If you require any technical guidance or find that your washing machine is not
operating as intended, a simple solution can often be found in the troubleshooting
section of the Owner’s Manual.
For further assistance, feel free to contact us at 1-866-646-4332 with the following
information ready:
(You can find it on XXX)
Model No. Serial No.CDC22P1AWW
Date of Purchase
You’ll soon be enjoying your new appliance
Quick connect hose components as follows
Common connect hose as follow
Back of dishwasher
Connect the circular connection of the inlet hose onto the shorter male of
the quick connect.
Attach the quick connect onto the faucet adapter by pulling down the locking
collar on the quick connect.
Slowly open the hot water line and check for any sign of water leaks at all
hose connections.
IMPORTANT:
Once you open the water supply line, the inlet hose will be pressurized.
If you want to remove the quick connect from faucet adapter, please close
the faucet first and then press the red pressure relief button to relieve water
pressure before taking off the quick connect.
Take the existing aerator off your faucet.
Screw the faucet adapter onto (or into) the faucet tap.
Check for leaks (Use Teflon tape to eliminate if necessary).
IMPORTANT:
Please confirm whether the supplied adapter is suitable for your faucet tap.
If not, please contact your local plumbing supply center where adapter is
available for purchase .
Power cord
Inlet port
Drain hose
Inlet Hose Faucet Adapter
METHOD 1 : Direct Connect with Faucet
Before first use :
Fill the dispenser of rinse aid and detergent
METHOD 2 : Connect Under Counter
Commonly seen error codes
Error Code
E1 Longer inlet time. Faucets is not opened, or water intake is
restricted, or water pressure is too low.
E3 Not reaching required
temperature. Malfunction of heating element.
E4 Overflow. Some element of dishwasher leaks.
Ed Failure of communication
between main PCB with
TFT PCB.
Open circuit or break of wiring for the
communication.
Description Possible Cause
Quick Connect
Inlet port
connection Quick connect
connection
Female threads
Male threads
Inlet hose
connection
Locking collar
Red pressure
relief button
Remove aerator
1
1
2
3
1
2
1
2
4
5
6
Screw adaptor
2
Drain hose
lnlet port
Faucet Adapter
Quick Connect
345
6
Sealing ring
Aerator
1
Inlet Hose
Inlet port
connection 59’’ inlet hose
Parts provided
Bringing it all together
2
Inlet Water Connection
We are always here to help
4
Troubleshooting
Back of dishwasher
Power cord
Inlet port
Drain hose
Problem
Let’s get started
Prss to turn ON/OFF
the dishwasher.
3
Using Your Dishwasher
1>ON/OFF
Press to Lock the program.
The related icon will
be lighted on screen.
4>Child Lock
2>Program
Press to start or pause the
dishwasher.
6>Start/Pause
Press to delay start your
dishwasher. Press once to
add 1 hour each time.
5>Delay
>>
>>
>>
Press to select Extra drying,
Extra cleaning or Express.
The related icon will
be lighted on screen.
3>Function
Connect the water supply hose to a threaded 3/4(inch) connector and make
sure that it is fastened tightly in place.
Connect the water drain hose. The drain hose must be correctly fitted to avoid
water leaks. Ensure that the water drain hose is not kinked or crushed.
IMPORTANT:
If the water pipes are new or have not been used for an extended period of time,
let the water run to make sure that the water is clear and free of impurities. If
this precaution is not taken, there is a risk that the water inlet can get blocked
and damage the appliance. Please securely fix the drain hose in either position
A or position B.
IMPORTANT:
If your inlet hose is not a 3/4 inches male threaded, you'll need an adapter to
ensure a proper fit.
IMPORTANT:
To get the best performance from your dishwasher, read all operating instructions
before using it for the first time. Clean up any rinse aid spilled during with an
absorbent cloth to avoid excessive foaming during the next wash. Don’t forget to
replace the dispenser's cap before you close dishwasher door.
B
A
Counter
Drain hose
40 mm
lnlet port
only for male ¾“
Connect the star-shaped connection of the inlet hose onto the inlet port on
the back of dishwasher.
Press to select wash cycles.
The related icon will
be lighted on screen.
…is how I clean!
CDC22P1AWW
This guide will help you get started, for full details,
please refer to the instruction manual.
Quick Connection
Installation Guide
Customer Assistance
1-866-646-4332
Thank you so much for choosing
Comfee’ appliances.
We really appreciate your choice
and would love to help you get started.
1
Comfee’ CDC17P0ABB User manual
Montgomery Ward FD051B_MW User manual
EdgeStar RP400MED User manual
KoldFront PDW60EB Owner's manual
SPT SD-2224DSB Owner's manual
Whynter CDW-6831WES User manual
EdgeStar DWP62SV Owner's manual
