Sercomm CAP1800-AX User guide

Type
User guide

Sercomm CAP1800-AX is a high-speed 802.11ax extender that boosts your existing WiFi coverage and enhances the connection between your WiFi router and wireless devices. With easy setup options like WPS button or web browser configuration, you can enjoy seamless connectivity in no time. Experience improved wireless features like 11ax WiFi compatibility and WPS support, ensuring a reliable and secure connection for all your devices.

Sercomm CAP1800-AX is a high-speed 802.11ax extender that boosts your existing WiFi coverage and enhances the connection between your WiFi router and wireless devices. With easy setup options like WPS button or web browser configuration, you can enjoy seamless connectivity in no time. Experience improved wireless features like 11ax WiFi compatibility and WPS support, ensuring a reliable and secure connection for all your devices.

CAP1800-AX Quick Start Guide
Document Version: 1.0
Copyright 2020. All Rights Reserved.
All trademarks and trade names are the properties of their respective owners
The following items are included in the box:
1. CAP1800-AX
2. Quick Start Guide
3. Power adapter
/
4. Ethernet cable
If any of these items are damaged or missing, please contact your service
provider immediately
Chapter 1
Introduction
This chapter provides details of the CAP1800-AX's features, components, and
capabilities
Overview
The CAP1800-AX is designed to enhance the connectivity between your WiFi router
and wireless client device while increasing the coverage of your existing WiFi network.
With its simple setup, this high-speed 802.11ax extender works seamlessly with most
routers.
Features
Easy Setup: WPS button setup or web browser configuration
Wireless Features
Supports 11ax WiFi: 802.11ax is backwards compatible with 802.11a/b/g/n/ac
WPS Support: WPS (WiFi Protected Setup) simplifies the process of connecting
any device to the wireless network by using the push button on the device
Chapter 2
Basic set up
Step 1: Make sure the WiFi router is on and working properly.
Step 2: Plug the CAP1800-AX near the WiFi router during setup.
Step 3: Wait for the CAP1800-AX to boot up
Step 4: Connect an Ethernet cable to the CAP1800-AX and your PC.
Step 5: Launch the browser to do set up .
Step 6: You will be prompted for a username and password
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
Country Code selection feature to be disabled for products marketed to the US/CANADA
Operation of this device is restricted to indoor use only
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Sercomm CAP1800-AX User guide

Type
User guide

Sercomm CAP1800-AX is a high-speed 802.11ax extender that boosts your existing WiFi coverage and enhances the connection between your WiFi router and wireless devices. With easy setup options like WPS button or web browser configuration, you can enjoy seamless connectivity in no time. Experience improved wireless features like 11ax WiFi compatibility and WPS support, ensuring a reliable and secure connection for all your devices.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI