Gamber-Johnson 2018+ Freightliner Cascadia Dash Mount Installation guide

Gamber-Johnson
Brand
Gamber-Johnson
Model
2018+ Freightliner Cascadia Dash Mount
Category
Mounting kits
Type
Installation guide

This manual is also suitable for

Gamber-Johnson 2018+ Freightliner Cascadia Dash Mount

This dash mount is designed to replace the existing dash panel located just to the right of the steering wheel in 2018+ Freightliner Cascadia models. It comes with an optional power port adapter that can be added to the back side of the mounting plate for powering computers that use this type of power plug. The dash mount has multiple AMP's and Vesa 75mm mounting hole locations pre-drilled into the mounting plate for mounting your specific cradle or docking station.

Gamber-Johnson 2018+ Freightliner Cascadia Dash Mount

This dash mount is designed to replace the existing dash panel located just to the right of the steering wheel in 2018+ Freightliner Cascadia models. It comes with an optional power port adapter that can be added to the back side of the mounting plate for powering computers that use this type of power plug. The dash mount has multiple AMP's and Vesa 75mm mounting hole locations pre-drilled into the mounting plate for mounting your specific cradle or docking station.

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
Rev.A
INST-832
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
Existing Dash Panel
This instruction sheet is for the Gamber-Johnson 2018 Freightliner Cascadia dash
mount only. For other products sold by Gamber-Johnson please see their specific
instruction sheets.
The 2018 Freightliner Cascadia dash mount is designed to replace the existing
dash panel located just to the right of the steering wheel. Remove the existing
dash panel by removing the (4) screws that hold it in place.
2018 Frightliner Cascadia with
existing dash panel
2018 Frightliner Cascadia with
the Gamber-Johnson 2018
Freightlinger Cascadia dash
mount and Samsung Tab Active 2
docking station (7160-1005-00)
Revision
© Copyright 2017 Gamber-Johnson, LLC
7160-1124
2018 Freightliner Cascadia dash mount
PS-001
Printing Spec:
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Form Product
INSTALLATION INSTRUCTIONS
quick connect terminals supplied with the power port adapter.
mounting bracket on the back side of the mounting plate. Then attach the power
adapter that can be added to the back side of the mounting plate for powering
supply (purchased separately) wire leads to the power port adapter with the
The 2018 Freightliner Cascadia dash mount comes with an optional power port
computers that use this type of power plug. Attach the power adatper to the
The 2018 Freightliner Cascadia dash mount has muliple AMP's and Vesa 75mm
mounting hole locations pre-drilled into the mounting plate for mounting your
specific cradle or docking station. Chose the set of holes that best locates your
device on the panel.
There is also an AMP's to Vesa 75mm adapter that allows you to offset the cradle
or dock 1" from the mounting plate. This is sometimes needed for clearance of
holddown clips or access to the lock on some Gamber-Johnson cradles or docks.
mounting plate
AMPS to Vesa 75mm
adapter
mounting plate
power port adapter
power port adapter
mounting bracket
Example of dock mounted directly to the mounting plate:
Mounting plate with a Gamer-Johnson 7160-1005-00 Samsung Tab
Active 2 docking station. Attach the completed assembly to the dash
using the 4 screws that held the origonal vehicle dash panel in place.
Example of cradle mounted with the AMP's to Vesa 75mm adapter:
Mounting plate with a Gamer-Johnson 7160-0774 TabCruzer Mini universal
cradle. Attach the completed assembly to the dash using the 4 screws that
held the origonal vehicle dash panel in place.
cutouts for routing power or
peripheral cables behind the dash
AMP's
to
Vesa 75mm
adapter
  • Page 1 1
  • Page 2 2
  • Page 3 3

Gamber-Johnson 2018+ Freightliner Cascadia Dash Mount Installation guide

Gamber-Johnson
Brand
Gamber-Johnson
Model
2018+ Freightliner Cascadia Dash Mount
Category
Mounting kits
Type
Installation guide
This manual is also suitable for

Gamber-Johnson 2018+ Freightliner Cascadia Dash Mount

This dash mount is designed to replace the existing dash panel located just to the right of the steering wheel in 2018+ Freightliner Cascadia models. It comes with an optional power port adapter that can be added to the back side of the mounting plate for powering computers that use this type of power plug. The dash mount has multiple AMP's and Vesa 75mm mounting hole locations pre-drilled into the mounting plate for mounting your specific cradle or docking station.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents