the food to be

Repalcing Your Light Bulb

Note：

All parts removed must be saved to do the replacement of the light bulb.

Before removing the light bulb, either turn off the appliance or disconnect

the electricity leading into the appliance at the main power supply. Failure

to do so could result in electrical shock or personal injury.

 Unplug the AC power cord from the wall.

 Pull down to remove the lamp cover.

 Unscrew the bulb.

 Repace with a 15-watt bulb that is the same shape and size.

REQUESTING ASSISTANCE OR SERVICE

If the problem is not due to one of the items listed in Troubleshooting, Contact

the dealer or authorized Service Company.

IV. Product disassembly display

V. user manual

1. product Installation

RECOMMENDATIONS：

1) WARNING – Keep ventilation openings, in the appliance enclosure or in the built-in

structure, clear of obstruction.

2) WARNING – Do not use mechanical devices or other means to accelerate the

defrosting process, other than those recommended by the manufacturer.

3) WARNING – Do not damage the refrigerant circuit.

4) WARNING – Do not use electrical appliances inside the food storage compartments

of the appliance, unless they are of the type recommended by the manufacturer.

5) The appliance has to be unplugged after use and before carrying out user

maintenance on the appliance.

6) This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by a

person responsible for their safety.

7) Children should be supervised to ensure that they do not play with the appliance.

8) If the supply cord is damaged, it must be replaced by the manufacturer, its service

agent or similarly qualified persons in order to avoid a hazard.

9) Please abandon the refrigerator-freezer according to local regulators for it use

flammable blowing gas and refrigerant.

10）Please according to local regulations regarding disposal of the appliance for its

flammable refrigerant and blowing gas. Before you scrap the appliance, please take off

the doors to prevent children trapped.

VI. Tools required for maintenance

name

usage

electronic leak detector

Leakage or not

cross-screwdriver

Unscrew the screw

31 pieces of tool assembly

冷凝器

防露管干

燥

过

滤

器

回

气

换

热

管

毛

细

管

冷冻室蒸发器

压

缩

机

Condenser

Anti dew tube

Compressor

Freezer Evaporator

Dry and

Filtering

device

Capillary tube

Heat exchange tube

VIII. drawing diagram

VIIII. System diagram

ELECTRIC DIAGRAM

TH Sensor

Power Plug

PTC

Compressor

Protector

Lamp Switch

R Lamp

Defrost

Sensor

R Sensor

Control Board

Fan Motor

Defrost

Fuse

Defrost

Heater

N

L

60Hz

115V~

C

This product is for dome stic use only

Use&Ca re ma nua l

Importa nt sa fegua rds

PREMIUM PRN10060MS User manual

PREMIUM PRN10060MS User manual

Other documents