Xerox 860 Installation guide

Type
Installation guide
readme
*******************************************************************
*******************************************************************
* *** IMPORTANT NOTE *** *
* *
* CentreWare Services for UNIX Systems is a two part installation process *
* 1. a code package i.e SolarisXPXX_4.00.60.tar *
* 2. a printer support package i.e. PrinterPkgXPXX_200
6_06_15.tar *
* *
* The code package must be installed first followed by the printer *
* support package. *
* *
* Installation requires the user have root or superuser privileges. *
* *
*******************************************************************
*******************************************************************
To install the package expand the tar file and execute setup.
NOTE: setup for the code package will expand and install the compressed tar
file in the install directory; generate script files and other files
that are needed at run time. You do not need to uninstall the package
if you are upgrading or reinstalling.
The following syntaxes are supported:
1. setup
2. setup tmp_path
3. setup install install_path
4. setup install install_path tmp_path
install_path is the installation directory which will contain
all of the Xerox software.
tmp_path is a temporary work area. /tmp is the default work area.
To uninstall a previous installation:
1. Use xpadmin to remove all Xerox print queues.
2. For Solaris installation, use pkgrm to remove the CTRWxpxx package.
For all other installations, remove the "Xerox" installation directory.
3. Remove /var/spool/Xerox directory.
  • Page 1 1

Xerox 860 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI