Page is loading ...
!
accordlighting.com
ACCORD Lighting reserves the right to change the dimensions and specifications contained in this manual without prior notice, in accordance with its policy of continuous product improvement. Please, contact the
manufacturer if additional information is necessary. The illustrations in this manual are for guidance only and may vary in scale, dimensions and model details.
The responsability of the manufacturer regarding the product warranty is related to the
correct observation of the instructions contained in this manual.
The manufacturer is not responsible for any damage to the product caused by
accidents, alterations of any kind, improper usage or improper installation.
See the website for additional warranty details.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ACCORD Lighting guarantees coverage against manufacturing defects including
electrical components and finishes, for a period of three years, under normal
use, from the date of purchase. For warranty service, please contact your local
dealer for further instructions. Proof of date of purchase will be required for
validation of warranty service.
ATENTION!
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY
CAUSE ACCIDENTS AND LOSS OF PRODUCT WARRANTY.
Its recommended to read these instructions completely and carefully
before proceeding.
USA & CANADA
ASSEMBLY INSTRUCTIONS
Ensure that the rated luminaire voltage requirements are compatible with the available
mains supply in which it will be installed.
All LEDS are included in your lamp. Never touch the LED surface with your bear hands as
this may reduce the life of your LED.
Do not alter, relocate or remove any electrical component.
WARNING!
Be sure electrical power is OFF before and during installation or maintenance.
The luminaire must be installed by a qualified electrician, in accordance with all applicable
local codes.
A
DETAIL F
SCALE 1 : 12
SCREW
H
DETAIL H
SCALE 1 : 8
SCREW
ASSEMBLING THE FIXTURE
Read carefully all the Assembly Instructions below, before
starting the installation process.
Remove the protecting package from the pieces taking care
to not harm any parts with cutting surfaces or objects. Lay
the parts of the fixture on some horizontal surface in order
to connect them.
Notice that the fixture is disassembled in three separate
parts which are wrapped with the protecting package. The
fixture base (A), stem (B) and disk (C), must be assembled
together by the user, throught the following steps:
Insert the metallic stem(B) in the base(A), joining both
together with the supplied screws.
Fit the two connectors that come out of the stem with it's
relative terminals, which can be identidfied by it's size. On
that way, the functioning of electrical circuits and touch
switch, will be enabled.
Once the electrical connections are made, close the lower
part of the base inserting the bottom cover and locking it
with the provided screws.
1
2
3
1
A
B
C
B
2
3
3039
LED
Natural Wood Veneer MDF and Acrylic
Line:
Family:
Description:
Material:
Weight:
Naiá Accord Floor Lamp 3039
Naiá
Floor Lamp
!
accordlighting.com
ACCORD Lighting reserves the right to change the dimensions and specifications contained in this manual without prior notice, in accordance with its policy of continuous product improvement. Please, contact the
manufacturer if additional information is necessary. The illustrations in this manual are for guidance only and may vary in scale, dimensions and model details.
The responsability of the manufacturer regarding the product warranty is related to the
correct observation of the instructions contained in this manual.
The manufacturer is not responsible for any damage to the product caused by
accidents, alterations of any kind, improper usage or improper installation.
See the website for additional warranty details.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ACCORD Lighting guarantees coverage against manufacturing defects including
electrical components and finishes, for a period of three years, under normal
use, from the date of purchase. For warranty service, please contact your local
dealer for further instructions. Proof of date of purchase will be required for
validation of warranty service.
ATENTION!
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY
CAUSE ACCIDENTS AND LOSS OF PRODUCT WARRANTY.
Its recommended to read these instructions completely and carefully
before proceeding.
USA & CANADA
ASSEMBLY INSTRUCTIONS
Ensure that the rated luminaire voltage requirements are compatible with the available
mains supply in which it will be installed.
All LEDS are included in your lamp. Never touch the LED surface with your bear hands as
this may reduce the life of your LED.
Do not alter, relocate or remove any electrical component.
WARNING!
Be sure electrical power is OFF before and during installation or maintenance.
The luminaire must be installed by a qualified electrician, in accordance with all applicable
local codes.
DETAIL B
SCALE 1 : 2.5
ELECTRICAL CABLE
LOCKING SCREW
DETAIL B
SCALE 1 : 7
SCREW
DETAIL I
SCALE 1 : 5
4
With the fixture's stem and base already assembled, fit the
connector located at the other tip of the stem with it's
relative terminal, which comes out of the disk metallic
support.
Once the connectors are plugged,carefully insert the
connectors and excess cable inside the inferior metallic
steem, then insert the metallic support which holds the
disk, in the same steem.
fasteen the supplied locking screw on the metallic steem in
order to lock the metallic support to it, so that the parts
don't detach from each other.
Plug it into a proper electrical outlet.
Your luminaire is now ready for use.
USER INSTRUCTIONS
Press and release the touch switch to turn the fixture ON
and OFF.
The touch switch also works as a dimmer, so press and
hold the touch switch to increase and decrease the
luminous flux as desired.
4
5
6
7
5
6
7
3039
LED
Natural Wood Veneer MDF and Acrylic
Line:
Family:
Description:
Material:
Weight:
Naiá Accord Floor Lamp 3039
Naiá
Floor Lamp
/
