2. Computers & electronics
  3. Audio & home theatre
  4. MP3/MP4 players
  5. Docking speakers
  6. JBL
  7. EON ONE PRO

JBL EON ONE PRO User guide

  • Hello! I am an AI chatbot trained to assist you with the JBL EON ONE PRO User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
QUICKSTART GUIDE
BATTERY POWERED | ONE HAND CARRY | BLUETOOTH AUDIO | LEGENDARY JBL SOUND
2. CHARGE THE UNIT
1. Confirm the Power Switch (J) is in the
OFF position.
2. Connect the power cord to the Power
Receptacle on the rear of the speaker.
3. The Battery Level Meter (L) will
illuminate, indicating the unit is charging.
4. The unit is charged when the Battery
Level Meter (L) is fully illuminated when
powered on or of f.
1. LISTENING CONFIGURATIONS
Speaker Only 1 Spacer 2 Spacers
123
3. PLUG IN THE INPUTS
1. Turn the Channel Volume Controls (F)
and Master Volume Control (N) all the
way to the left before connecting any
inputs.
2. Connect your device(s) via the input jacks
provided.
3. If CH1 – CH4 inputs are being used,
select MIC or LINE via the Mic/Line
Button (E).
4. If connecting instruments directly to
inputs 3 – 4, engage the Hi-Z button (Q).
Please visit http://www.jblpro.com/Microsite-EONONE-pro for complete documentation.
JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 USA © 2017 Harman International Industries, Incorporated
6. SET OUTPUT LEVEL
1. Set the Channel Volume Controls (F)
to12 o’clock.
2. Slowly turn the Master Volume Control
(N) to the right until the desired volume is
reached.
3. Fine tune the Channel Volume Controls
(F) for the desired mix balance.
4. Enjoy your audio!
This device supports Bluetooth audio
streaming.
To connect your device:
1. Turn on Bluetooth on your source device.
2. Press the Bluetooth Pair Button (O).
3. Find JBL EON ONE PRO on your device
and select.
5. BLUETOOTH AUDIO
K
M
L
R
B
A
C
F
H
J
G
D
E
I
O
P
Q
S
U
W
T
V
N
Power LED
Limit LED
Battery Level Meter
Stereo 1/8” Line Input
Master Volume
Bluetooth Pair Button
Ch. 1/2 Phantom
Power On/Off
Ch. 3/4 HI-Z
On/Off
Stereo RCA Input
Pass Thru Output
Power Receptacle
USB Power
Voltage Selector
Bass
Treble
Reverb Level
Channel Volume
Monitor Out
Volume
Power Switch
Channel Inputs
Reverb On/Off
Mic/Line
Stereo RCA
Outputs
4. POWER ON THE UNIT
1. Flip on the Power Switch (J); the Power
LED (K) and the Power LED on the front
of the speaker will illuminate.
EON ONE PRO Quickstart Guide Rev A
/