Sigma MiniTouch PS/2 Plus Installation guide
- Category
- Keyboards
- Type
- Installation guide
This manual is also suitable for
1
Introducing Your MiniTouch Plus
The MiniTouch Plus has all the features and functions of
a standard 101-key keyboard in two-thirds the size. It
provides compact, space-saving benefits without giving
up the power and the extended functions offered by a
full-sized 101-key keyboard.
Features and Benefits
• 80-key mini-keyboard with 12 function keys
• PS/2 and IBM AT enhanced 101/102-key keyboard
compatible
• PS/2 or AT (5-pin DIN) keyboard connector
(depending on the model purchased)
• Separate Scroll Lock, Num Lock, and Caps Lock
LED indicators
• Embedded numeric keypad with cursor and screen
control capabilities
• Special Fn key for accessing the cursor and screen
control keys, F11 and F12 key functions, and
embedded numeric keypad
• Ctrl and Alt keys, one on each side for added
convenience
• High-quality keyswitches for the click and feel that
typists prefer
• Standard QWERTY keyboard layout
• Snap-open legs for height adjustment
MiniTouch Plus
Quick Installation Guide
04-0131B
2
Specifications
Electrical characteristics:
• Input power: +5V DC
• Switch activation mechanism: Conductive rubber
Physical & mechanical characteristics:
• Connector type : PS/2 or AT (5-pin DIN)
• Number of keys: 80
• Key switch life: 20 million cycles
• Travel distance: 3.0 + 0.5 mm
• Dimensions: 11 5/8" (L) x 6" (W) x 1 1/2" (H)
• Weight: 1.6 lbs
Environmental operating conditions:
• Operating temperature: 32
o
F to 130
o
F
• Storage temperature: 10
o
F to 160
o
F
• Relative humidity: 20% to 95%, non-condensing
• Altitude: –1000 ft. to 10,000 ft.
Package Contents
• MiniTouch Plus
• Quick Installation Guide
Setting Up Your Keyboard
Turn your computer OFF before plugging the keyboard
into your computer. The keyboard's connector is keyed
for proper insertion. Use the snap-open legs on the
bottom of the keyboard to adjust the slant/height for
your comfort.
3
Keyboard Functions
The MiniTouch Plus' space-saving design requires the
dual alpha/numeric function of certain keys. Since the
numeric keypad feature is controlled by the Num Lock
key, an inconvenient situation will occur when using a
computer that automatically enables the Num Lock key
with each boot up. Refer to the following solutions:
1. If your computer's BIOS setup utility has a Num
Lock option, set it to OFF.
2. If your computer's BIOS setup utility does not have
a Num Lock option, press the Num Lock key to turn
off the numeric keypad after each boot up.
Num Lock – Embedded Numeric Keypad
Press the Num Lock key to enable the numeric keypad
function. The Num Lock LED at the top right corner
indicates its ON/OFF status. The shaded keys in the
following keyboard layout identify the locations of the
numeric keypad keys.
Figure 1. Embedded Numeric Keypad
4
Fn – Special Function Keys
The Fn key is used with the cursor-control (arrow) keys,
the F1 and F2 keys, and the embedded numeric keypad
to provide several functions. To execute a function
defined on a key within an outline box such as F11,
simultaneously press the Fn key with the desired function
key.
Note: The shaded keys in the following keyboard
layout identify the locations of the keys
associated with the use of the Fn key.
Figure 2. Fn Special Function Keys
Fn + Cursor Control Keys
The cursor control (arrow) keys will become screen control
keys when used with the Fn key. The screen control keys
PgUp, PgDn, Home, End are defined by your application
and typically move the screen cursor up or down, to the
beginning or end of a screen, or to the beginning or end
of a line.
Fn + F1/F2 Keys
To enable the F11 or F12 function, simultaneously press
the Fn key plus the F1 or F2 key, respectively.
5
Fn + Shift Keys + Alpha Numeric Keypad
To use the alpha character when NUM Lock is turned on:
• Press and hold the Fn key to enable the alpha
characters
• Press and hold the Fn plus the Shift key to enable
the uppercase alpha characters
6
Blank Page
7
Technical Support and Warranty
QUESTIONS? SIIG’s Online Support has answers!
Simply visit our website at www.siig.com and click on Support.
Our online support database is updated daily with new drivers
and solutions. Answers to your questions could be just a few clicks
away. You can also submit questions online and one of our technical
support analysts will promptly respond.
A 5-year manufacturer warranty supplied with this product is
offered by SIIG, Inc. Please see SIIG's website for more warranty
details. If you should happen to encounter any problems with this
product, please follow the procedures below.
If it is within the store's return policy period, please return the
product to the store where you purchased from.
If your purchase has passed the store's return policy period, please
follow these steps to have the product repaired or replaced.
Step 1: Submit your RMA request:
Go to www.siig.com, click Support, then RMA to submit a
request to SIIG RMA. If the product is determined to be
defective, an RMA number will be issued. SIIG RMA department
can also be reached at (510) 413-5333.
Step 2: After obtaining an RMA number, ship the product.
• Properly pack the product for shipping. All software, cable(s)
and any other accessories that came with the original package
must be included.
• Clearly write your RMA number on the top of the returned
package. SIIG will refuse to accept any shipping package, and
will not be responsible for a product returned without an
RMA number posted on the outside of the shipping carton.
• You are responsible for the cost of shipping the product to SIIG
at the following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538
RMA #:
• SIIG will ship the repaired or replaced product via Ground
in the U.S. and International Economy outside of the U.S. at
no cost to the customer.
MiniTouch Plus is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc.
Other names used in this publication are for identification only and may be trademarks of their
respective companies.
July, 2005 Copyright © 2005 by SIIG, Inc. All rights reserved.
PRODUCT NAME
MiniTouch Plus
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS
B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Ave.
Fremont, CA 94538-3152
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer
of I/O connectivity products, including PCI & ISA serial and parallel
ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b),
Networking, Sound Cards, and other accessories. SIIG is the premier
one-stop source of upgrades.
SIIG products offer comprehensive user manuals, many user-friendly
features, and are backed by an extensive manufacturer warranty.
High-quality control standards are evident by the overall ease of
installation and compatibility of our products, as well as one of the
lowest defective return rates in the industry. SIIG products can be
found in computer retail stores, mail order catalogs, and e-commerce
sites in the Americas and the UK, as well as through major distributors,
system integrators, and VARs.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Sigma MiniTouch PS/2 Plus Installation guide
- Category
- Keyboards
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI