MANIA Orchard Pro Grafting and Pruning Tool Operating instructions

INSTRUCTIONS

ORCHARD PRO GRAFTING AND

PRUNING TOOL

PACKAGE CONTENTS

• Storage bag

• Grafting and pruning tool

• 2 × replacement grafting blades

• Wrench

• Phillips head screwdriver

TECHNICAL SPECIFICATIONS

• Size: 9.5 × 21 cm

• Material: high carbon steel, ABS

CHANGING THE GRAFTING BLADE

• To change the grafting blade, use the

included tools and remove the screw holding

the grafting blade in place (pictured below).

• Then remove the grafting blade from the

slot and insert a new one from the storage

pouch.

• Slide it into the slot and position it above the

pruning blade in such a way that the screw

goes through the holes in both blades and

holds them together.

• Tighten the screw.

• The new grafting blade is now ready for use.

WARNINGS

• Wear safety gloves when using the tool.

• Do not put your fingers anywhere near the

sharp blades when using the tool. This may

result in serious injury.

• Store out of children’s reach.

• Do not modify the tool in any way.

WARRANTY

The warranty is valid for 24 months. You can claim it

from DFVU d.o.o., Liparjeva 6a, 1234 Mengeš,

Slovenia, for a replacement product or a refund.

Send us your order number and purchase date in the

email, which is available by clicking on our logo in the

bottom right corner. The product has a lifetime of 24

months from the date of collection.