2. Phanteks
  3. MG-NE520A
MG-NE520A

Phanteks MG-NE520A, MG-NE520S User manual

  • Hello! I'm ready to assist you with your MetallicGear NEO chassis installation. I've reviewed the installation manual, which includes details on fan and radiator support, front I/O connections, and cable management. I can answer questions about hardware compatibility, lighting controls, and other aspects of your NEO NE520S, NEO NE520A, or NEO NE520G build.
  • What is the maximum CPU Cooler height?
    What is the maximum GPU length?
    What is the maximum PSU length?
    What types of motherboards are supported?
    What is the maximum front radiator size?
INSTALLATION MANUAL
MANUAL - V1.2MG-NE520S
MG-NE520A
MG-NE520G
Thank you for choosing the MG NEO chassis. Please check your model type (NEO-G/Air / Silent) and
take your time reading this manual before installing your system.
Check www.metallicgear.com for the latest information and manual version.
FANS & RADIATOR SUPPORT:
FRONT
2x 120
2x 140
REAR
1x 120
TOP
2x 120
2x 140
FRONT RADIATOR: 240rad: max 124x320 mm
280rad: max 144x320 mm
FRONT I/0:
21x Motherboard/SSD screws
4x PSU 6-32 screws
8x Fans screws
1x Motherboard M4 stand-off
2x Long Thumb 6-32 screws
6x Zip ties
ACCESSORIES
1. Headphone
2. Microphone
3. 2x USB 3.0
4. Reset Button
5. RGB Color/Mode
6. D-RGB Mode
7. D-RGB Color
8. Power Button
CLEARANCES
CPU Cooler height: 170 mm
GPU length: 400 mm
PSU length: 250 mm
ATX Motherboard width: 280 mm
Vertical GPU ready: yes
OVERVIEW
3.
1.
8.
7.
6.
2.
3.
1.
8.
5.
4.
2.
3.
1.
8.
4.
2.
Connect to
Power Supply
Motherboard header:
9x 4x
4x
Supports:
*E-ATX, ATX, m-ATX, ITX
(*E-ATX up to 280mm width)
Use the velcro straps and zip ties to
tighten the cables.
HARDWARE INSTALLATION
MOTHERBOARD POWER SUPPLY
SSD HDD
FRONT I/O CABLES CABLE MANAGEMENT
Remove the SSD
bracket first.
3
1
2
Power LED
Reset SW
HD
AUDIO
USB 3.0
Power SW
Connect to
Motherboard
NEO-G/Air only
NEO Silent/Air only
NEO Silent only
POWER
LED
POWER
SWITCH
NOT USED
HDD
LED
RESET
SWITCH
(NEO-G and NEO AIR only)
LIGHTING CONTROLS
Daisy-chain RGB Products
Solid
Breathing
Color Cycle
Short Press to change color:
Long Press to change mode:
Press and Hold to turn off/switch
to motherboard control.
RGB-Control Button
RGB CABLES RGB CONTROL
D-RGB Color
Button
D-RGB Mode
Button
MOTHERBOARD
D-RGB HEADER
To Motherboard D-RGB Header 5V
D-RGB CABLES D-RGB CONTROL
Solid
D-RGB Color Effects
Radar
Sparkle
Breathing
Rainbow
Press and Hold the D-RGB Mode button to turn off/switch
to motherboard control.
/