Chrysler 2021 Pacifica Hybrid Quick start guide

Category
Remote starters
Type
Quick start guide

This manual is also suitable for

QUICK QUICK
START START
GUIDEGUIDE
Chrysler PacicaChrysler Pacica
Driver Memory Buttons
Hood Release
Radio On/O
Electric Park Brake
Gear Selector
HomeLink® Buttons
Instrument Cluster
Display Buttons
Cruise Control
Buttons
USB C & A Ports
Tune/Browse
VEHICLE OVERVIEW
HomeLink®
GARAGE DOOR OPENER
While the car is ON, hold the handheld garage door transmitter 1-3 inches
from the HomeLink® button you want to program in the vehicle.
1
Push and hold both the HomeLink
®
button being programmed and the button
on the garage door transmitter.
2
Push and hold the two outside HomeLink® buttons for 20 seconds until the orange
indicator ashes. An individual channel cannot be erased.
TO ERASE ALL SET CHANNELS:
For Non-Rolling Code garage door openers, watch for the indicator light to
go constant.
For Rolling Code garage door openers, watch for the indicator light to go
from a slow blink to blinking rapidly.
3
For Rolling Code garage door openers only, rmly push and release the
“LEARN” or “TRAIN” button on your garage door opener motor in your garage,
then push the HomeLink® button in your vehicle for two long holds.
4
If the programming was successful, your garage door should open and close
with your chosen HomeLink® button.
5
ROLLING OR NON-ROLLING?
Check your garage door opener motor in your garage for a “LEARN”
or “TRAIN” button by the hanging antenna. If you have one of these,
you have a Rolling Code garage door opener.
?
For more detailed instructions, see “Universal Garage Door Opener
(HomeLink®)” in your Owner’s Manual. Please call 1-800-355-3515 if
you require assistance.
LINK YOUR GARAGE DOOR
Head Restraints
FRONT SEAT FOUR-WAY HEAD RESTRAINTS
To tilt forward, pull the top of the head restraint toward the front of the vehicle to the desired position.
FORWARD/REARWARD ADJUSTMENT
To tilt rearward, pull the top of the head restraint to the furthest forward position and the head
restraint will return to the upright position.
UPRIGHT TILTED
Pull up on the head restraint to raise it.
Push the adjustment button while pushing down on the head
restraint to lower it.
UP/DOWN ADJUSTMENT
REMOVAL
With the head restraint raised all the way, push the release and
adjustment buttons while pulling up on the head restraint.
INSTALLATION
Insert the head restraint posts into the holes and push
downward.
The seatback angle may need
to be adjusted to fully remove
the head restraint.
TIP:
ADJUSTMENT
BUTTON
RELEASE
BUTTON
ADJUST YOUR HEAD RESTRAINTS
Connected Services
WITH CONNECTED SERVICES YOU CAN...
You can use your remote commands from the
Uconnect App, your Owner’s Site account, or by
calling an agent.
However, not all remote commands will work
when calling an agent.
TIP:
Lock Your Vehicle
Unlock Your Vehicle
Remote Start Your Vehicle
Cancel Remote Start
Activate Your Horn
ACTIVATE YOUR REMOTE SERVICES
1Press "Apps" on the touchscreen.
2
Press "Activate Services".
3
Press "Activate Now".
4
There are two ways to activate: via email or via
an agent. On the next page, you can either enter
your name and email, or press "Call An Agent" to
directly speak with someone.
Mopar® YOUR Way
REAP THE BENEFITS OF YOUR OWNER'S PROFILE
Get an online experience all on your own—tailored to you and your vehicle—accessible
anytime, anywhere.
24/7 ACCESS TO EVERYTHING YOU NEED
Custom dashboard for every vehicle in your garage
Access to your vehicle's Owner's Manual, warranty & more
Ability to set preferred dealer & schedule service with ease
Maintenance records and up-to-date vehicle health reports**
Special oers on exceptional Mopar® service at your dealership
Remote vehicle commands right from your mobile device**
**Requires an active SiriusXM GuardianTM subscription
*Canadian residents are not required to create a prole, as one is created when a SiriusXM GuardianTM account is activated.
UTILIZE YOUR SERVICES & OWNER PROFILE
Pair A Phone
Make sure Bluetooth
®
is enabled on your mobile device.
11
With the vehicle in the ACC or ON/RUN position, press
the Phone button in the vehicle’s touchscreen menu bar.
22
Press "Device Manager".
33
Press “Add Device" and follow the prompts.
44
KEEP IN MIND:
Some mobile phones will require you to enter a PIN as part of the connection process.
For more detailed connecting instructions, refer to “Phone Operation” in your Uconnect
radio book.
READY TO REMOVE A PHONE OR AUDIO DEVICE?
1
Press the “Device Manager” button on the touchscreen.
2
Press the “Settings” gear icon next to the phone or device you want to remove.
3
Press “Delete Device”. The device should be removed.
For AndroidTM Users, if the Android AutoTM app was not previously downloaded, it will download
the rst time you plug in your device.
YOU MAY ALSO BE ABLE TO CONNECT YOUR APPS
KEEP IN MIND:
For Apple
®
Users, Apple CarPlay
®
is only compatible with iPhone5
®
or later and requires Siri being
enabled in Settings.
If your vehicle is equipped with Android AutoTM & Apple CarPlay®, connect your unlocked smartphone to one of
the media USB ports in your vehicle.
Once connected and recognized, the Android Auto
TM
or Apple CarPlay
®
icon will replace the phone icon on your
personalized menu bar.
CONNECT YOUR PHONE
Hands-Free Liftgate, Sliding Doors & Pedestrian Alert
Do not move your foot sideways or in a sweeping
motion; the sensors may not detect the motion.
X
With the key fob on your person, use a straight in and out kicking
motion under the appropriate zone to open the Hands-Free Liftgate
or Hands-Free Sliding Door. The feature does not close the doors.
KEEP IN MIND:
If equipped with the Trailer Tow Package:
The activation zones for the Hands-Free Liftgate will be located
on the left and right side of the receiver.
In Hybrid vehicles (in electric mode only),
a sound is emitted to alert pedestrians that
your vehicle is approaching. The sound will
increase or decrease in volume depending
on the varying speed of the vehicle.
Did You Know You May Have An
Audible Pedestrian Alert System?
Sliding Door Activation Zone
Liftgate Activation Zone
((((
((((
((((
((((
Stow 'N Go Seating
THIRD ROW POWER STOW 'N GO SEAT
AUTO ADVANCE 'N RETURN — IF EQUIPPED
Push the button to automatically move the front seat to a position that will allow second row Stow 'N Go
seat movement. Push the button again to return the front seat back to its previous position.
Push the STOW button to stow the seat(s).
2
1
Push the NORMAL button to return the seat(s)
to the normal seated position.
3
Push the FORWARD/BACK button to move the
seat(s) back in the forward or reverse direction.
Push the RIGHT, LEFT, or BOTH button to
select the desired seat(s).
HANDS-FREE FEATURES & STOW 'N GO
Uconnect 5/5 NAV With 10.1-Inch Display
ACCESS YOUR MEDIA, PHONE, VEHICLE SETTINGS, AND NAVIGATION THROUGH SEVERAL MODES
HOME Customize your Home page with shortcut widgets. Now, you can access your favorite radio
stations and your smartphone on the same screen!
MEDIA
Listen to all of your favorite radio stations, including SiriusXM
®
, and play music from your USB
or Bluetooth
®
device.
PHONE
Pair your smartphone and make hands-free calls or send hands-free messages to any of your
contacts.
COMFORT Too hot? Too cold? Set your vehicle's temperature through several climate control options.
Activate automatic climate control to keep your vehicle at the temperature you want.
VEHICLE Access radio and vehicle settings, like changing the radio display or adjusting the brightness
of the interior lights.
NAVIGATION
Having trouble nding a place? Enter an address or search from multiple points of interest to
navigate anywhere using Uconnect.
10.1-inch Touchscreen Display
SiriusXM® 360L
Android AutoTM/Apple CarPlay®
Recongurable Menu Bar
Connected Vehicle Services
Amazon Alexa Integration
User Proles
FEATURES EQUIPPED:
Customize displayed information such as the time:
INSTRUMENT CLUSTER SCREEN SETUP:
1
2
Use the Up and Down arrows to select Screen Setup in the Instrument Cluster Display.
Select an area of the Cluster to display the time. Once selected, pick "Time".
The current time will now display in that area of the cluster.
Selectable Widgets
Customizable Upper Status Bar
Recongurable Bottom Menu Bar
GET TO KNOW YOUR RADIO
Warning & Indicator Lights
©2021 FCA US LLC. All Rights Reserved. Tous droits réservés. Chrysler is a registered trademark of FCA US LLC or FCA Canada Inc., used under license.
Chrysler est une marque déposée de FCA US LLC ou FCA Canada Inc., utilisée sous le permis. App Store is a registered trademark of Apple Inc. Google Play
Store is a registered trademark of Google.
For additional information on any of the topics in this publication, please refer to your Owner’s Manual.
Fourth Edition
RUP_QSG_EN_USC_AA
Oil Pressure
Adaptive Cruise
Control (ACC) Fault
Cruise Control Ready
LaneSense
Adaptive Cruise Control Set
With No Target Detected
Service All Wheel
Drive (AWD)
Engine Check/
Malfunction Indicator
Electric Power
Steering Fault
Service Automatic
Emergency Braking (AEB)
Automatic Emergency
Braking (AEB) O
Anti-Lock Brake
System (ABS)
Oil Temperature
Electronic Throttle
Control (ETC)
Air Bag
Adaptive Cruise Control
Set With Target Detected
Parking/
Headlights On
LaneSense
Battery Charge Door OpenBrake
Liftgate Open
Hood Open
Engine Coolant
Temperature
Vehicle Security
Transmission
Temperature
Seat Belt Reminder
Cruise Control Set
Service LaneSense
LaneSense
Electronic Park Brake Electronic Stability
Control (ESC) OFF
Electronic Stability
Control (ESC) Active
Stop/Start Active
Low Fuel
Front Fog
Turn Signal
Low Washer Fluid
Adaptive Cruise
Control (ACC) Ready
KeySense
Service Stop/
Start System
Tire Pressure Monitoring
System (TPMS)
Set Speed Display High Beam
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Chrysler 2021 Pacifica Hybrid Quick start guide

Category
Remote starters
Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI