Ensure your device is connected to the
internet. Then go to the app store on your
device. Search “asTech” to find and install
the app.
2
Application
Quick Start Guide
Download the new
asTech App
Register your asTech account via the email
you received from [email protected]
with the subject line “You've been added to
an asTech account”.
Note: To request another registration email
go to www.astech.com/registration.
1Create an
asTech account
Plug your asTech Device into a vehicle and
set the ignition to “on”, engine off. An
IP Address, VIN and “Connected & Waiting”
should appear on the device screen. The
device is now ready to use.
Note: Connecting a battery support device
to the vehicle is recommended.
Enable Bluetooth on your mobile device.
3Plug your asTech device
into a vehicle
4Enable Bluetooth
On the device, tap the asTech icon to
launch the app. On the login screen, type
your user name and password created for
your asTech account.
That’s it! You are ready to scan a vehicle.
You can reach Customer Service at:
1-888-486-1166 or
5Launch the asTech App
-
1
-
2
ASTECH Connect User guide
- Type
- User guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Mastech MS922D User manual
-
Dressler HPG 13150 400 V User manual
-
Toyota Highlander HV Owner's manual
-
-
-
Jeep Renegade Owner's manual
-
Uconnect 8.4A Owner's Manual Supplement
-
Dodge 2015 2500 Owner's manual
-
Chrysler 8.4A Owner's manual
-
Dodge VIPER User guide
