Angelo Decor AD93253 Operating instructions
- Type
- Operating instructions
Thank you for buying an Angelo Decor Fountain!
We hope you will find these instructions helpful in setting up your fountain.
If
y
ou have an
y
issues with this item, please DO NOT return the unit to place of purchase.
Please visit our web site, www.an
g
elodecor.com, for assistance and warrant
y
information.
First unpack carton carefully, arranging parts safely in your working area.
Connect the pump to the tubing Place the pump inside the access
at the rear of the fountain and hole and set firmly on the base of the
set the pump to the desired setting. fountain.
Guide the light cord through the Reach in the access hole at the rear Connect the light
opening at the front as shown of the fountain and pull the excess cord to the
above. cord through. transformer.
Adjust the light to the desired angle. Add decorative rocks as desired.
Final assembly should look like this
Now simply fill with clean water and plug into a grounded GFCI outlet
We recommend keeping bowl 3/4 full of water to avoid pump burnout.
-
1
